scholarly journals Investigation of Bunch Cut at Different Times After Pollination and Flower Position in the Spikelet in Date Palm ‘Sukkary’ Variety

2020 ◽  
pp. 713-723
Author(s):  
Abdelazize ElJiati
Keyword(s):  
Room Temperature ◽  
Date Palm ◽  
Fruit Set ◽  
Fruit Size ◽  
Labor Cost ◽  
Fruit Weight ◽  
Adult Tree ◽  
Fresh Pollen ◽  
One Year ◽  
Flower Position

As many studies on other crops showed an acropetal decline of fruit-set and fruit size in the inflorescence, this paper investigates the effect of flower position in spikelets in the ‘Sukkary’ variety of date palm on fruit-set and final fruit weight. Also studied was the best time to apply strand-cut (bunch cut) as an alternative to hand thinning, to increase final fruit weight. Hand thinning is a labor cost operation and worker productivity operation is one adult tree per day maximum. To study fruit-set in relation to fruit position, three types of pollen were used to pollinate female trees: new pollen harvested in March 2018, pollen stored for one year at room temperature (25-35° C), and pollen stored for two years at room temperature. Four weeks after pollination, fruits aborted and those non-aborted in every bunch were counted. Recording was done in every spikelet from proximal to distal. To study the effect of fruit position in spikelet on fruit weight, fresh pollen was used to pollinate ‘Sukkary’ females. Every two days, fruit weight was measured from pollination to harvest, and fruit growth pattern was drawn. An analysis of variance (ANOVA) was carried out for the final fruit weight in every spikelet part. This investigation showed no pattern in fruit-set or in final fruit weight when using new pollen. When pollinated with old pollen that was one and two years old, the proximal ‘Sukkary’ flowers of the spikelets showed less fruit-set compared to those of the middle and distal part. This basipetal decline is explained by low viability of old pollen, combined with the basipetal opening of the spathes in date palm...

Flowering and Fruiting of `Burlat' Sweet Cherry on Size-controlling Rootstock

HortScience ◽  
1994 ◽  
Vol 29 (6) ◽  
pp. 611-612 ◽  
Author(s):  
Frank Kappel ◽  
Jean Lichou
Keyword(s):  
Sweet Cherry ◽  
Prunus Avium ◽  
Fruit Set ◽  
Fruit Size ◽  
Fruit Weight ◽  
Prunus Cerasus ◽  
Sweet Cherries ◽  
One Year ◽  
Size Controlling

The effect of rootstock on the flowering and fruiting response of sweet cherries (Prunus avium L.) was investigated using 4-year-old branch units. The cherry rootstock Edabriz (Prunus cerasus L.) affected the flowering and fruiting response of `Burlat' sweet cherry compared to Maxma 14 and F12/1. Branches of trees on Edabriz had more flowers, more flowers per spur, more spurs, more fruit, higher yields, smaller fruit, and a reduced fruit set compared to the standard rootstock, F12/1. One-year-old branch sections had more flowers and fruit, higher fruit weight, and heavier fruit size compared to older branch portions.

The effects of date pollinizer variety and pollination time on fruit set and yield of Medjhol date palm

2014 ◽  
Vol 2 (2) ◽  
pp. 67-71 ◽  
Author(s):  
Abdoul Amir Rahnama ◽  
Esmaeil Rahkhodaei
Keyword(s):  
Date Palm ◽  
Fruit Set ◽  
Block Design ◽  
Male Flower ◽  
Fruit Weight ◽  
Palm Fruit ◽  
Tropical Fruit ◽  
Male And Female ◽  
Time Interaction ◽  
Female Flowers

Date palm is unisexual, being either male or female. Male and female flowers grow on buds called Spathe, which opens naturally when fully mature. It is easy to identify the male and female flowers. Under the method of manual pollination, pollen from a male flower is smeared over female flowers. The pollen variety and pollination time have important effects on date palm fruit set, yield and quality. This experiment was carried out to study the effect of date pollinizer variety and pollination time on fruit set, growth and development of Medjhol date palm variety, in date palm garden of date palm and tropical fruit research institute of Iran during three years from 2009 to 2011. The trail was randomized complete block design in factorial manner with three pollen variety as Ghaname, Vardy, and Samesmave, two pollination time as 1-3 days before or after spathe opening and four replication. The results showed that the Vardy pollen had significant effects and increased the fertility percent and fruit yield, rather than two other pollen varieties. The pollen variety had no significant effects on fruit quality as total sugar, acidity, and bricx. The pollination time before spathe opening significantly increased fertility percent, decreased fruit weight and date palm yield. Finally the pollen variety and pollination time interaction effects showed that, application of Vardy pollen from 1-3 days after spathe opening with the most production date palm yield, equal 19.9 kilogram per any date palm trees, so this treatment is the best and are recommended.

