scholarly journals Recent Trend in Biomechanical Energy Harvesting

10.48175/606 ◽  
2020 ◽  
pp. 68-73
Author(s):  
Swapnil Arawade ◽  
Ganesh Korwar
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Recent Trend ◽  
Electrical Power ◽  
Energy Crisis ◽  
Smart Devices ◽  
Energy Harvesters ◽  
The Past ◽  
Innovative Work ◽  
Work Done

In this literature different biomechanical energy harvesters are reviewed. In the past years a lot of work reported on energy harvesting. Energy crisis is the main issue in front of human so it is essential to find new promising ways to fulfil the need of electricity. Wearable smart devices and small sensor require low electrical power so to power them biomechanical energy harvesters comes into picture. The innovative work done by the researchers in developing new biomechanical energy harvester is discussed and summarized.

Design enhancement and non-dimensional analysis of magnetically-levitated nonlinear vibration energy harvesters

2017 ◽  
Vol 28 (19) ◽  
pp. 2810-2822 ◽  
Author(s):  
Abdullah Nammari ◽  
Hamzeh Bardaweel
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Magnetic Levitation ◽  
Energy Harvesters ◽  
The Past ◽  
Magnetic Forces ◽  
Linear Version ◽  
Harvesting Techniques ◽  
Unique Potential ◽  
Nonlinear Energy

Over the past decade, there has been special interest in developing nonlinear energy harvesters capable of operating over a wideband frequency spectrum. Chief among the nonlinear energy harvesting techniques is magnetic levitation–based energy harvesting. Nonetheless, current nonlinear magnetic levitation–based energy harvesting approaches encapsulate design challenges. This work investigates some of the design issues and limitations faced by traditional magnetic levitation–based energy harvesters such as damping schemes and stiffness nonlinearities. Both experiment and model are used to quantify and evaluate damping regimes and stiffness nonlinearities present in magnetic levitation–based energy harvesters. Results show that dry friction, mostly ignored in magnetic levitation–based energy harvesting literature, contributes to the overall energy dissipation. Measured and modeled magnetic forces–displacement curves suggest that stiffness nonlinearities are weak over moderate distances. An enhanced design utilizing a combination of mechanical and magnetic springs is introduced to overcome some of these limitations. A non-dimensional model of the proposed design is developed and used to investigate the enhanced architecture. The unique potential energy profile suggests that the proposed nonlinear energy harvester outperforms the linear version by steepening the displacement response and shifting the resonance frequency, resulting in a larger bandwidth for which power can be harvested.

scholarly journals Energy Harvesting Backpacks for Human Load Carriage: Modelling and Performance Evaluation

Electronics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 1061
Author(s):  
Ledeng Huang ◽  
Ruishi Wang ◽  
Zhenhua Yang ◽  
Longhan Xie
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Electrical Power ◽  
Metabolic Cost ◽  
Energy Performance ◽  
Load Carriage ◽  
Metabolic Power ◽  
Power Sources ◽  
Energy Harvesters ◽  
And Performance

In recent years, there has been an increasing demand for portable power sources as people are required to carry more equipment for occupational, military, or recreational purposes. The energy harvesting backpack that moves relative to the human body, could capture kinetic energy from human walking and convert vertical oscillation into the rotational motion of the generators to generate electricity. In our previous work, a light-weight tube-like energy harvester (TL harvester) and a traditional frequency-tuneable backpack-based energy harvester (FT harvester) were proposed. In this paper, we discuss the power generation performance of the two types of energy harvesters and the energy performance of human loaded walking, while carrying energy harvesting backpacks, based on two different spring-mass-damper models. Testing revealed that the electrical power in the experiments showed similar trends to the simulation results, but the calculated electrical power and the net metabolic power were higher than that of the experiments. Moreover, the total cost of harvesting (TCOH), defined as additional metabolic power in watt required to generate 1 W of electrical power, could be negative, which indicated that there is a chance to generate 6.11 W of electricity without increasing the metabolic cost while carrying energy harvesting backpacks.

Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs

2008 ◽  
Vol 20 (5) ◽  
pp. 529-544 ◽  
Author(s):  
Alper Erturk ◽  
Jamil M. Renno ◽  
Daniel J. Inman
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Electrical Power ◽  
Distributed Parameter ◽  
Voltage Response ◽  
Shaped Beam ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Distributed Parameter Model

Cantilevered piezoelectric energy harvesters have been extensively investigated in the literature of energy harvesting. As an alternative to conventional cantilevered beams, this article presents the L-shaped beam-mass structure as a new piezoelectric energy harvester configuration. This structure can be tuned to have the first two natural frequencies relatively close to each other, resulting in the possibility of a broader band energy harvesting system. This article describes the important features of the L-shaped piezoelectric energy harvester configuration and develops a linear distributed parameter model for predicting the electromechanically coupled voltage response and displacement response of the harvester structure. After deriving the coupled distributed parameter model, a case study is presented to investigate the electrical power generation performance of the L-shaped energy harvester. A direct application of the L-shaped piezoelectric energy harvester configuration is proposed for use as landing gears in unmanned air vehicle applications and a case study is presented where the results of the L-shaped — energy harvester — landing gear are favorably compared against the published experimental results of a curved beam configuration used for the same purpose.

