scholarly journals Design and implementation of Dual-Port Memory

2021 ◽  
Vol 23 (06) ◽  
pp. 1716-1722
Author(s):  
Chandrashekar C ◽  
◽  
Dr.Basavaraj I Neelgar ◽  
Keyword(s):  
Single Port ◽  
Memory Cell ◽  
Clock Pulse ◽  
Design And Implementation ◽  
Sram Cell

Multiport memory cell using a dual-port memory cell provides required access to multi-processor-based applications. Simultaneous access can be provided using two-pass transistors, pair of bit lines, and a word line. Using specific word lines and bit lines of SRAM cell access can be provided by using dual ports memory. The single address of a memory cell can be accessed at a time during each clock pulse using single-port SRAM this drawback can be overcome by using dual-port RAM which supports concurrent read or writes access at different addresses. Efficiency is improved by using dual-port RAM. Each processor can be made to operate at different clock frequencies thereby dual-port RAM will not have any limitations of access between the two ports.

scholarly journals Design and implementation of CNTFET based ternary 1x1 memories

2019 ◽  
Vol 8 (3) ◽  
pp. 175 ◽  
Author(s):  
S.Tamil Selvan ◽  
M. Sundararajan
Keyword(s):  
High Performance ◽  
Data Access ◽  
Cmos Technology ◽  
Access Time ◽  
The Novel ◽  
Design And Implementation ◽  
Technology Process ◽  
Sram Cell ◽  
And Performance ◽  
Power Application

In this paper presented Design and implementation of CNTFET based Ternary 1x1 RAM memories high-performance digital circuits. CNTFET Ternary 1x1 SRAM memories is implement using 32nm technology process. The CNTFET decresase the diameter and performance matrics like delay,power and power delay, The CNTFET Ternary 6T SRAM cell consists of two cross coupled Ternary inverters one is READ and another WRITE operations of the Ternary 6T SRAM cell are performed with the Tritline using HSPICE and Tanner tools in this tool is performed high accuracy. The novel based work can be used for Low Power Application and Access time is less of compared to the conventional CMOS Technology. The CNTFET Ternary 6T SRAM array module (1X1) in 32nm technology consumes only 0.412mW power and data access time is about 5.23ns.

Design of a Stable Low Power 11-T Static Random Access Memory Cell

2020 ◽  
Vol 29 (13) ◽  
pp. 2050206 ◽  
Author(s):  
Ashish Sachdeva ◽  
V. K. Tomar
Keyword(s):  
Random Access ◽  
Memory Cell ◽  
Random Access Memory ◽  
Static Random Access Memory ◽  
Signal To Noise ◽  
Access Memory ◽  
Noise Margin ◽  
Sram Cell ◽  
Variation Tolerance ◽  
Read Signal

In this paper, a 11-T static random-access memory (SRAM) cell has been examined that shows a fair reduction in read power dissipation while upholding the stability and moderate performance. In the presented work, parametric variability analysis of various design metrices such as signal to noise margin, read current and read power of the Proposed 11T cell are presented and compared with few considered topologies. The Proposed cell offers single ended write operation and differential read operation. The improvement in read signal to noise margin and write signal to noise margin with respect to conventional 6T SRAM is 10.63% and 33.09%, respectively even when the write operation is single ended. Mean hold static noise margin of the cell for 3000 samples is [Formula: see text] times higher than considered D2p11T cell. Sensitivity analysis of data retention voltage (DRV) with respect to temperature variations is also investigated and compared with considered topologies. DRV variation with temperature is least in FF process corner. In comparison to conventional 6T SRAM cell, the write and read delay of Proposed 11T cell gets improved by [Formula: see text] and 1.64%, respectively. Proposed 11T topology consumes least read energy in comparison with considered topologies. In comparison with another considered 11T topology, i.e., D2p11T cell, Proposed cell consumes 13.11% lesser area. Process variation tolerance with Monte Carlo simulation for read current and read power has been investigated using Cadence virtuoso tool with GPDK 45-nm technology.

scholarly journals FinFET SRAM cell with improved stability and power for low power applications.

2019 ◽  
Vol 14 (2) ◽  
pp. 1-8
Author(s):  
Shilpi Birla
Keyword(s):  
Memory Cell ◽  
Static Noise Margin ◽  
Noise Margin ◽  
Sram Cell ◽  
Improved Stability ◽  
Cell Stability ◽  
Subthreshold Voltage ◽  
The Stability ◽  
Subthreshold Operation ◽  
Static Noise