scholarly journals Optimizing Fruit-Thinning Strategies in Peach (Prunus persica) Production

Horticulturae ◽  
2020 ◽  
Vol 6 (3) ◽  
pp. 41 ◽  
Author(s):  
Mary Sutton ◽  
John Doyle ◽  
Dario Chavez ◽  
Anish Malladi
Keyword(s):  
Fruit Development ◽  
Fruit Size ◽  
Fruit Weight ◽  
Load Management ◽  
Growth Responses ◽  
Crop Load ◽  
Fruit Number ◽  
Fruit Thinning ◽  
Adverse Weather ◽  
One Year

Fruit size is a highly valued commercial trait in peach. Competition among fruit and among other sinks on a tree reduces potential growth rate of the fruit. Hence, crop-load management strategies such as thinning (removal of flowers or fruit) are often practiced by growers to optimize fruit size. Thinning can be performed at bloom or during early fruit development and at different intensities to optimize fruit growth responses. Responses to thinning may be cultivar and location specific. The objective of the current study was to fine-tune thinning strategies in the southeastern United States, a major peach producing region. Timing and intensity of thinning were evaluated across multiple cultivars over three years. Thinning at bloom or at 21 d after full bloom (DAFB) improved fruit size in comparison to unthinned trees in ‘Cary Mac’ and ‘July Prince’, respectively, in one year. Bloom-thinning reduced fruit yield (kg per tree) in the above cultivars in one year, suggesting that flower thinning alone may not be a viable option in this region. Intensity of thinning, evaluated as spacings of 15 cm and 20 cm between fruit, did not differentially affect fruit weight or yield. However, fruit diameter decreased quadratically with increasing fruit number per tree in ‘Cary Mac’, ‘July Prince’ and ‘Summer Flame’. Similarly, fruit weight decreased quadratically in response to increase in fruit number per tree in ‘Cary Mac’ and ‘July Prince’. Further, yield-per-tree decreased with increasing fruit size in ‘Cary Mac’ and ‘July Prince’. Importantly, these relationships were cultivar specific. Together, the data suggest that achieving a target fruit number per tree is an effective strategy for crop-load management to optimize fruit size in southeastern peach production. The target fruit number per tree may potentially be achieved through a combination of flower and fruit-thinning during early fruit development. Such an approach may provide flexibility in crop-load management in relation to adverse weather events.

scholarly journals Flowering period and fruit quality of peach trees selections and cultivars in the metropolitan region of Curitiba

2018 ◽  
Vol 40 (3) ◽  
Author(s):  
Giselda Alves ◽  
Jhulia Gelain ◽  
Gloria Soriano Vidal ◽  
Cristiano Nunes Nesi ◽  
Louise Larissa May De Mio ◽  
...  
Keyword(s):  
Skin Color ◽  
Fruit Set ◽  
Fruit Size ◽  
Titratable Acidity ◽  
Physicochemical Characteristics ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Metropolitan Region ◽  
Flowering Period ◽  
Peach Trees

Abstract This study aimed to evaluate the flowering period and the physicochemical characteristics of peaches, aiming to find those most promising for the diversification of the peach crop in the Metropolitan Region of Curitiba, Paraná State. We evaluated 8 selections and three cultivars in Porto Amazonas and 10 cultivars in Araucaria for flowering period, fruit set, diameter and height of fruit, average fruit weight, the skin color, soluble solids (SS), titratable acidity (TA), ratio SS/ TA, hydrogen potential (pH). The flowering period occurred between late June and late September ranging from 16 to 25 days. The fruit set rate was greater than 50% for ‘Cascata 1513’, ‘Cascata 1429’, ‘Cascata 1577’, ‘Cascata 1743’ and for all cultivars in Araucaria. There were significant differences for the other variables assessed. It was concluded that in Araucária, ‘Charme’ and ‘Chimarrita’ are good planting options, have the same duration of the cycle (111 days), being ‘Charme’ a little later. Besides these, ‘Douradão’ and ‘Rubimel’ have good fruit size, moderate acidity and best SS/TA ratio, being earlier than the previous ones. ‘PS 25399’ is the earliest and showed reddish epidermis and great consumer interest. In Porto Amazonas, selections and cultivars tested produced little fruit of small size, being required more studies to be recommended in these area.