Enhanced frequency synchronization for concurrent aeroelastic and base vibratory energy harvesting using a softening nonlinear galloping energy harvester

2021 ◽  
pp. 1045389X2110263
Author(s):  
Shun Chen ◽  
David Eager ◽  
Liya Zhao
Keyword(s):  
Energy Harvesting ◽  
Electromechanical Coupling ◽  
Energy Harvester ◽  
Poor Performance ◽  
Effective Bandwidth ◽  
Frequency Synchronization ◽  
Periodic Oscillations ◽  
Energy Harvesters ◽  
Paper Form ◽  
Excited Oscillation

This paper proposes a softening nonlinear aeroelastic galloping energy harvester for enhanced energy harvesting from concurrent wind flow and base vibration. Traditional linear aeroelastic energy harvesters have poor performance with quasi-periodic oscillations when the base vibration frequency deviates from the aeroelastic frequency. The softening nonlinearity in the proposed harvester alters the self-excited galloping frequency and simultaneously extends the large-amplitude base-excited oscillation to a wider frequency range, achieving frequency synchronization over a remarkably broadened bandwidth with periodic oscillations for efficient energy conversion from dual sources. A fully coupled aero-electro-mechanical model is built and validated with measurements on a devised prototype. At a wind speed of 5.5 m/s and base acceleration of 0.1 g, the proposed harvester improves the performance by widening the effective bandwidth by 300% compared to the linear counterpart without sacrificing the voltage level. The influences of nonlinearity configuration, excitation magnitude, and electromechanical coupling strength on the mechanical and electrical behavior are examined. The results of this paper form a baseline for future efficiency enhancement of energy harvesting from concurrent wind and base vibration utilizing monostable stiffness nonlinearities.

scholarly journals Nonlinear damping in energy harvesters driven by colored noise

2018 ◽  
Vol 64 (6) ◽  
pp. 642
Author(s):  
Mauricio Bastida Romero ◽  
Sebastian Ramirez Cholula
Keyword(s):  
Colored Noise ◽  
Energy Harvester ◽  
Electrical Power ◽  
Nonlinear Damping ◽  
Correlated Noise ◽  
Random Vibrations ◽  
Energy Harvesters

We study the performance of an electromechanical oscillator as an energy harvester driven byfinite-bandwidth random vibrations under the influence of both a stiffness-type nonlinearity and anonlinear damping that has recently been found to be relevant in the dynamics of submicrometermechanical resonators. The device was numerically simulated and its performance assessed by meansof the net electrical power and the efficiency of the conversion of the supplied power by the noiseinto electrical power for exponentially correlated noise. We tune the parameters to achieve a goodperformance of the device for non-negligible amplitudes of the nonlinearity of the oscillator and thedamping.

On Mathematical Modeling of Piezoelectric Energy Harvesters

2014 ◽  
Vol 953-954 ◽  
pp. 655-658 ◽  
Author(s):  
Guang Qing Shang ◽  
Hong Bing Wang ◽  
Chun Hua Sun
Keyword(s):  
Mathematical Modeling ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Piezoelectric Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Energy Harvesting System ◽  
Piezoelectric Vibration

Energy harvesting system has become one of important areas of ​​research and develops rapidly. How to improve the performance of the piezoelectric vibration energy harvester is a key issue in engineering applications. There are many literature on piezoelectric energy harvesting. The paper places focus on summarizing these literature of mathematical modeling of piezoelectric energy harvesting, ranging from the linear to nonlinear, from early a single mechanical degree to piezoaeroelastic problems.

Resonant Frequency Tuning Strategies for Vibration-Based Energy Harvesters

2017 ◽  
Author(s):  
Lin Dong ◽  
Frank T. Fisher
Keyword(s):  
Energy Harvesting ◽  
Resonant Frequency ◽  
Energy Harvester ◽  
Frequency Tuning ◽  
Electrical Energy ◽  
Mechanical Stretch ◽  
Applied Bias Voltage ◽  
Energy Harvesters ◽  
Frequency Matching ◽  
Low Levels

Vibration-based energy harvesting has been widely investigated to as a means to generate low levels of electrical energy for applications such as wireless sensor networks. However, due to the fact that vibration from the environment is typically random and varies with different magnitudes and frequencies, it is a challenge to implement frequency matching in order to maximize the power output of the energy harvester with a wider frequency bandwidth for applications where there is a time-dependent, varying source frequency. Possible solutions of frequency matching include widening the bandwidth of the energy harvesters themselves in order to implement frequency matching and to perform resonance-based tuning approach, the latter of which shows the most promise to implement a frequency matching design. Here three tuning strategies are discussed. First a two-dimensional resonant frequency tuning technique for the cantilever-geometry energy harvesting device which extended previous 1D tuning approaches was developed. This 2D approach could be used in applications where space constraints impact the available design space of the energy harvester. In addition, two novel resonant frequency tuning approaches (tuning via mechanical stretch and tuning via applied bias voltage, respectively) for electroactive polymer (EAP) membrane-based geometry energy harvesters was proposed, such that the resulting changes in membrane tension were used to tune the device for applications targeting variable ambient frequency environments.