In this paper, a new 11T SRAM cell using Double gate FET (FinFET technology) has been proposed, cell basic component is the 6T SRAM cell with 4 NMOS access transistors to improve the stability over CMOSFET circuits and also makes it a dual port memory cell. The proposed cell also used a header scheme in which one extra PMOS transistor is used which is biased at different voltages to improve the read and write stability which helps in reducing the leakage current, active power. The cell shows improvement in RSNM (Read Static Noise Margin) with LP8T by 2.39x at threshold and subthreshold voltage 2.68x with D6T SRAM cell, 5.5x with TG8T. The WSNM (Write Static Noise Margin) and HM (Hold Margin) of the SRAM cell at 0.9V is 306mV and 384mV.At subthreshold operation also, it shows improvement. The Leakage power reduced by 0.125x with LP8T, 0.022x with D6T SRAM cell, TG8T and SE8T. Impact of process variation on cell stability also been analyzed.

scholarly journals VARIABILITY ANALYSIS OF 6T AND 7T SRAM CELL IN SUB-45NM TECHNOLOGY

2011 ◽  
Vol 12 (1) ◽  
pp. 13-30 ◽  
Author(s):  
Aminul Islam ◽  
Mohd. Hasan
Keyword(s):  
Random Access ◽  
Memory Cell ◽  
Static Random Access Memory ◽  
Access Time ◽  
Access Memory ◽  
Static Noise Margin ◽  
Noise Margin ◽  
Sram Cell ◽  
Pvt Variations ◽  
Static Noise

This paper analyses standard 6T and 7T SRAM (static random access memory) cell in light of process, voltage and temperature (PVT) variations to verify their functionality and robustness. The 7T SRAM cell consumes higher hold power due to its extra cell area required for its functionality constraint. It shows 60% improvement in static noise margin (SNM), 71.4% improvement in read static noise margin (RSNM) and 50% improvement in write static noise margin (WSNM). The 6T cell outperforms 7T cell in terms of read access time (TRA) by 13.1%. The write access time (TWA) of 7T cell for writing "1" is 16.6 x longer than that of 6T cell. The 6T cell proves it robustness against PVT variations by exhibiting narrower spread in TRA (by 1.2 x) and Twa (by 3.4x). The 7T cell offers 65.6% saving in read power (RPWR) and 89% saving in write power (WPWR). The RPWR variability indicates that 6T ell is more robust against process variation by 3.9x. The 7T cell shows 1.3x wider write power (WPWR) variability indicating 6T cell's robustness against PVT variations. All the results are based on HSPICE simulation using 32 nm CMOS Berkeley Predictive Technology Model (BPTM).

scholarly journals A Novel concept on 8-Transistor Dynamic Feedback Control on Static RAM Cell Array

2018 ◽  
Vol 7 (2.20) ◽  
pp. 109
Author(s):  
S Renukarani ◽  
Bhavana Godavarthi ◽  
SK Bia Roshini ◽  
Mohammad Khadir
Keyword(s):  
Dynamic Control ◽  
Random Access ◽  
Memory Cell ◽  
Dynamic Feedback ◽  
Cell Array ◽  
Static Noise Margin ◽  
Noise Margin ◽  
Sram Cell ◽  
Static Ram ◽  
Static Noise

A novel idea of 8-Transistor (8T) static random access memory cell with enhanced information stability, sub threshold operation may be outlined. Those prescribed novel built single-ended for dynamic control 8 transistors static RAM (SRAM) cell enhances the static noise margin (SNM) to grater low energy supply. The suggested 8T takes less read and write power supply compared to 6T. Those suggested 8T need higher static noise margin than that from 6T. The portable microprocessor chips need ultralow energy consuming circuits on use battery to more drawn out span. The power utilization might be minimized utilizing non-conventional gadget structures, new circuit topologies, and upgrading the architecture. Although, voltage scaling require of the operation completed over sub threshold for low power consumption, and there will be an inconvenience from exponential decrease in execution. However, to sub threshold regime, that data stability of SRAM cell might a chance to be a amazing issue and worsens for those scaling from claming MOSFET ought to sub-nanometer engineering technology.  

scholarly journals SRAM CELL 6T AND 8T PARAMETRIC STABILITY ANALYSIS

2021 ◽  
Vol I (I) ◽  
Author(s):  
Bharathabau K
Keyword(s):  
Stability Analysis ◽  
High Speed ◽  
Memory Cell ◽  
Parametric Stability ◽  
Static Noise Margin ◽  
Noise Margin ◽  
Sram Cell ◽  
Margin Analysis ◽  
Static Noise ◽  
Technology Advances

As technology advances, the need for SRAM cells that may be utilised in high-speed applications grows. SRAM cells' static noise margin (SNM) is one of the most important variables to consider when designing a memory cell, and it is the main predictor of SRAM cell speed. The static noise margin will have an impact on the read and write margins. When it comes to the SRAM Cell's stability, the SNM is very important. For high-speed SRAMs, read/write margin analysis is critical since it affects how much data can be read and written. The simulation was run using Mentor Graphics' IC Station, which utilised 350nm technology rather than 180nm technology.

Sign in / Sign up

Export Citation Format

Share Document