scholarly journals EFFECTS OF HYDROGEN CYANAMIDE ON APPLE AND PLUM FRUIT THINNING

HortScience ◽  
1992 ◽  
Vol 27 (6) ◽  
pp. 690a-690
Author(s):  
Esmaeil Fallahi ◽  
Brenda R. Simons ◽  
John K. Fellman ◽  
W. Michael Colt
Keyword(s):  
Malus Domestica ◽  
Fruit Set ◽  
Fruit Size ◽  
Apple Fruit ◽  
Fruit Weight ◽  
Full Bloom ◽  
Hydrogen Cyanamide ◽  
Fruit Thinning ◽  
Prunus Salicina

Influence of various concentrations of hydrogen cyanamide (HC) on fruit thinning of `Rome Beauty' apple (Malus domestica Borkh.), `Friar,' and `Simka' plums (Prunus salicina Lindley) were studied. A full bloom application of HC at all tested concentrations decreased `Rome Beauty' apple fruit set and yield, and increased fruit weight. Hydrogen cyanamide at 0.25% (V/V) resulted in adequate apple thinning, indicated by the production of an ideal fruit weight. Prebloom and full bloom applications of HC at greater than 0.75% reduced plum fruit set and yield in `Friar.' Full bloom application of HC at 0.25% to 0.50% showed a satisfactory fruit set, yield, and fruit size in `Friar' plum. Full bloom application decreased fruit set and yield in `Simka' plum. Hand thinning, as well as chemical thinning, is recommended for plums.

scholarly journals Regulating Budbreak, Flowering, and Fruit Maturity in Sweet Cherry (Prunus avium L.) cv. `Bing' by Surfactant and Nitrate Applications

HortScience ◽  
1996 ◽  
Vol 31 (4) ◽  
pp. 603e-603
Author(s):  
K.G. Weis ◽  
S.M. Southwick ◽  
J.T. Yeager ◽  
W.W. Coates ◽  
Michael E. Rupert
Keyword(s):  
Sweet Cherry ◽  
Prunus Avium ◽  
Fruit Set ◽  
Fruit Size ◽  
Calcium Nitrate ◽  
Potassium Nitrate ◽  
Fruit Weight ◽  
Full Bloom ◽  
Fruit Maturity ◽  
Flower And Fruit Development

The years 1995 and 1996 were low chill years in California with respect to stone fruit dormancy. Advancing reproductive budbreak and flowering was accomplished in `Bing' cherry (Prunus avium) by single-spray treatments of a surfactant {a polymeric alkoxylated fatty amine [N,N-bis 2-(omega-hydroxypolyoxyethylene/polyoxypropylene) ethyl alkylamine]} and potassium nitrate in combination when applied at “tightbud,” ≈ 42 days (1 Feb. 1995) before full bloom and with surfactant and potassium nitrate in combination when 10% green calyx was apparent, 33 days before full bloom. Applying 2% surfactant (v/v) + 6% potassium nitrate (w/v) was most effective in advancing bloom, speeding progression through bloom, and advancing fruit maturity when applied at tightbud stage. Surfactant (2% or 4%) applied with 25% or 35% calcium nitrate (w/v) on 2 Feb. 1996 significantly advanced full bloom compared to nontreated controls. Fruit maturity (1995) was somewhat advanced by surfactant–nitrate treatments, but fruit set and final fruit weight were equivalent among treatments. No phytotoxicity was noted in foliage or fruit. In California, marginal and insufficient winter chilling often causes irregular, extended, or delayed bloom periods, resulting in poor bloom-overlap with pollenizers. As a result, flower and fruit development may be so variable as to have small, green and ripe fruit on the same tree, making harvest more time consuming and costly. Data indicate that this surfactant, in combination with a nitrogenous compound, has potential to advance reproductive budbreak and advance maturity in sweet cherry without reducing fruit set or fruit size. Advancing the ripening time of sweet cherry even 2 to 3 days can increase the price received per 8.2-kg box by $10 to $20.

