The Role of Grain Boundary Regions in the Localized Corrosion of a Copper-Free 6111-like Aluminum Alloy

CORROSION ◽  
2005 ◽  
Vol 61 (6) ◽  
pp. 534-547 ◽  
Author(s):  
A. Shi ◽  
B. A. Shaw ◽  
E. Sikora
Keyword(s):  
Aluminum Alloy ◽  
Grain Boundary ◽  
Localized Corrosion

Enhancing the Localized Corrosion Resistance of High Strength 7010 Al-Alloy

2010 ◽  
Vol 138 ◽  
pp. 1-6 ◽  
Author(s):  
M. Bobby Kannan ◽  
V.S. Raja
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Grain Boundary ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Intergranular Corrosion ◽  
High Strength ◽  
Localized Corrosion ◽  
Al Alloy

This paper brings out the developments on heat-treatment and alloying to improve the stress corrosion cracking (SCC) behavior of 7010 Al-alloy. The role of microstructures including the grain boundary precipitates and recystallized grains and the relation of intergranular corrosion (IGC) on the SCC behavior of 7010 Al-alloy have been discussed.

Strain-induced martensite effects on transgranular carbide precipitation in type 304 stainless steels

1991 ◽  
Vol 49 ◽  
pp. 604-605
Author(s):  
A.H. Advani ◽  
L.E. Murr ◽  
D. Matlock
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Stress Corrosion Cracking ◽  
Stainless Steels ◽  
Deformation Twin ◽  
Austenitic Stainless Steels ◽  
Carbide Precipitation ◽  
Strain Induced Martensite ◽  
Type 304

Thermomechanically induced strain is a key variable producing accelerated carbide precipitation, sensitization and stress corrosion cracking in austenitic stainless steels (SS). Recent work has indicated that higher levels of strain (above 20%) also produce transgranular (TG) carbide precipitation and corrosion simultaneous with the grain boundary phenomenon in 316 SS. Transgranular precipitates were noted to form primarily on deformation twin-fault planes and their intersections in 316 SS.Briant has indicated that TG precipitation in 316 SS is significantly different from 304 SS due to the formation of strain-induced martensite on 304 SS, though an understanding of the role of martensite on the process has not been developed. This study is concerned with evaluating the effects of strain and strain-induced martensite on TG carbide precipitation in 304 SS. The study was performed on samples of a 0.051%C-304 SS deformed to 33% followed by heat treatment at 670°C for 1 h.

On the role of tin underlays for the prevention of thermal grooving in thin gold films

1986 ◽  
Vol 44 ◽  
pp. 732-733
Author(s):  
Jin Young Kim ◽  
R. E. Hummel ◽  
R. T. DeHoff
Keyword(s):  
Thin Film ◽  
Free Surface ◽  
Grain Boundary ◽  
Beneficial Effect ◽  
Failure Mechanism ◽  
Failure Mechanisms ◽  
Distinct Advantage ◽  
Gold Films ◽  
Gold Thin Film

Gold thin film metallizations in microelectronic circuits have a distinct advantage over those consisting of aluminum because they are less susceptible to electromigration. When electromigration is no longer the principal failure mechanism, other failure mechanisms caused by d.c. stressing might become important. In gold thin-film metallizations, grain boundary grooving is the principal failure mechanism.Previous studies have shown that grain boundary grooving in gold films can be prevented by an indium underlay between the substrate and gold. The beneficial effect of the In/Au composite film is mainly due to roughening of the surface of the gold films, redistribution of indium on the gold films and formation of In2O3 on the free surface and along the grain boundaries of the gold films during air annealing.

The role of brass texture on the deformation response of 7075-T651 aluminum alloy under equi-biaxial tension

2021 ◽  
pp. 141133
Author(s):  
Nedunchezhian Srinivasan ◽  
R. Velmurugan ◽  
Lalith Kumar Bhaskar ◽  
Satish Kumar Singh ◽  
Bhanu Pant ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Biaxial Tension ◽  
Deformation Response
Sign in / Sign up

Export Citation Format

Share Document