Flexoelectric Energy Harvesting Using Circular Thin Membranes

2020 ◽  
Vol 87 (9) ◽  
Author(s):  
Zhaoqi Li ◽  
Qian Deng ◽  
Shengping Shen
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Energy Conversion Efficiency ◽  
High Energy ◽  
Circular Membrane ◽  
Governing Equations ◽  
Energy Harvesters ◽  
Thin Membranes ◽  
High Energy Conversion Efficiency ◽  
Working Frequency

Abstract In this work, we propose a circular membrane-based flexoelectric energy harvester. Different from previously reported nanobeams based flexoelectric energy harvesters, for the flexoelectric membrane, the polarization direction around its center is opposite in sign to that far away from the center. To avoid the cancelation of the electric output, electrodes coated to upper and lower surfaces of the flexoelectric membrane are respectively divided into two parts according to the sign of bending curvatures. Based on Hamilton’s principle and Ohm’s law, we obtain governing equations for the circular membrane-based flexoelectric energy harvester. A generalized assumed-modes method is employed for solving the system, so that the performance of the flexoelectric energy harvester can be studied in detail. We analyze the effects of the thickness h, radius r0, and their ratio on the energy harvesting performance. Specifically, we show that, by selecting appropriate h and r0, it is possible to design an energy harvester with both high energy conversion efficiency and low working frequency. At last, through numerical simulations, we further study the optimization ratio for which the electrodes should be divided.

Optimizing the Electrical Power in an Energy Harvesting System

2015 ◽  
Vol 25 (12) ◽  
pp. 1550171 ◽  
Author(s):  
Mattia Coccolo ◽  
Grzegorz Litak ◽  
Jesús M. Seoane ◽  
Miguel A. F. Sanjuán
Keyword(s):  
Energy Harvesting ◽  
Kinetic Energy ◽  
High Frequency ◽  
Energy Harvester ◽  
Electrical Power ◽  
Low Frequency ◽  
Electrical Energy ◽  
Resonance Phenomenon ◽  
Vibrational Resonance ◽  
Energy Harvesting System

In this paper, we study the vibrational resonance (VR) phenomenon as a useful mechanism for energy harvesting purposes. A system, driven by a low frequency and a high frequency forcing, can give birth to the vibrational resonance phenomenon, when the two forcing amplitudes resonate and a maximum in amplitude is reached. We apply this idea to a bistable oscillator that can convert environmental kinetic energy into electrical energy, that is, an energy harvester. Normally, the VR phenomenon is studied in terms of the forcing amplitudes or of the frequencies, that are not always easy to adjust and change. Here, we study the VR generated by tuning another parameter that is possible to manipulate when the forcing values depend on the environmental conditions. We have investigated the dependence of the maximum response due to the VR for small and large variations in the forcing amplitudes and frequencies. Besides, we have plotted color coded figures in the space of the two forcing amplitudes, in which it is possible to appreciate different patterns in the electrical power generated by the system. These patterns provide useful information on the forcing amplitudes in order to produce the optimal electrical power.

On Improvement of Operation Bandwidth of Duffing-Like Vibration-Based Harvesters Using a Mechanical Motion Rectifier

2017 ◽  
Author(s):  
Wei-Che Tai ◽  
Mingyi Liu ◽  
Yue Yuan ◽  
Lei Zuo
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Duffing Oscillator ◽  
Nonlinear Stiffness ◽  
Method Of Averaging ◽  
Jump Phenomenon ◽  
Mechanical Motion ◽  
Energy Harvesters ◽  
Vibratory Motion ◽  
Electromagnetic Generator

A novel vibration-based energy harvester which consists of a monostable Duffing oscillator connected to an electromagnetic generator with a mechanical motion rectifier (MMR-Duffing) is studied. The mechanical motion rectifier converts the bi-directional vibratory motion from ambient environments into uni-directional rotation to the generator and causes the harvester to periodically switch between a larger- and small-inertia system, resulting in nonlinearity in inertia. By means of the method of averaging, it is analytically shown that the proposed Duffing-MMR harvester outperforms traditional monostable Duffing oscillator energy harvesters in twofold. First of all, it increases the bandwidth of energy harvesting, given identical nonlinear stiffness. Second of all, it mitigates the jump phenomenon due to nonlinear stiffness and thus exploits more potential bandwidth of energy harvesting without inducing any jump phenomenon. Finally, the analytical analyses are verified via numerical simulations of a prototype of the proposed Duffing-MMR harvester.

Sign in / Sign up

Export Citation Format

Share Document