scholarly journals Effective Pollination Period of Actinidia chinensis ‘AU Golden Sunshine’ and A. deliciosa ‘AU Fitzgerald’ Kiwifruit

HortScience ◽  
2019 ◽  
Vol 54 (4) ◽  
pp. 656-660
Author(s):  
Ashley K. Brantley ◽  
James D. Spiers ◽  
Andrew B. Thompson ◽  
James A. Pitts ◽  
J. Raymond Kessler ◽  
...  
Keyword(s):  
Fruit Set ◽  
Linear Trend ◽  
Fruit Size ◽  
Fruit Weight ◽  
Open Pollination ◽  
Seed Number ◽  
Alternate Bearing ◽  
Size Index ◽  
Days After Anthesis ◽  
Female Flowers

Commercial kiwifruit production often requires substantial inputs for successful pollination. Determining the length of time that female flowers can be successfully pollinated can aid management decisions concerning pollination enhancement. The purpose of this research was to determine the effective pollination period (EPP) for ‘AU Golden Sunshine’ and ‘AU Fitzgerald’. Either 30 (2013) or 32 (2014, 2015) flowers of ‘AU Golden Sunshine’ were hand pollinated each day for 1 to 5 (2013) days after anthesis (DAA) or 1 to 7 DAA (2014, 2015), and then isolated to prevent open pollination. Anthesis was considered the day the flower opened. Similarly, ‘AU Fitzgerald’ flowers were pollinated and then isolated 1 to 6 DAA in 2013 and 1 to 7 DAA in 2015. For ‘AU Golden Sunshine’ in 2013, fruit set was consistent over the 5-day period, but fruit weight, fruit size index, and seed number decreased between 1 and 3 and 4 and 5 DAA. In 2014, fruit set decreased between 1 and 6 and 7 DAA, whereas fruit weight, fruit size index, and seed number each decreased in a linear trend. In 2015, fruit set also decreased between 1 and 6 and 7 DAA, whereas all other responses decreased linearly. Based on fruit set in 2014 and 2015, the EPP for ‘AU Golden Sunshine’ was 6 DAA. The EPP for ‘AU Fitzgerald’, however, was more variable. In 2013, fruit weight, fruit size index and seed number decreased between 1 and 4 and 5 and 6 DAA, suggesting that the EPP was 4 DAA. In 2015, fruit set remained consistent over the 7-day period with fruit weight, fruit size index, and seed number decreasing linearly. Differences in temperature and the alternate bearing tendency of kiwifruit species likely contributed to the discrepancies between the years for the EPP. For each cultivar, reductions in fruit weight, size, and seed number were observed before an observed decrease in fruit set. Greater fruit weight, size, and seed number were observed when flowers were pollinated within the first few DAA, with results varying thereafter.

A STUDY OF THE ASSOCIATION BETWEEN EARLINESS, FRUIT SIZE AND EARLY YIELD IN DETERMINATE TOMATOES

1962 ◽  
Vol 42 (4) ◽  
pp. 635-641
Author(s):  
C. C. Beknier ◽  
A. C. Ferguson
Keyword(s):  
Selection Criteria ◽  
Fruit Set ◽  
Fruit Size ◽  
Fruit Weight ◽  
Ripe Fruit ◽  
Weight Data ◽  
Combining Information

The association between fifteen developmental characters and earliness, fruit size and early yield in six determinate tomato varieties was studied in 1958 to evaluate these characters as selection criteria. The number of ripe fruit produced by September 1 was used as the measure of earliness and the weight of ripe fruit as the measure of early yield.Number of fruit set on July 1 and on July 15 were associated with earliness and early yield in all varieties. In four varieties, days to three ripe fruit was negatively correlated with earliness; the association being strongest in the later varieties. Little association existed between earliness and days to first flower or days to first ripe fruit.Early yield was strongly associated with weight of first four ripe fruit in five varieties and with weight of ripe fruit produced on the first cluster, in three varieties. Fruit weight data taken at earlier stages showed little if any association with early yield.This study indicates that early large-fruited, high-yielding tomato lines can be selected through combining information on early fruit set and size of the first four ripe fruit.

scholarly journals Flower Position and Size Impact Ovule Number per Flower, Fruitset, and Fruit Size in Pomegranate

2013 ◽  
Vol 138 (3) ◽  
pp. 159-166 ◽  
Author(s):  
Hazel Y. Wetzstein ◽  
Weiguang Yi ◽  
Justin A. Porter ◽  
Nadav Ravid
Keyword(s):  
Fruit Set ◽  
Fruit Size ◽  
Sex Expression ◽  
Fruit Production ◽  
Fruit Weight ◽  
Flower Size ◽  
Ovule Development ◽  
Flower Type ◽  
Male Flowers ◽  
Flower Quality

Pomegranate trees (Punica granatum) produce large numbers of both hermaphroditic (bisexual) flowers that produce fruit and functionally male flowers that characteristically abort. Excessive production of male flowers can result in decreased yields resulting from their inability to set fruit. Within hermaphroditic flowers, sex expression appears to follow a spectrum ranging from those exhibiting strong to weak pistil development. Unknown is the scope that flower quality plays in influencing fruit production. A description of floral characteristics and how they vary with flowers of different sizes and positions is lacking in pomegranate and was the focus of this study. Furthermore, the effects of flower size and position on fruit set and fruit size were evaluated. This study documents that flower size characteristics and ovule development can be quite variable and are related to flower type and position. Single and terminal flowers within a cluster were larger than lateral flowers. In addition, lateral flowers exhibited a high frequency of flowers with poor ovule development sufficient to negatively impact fruiting in that flower type. Ovule numbers per flower were significantly influenced by flower size with more ovules in larger flowers. Pollination studies verified significantly higher fruit set and fruit weight, and larger commercial size distributions were obtained with larger vs. smaller flowers. Thus, flower quality is an important issue in pomegranate. Cultural and environmental factors that influence flower size and vigor may have a direct consequence on fruit production and yield.

scholarly journals The Combined Effects of Precision-Controlled Temperature and Relative Humidity on Artificial Ripening and Quality of Date Fruit

Foods ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2636
Author(s):  
Maged Mohammed ◽  
Abdelkader Sallam ◽  
Nashi Alqahtani ◽  
Muhammad Munir
Keyword(s):  
Weight Loss ◽  
Relative Humidity ◽  
Fruit Ripening ◽  
Date Palm ◽  
Fruit Size ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Palm Fruit ◽  
Set Point ◽  
Ripening Time

Due to climatic variation, in-situ date palm fruit ripening is significantly delayed, and some fruits (Biser) cannot become ripe naturally on the tree. Because of that issue, the vast quantity of produce is mere wasted. Few traditional methods are adopted to ripe these unripe fruits through open sun drying or solar tunnel dehydration techniques. However, these methods have minimal use due to ambient temperature and relative humidity (RH) instability. Therefore, the present study was designed to find a precise combination of temperature and RH to artificially ripe the unripe Biser fruits under controlled environment chambers. For that purpose, eighteen automated artificial ripening systems were developed. The Biser fruits (cv. Khalas) were placed immediately after harvesting in the treatment chambers of the systems with three set-point temperatures (45, 50, and 55 °C) and six set-point RH (30, 35, 40, 45, 50, and 55%) until ripening. The optimal treatment combination for artificial ripening of Biser fruits was 50 °C and 50% RH. This combination provided good fruit size, color, firmness, total soluble solids (TSS), pH, and sugars content. As a result, there was a reduction in fruit weight loss and had optimum fruit ripening time. On the other hand, low temperature and RH delayed the ripening process, deteriorated fruit quality, and caused more weight loss. Although the combination of the highest temperature and RH (55 °C and 55%) reduced ripening time, the fruits have higher weight loss and negative quality. Therefore, the artificial ripening of unripe date palm Biser fruits can be achieved using 50 °C temperature and 50% RH combination. These findings can be applied in the field using solar energy systems on a commercial scale to reduce the postharvest loss of date palm fruits.

Sign in / Sign up

Export Citation Format

Share Document