scholarly journals Determining the Age of Streetside Trees with Diameter at Breast Height-based Multifactorial Model

2008 ◽  
Vol 34 (3) ◽  
pp. 137-143
Author(s):  
Jan Lukaszkiewicz ◽  
Marek Kosmala
Keyword(s):  
Regression Coefficient ◽  
Tree Height ◽  
Tree Age ◽  
Multifactorial Model ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
R Value ◽  
The Difference ◽  
Individual Trees ◽  
Total Tree

This article evaluates the possibility of determining tree age based simultaneously on diameter at breast height (dbh) (1.3 m [4.3 ft]) and total tree height using common lime, common ash, and horsechestnut species. The first step was the identification and measuring groups of trees growing in similar conditions (streetside trees in Warsaw area, Poland) in which planting ages were known (mainly from archives). Next, multifactorial regression model was developed describing the growth of both tree parameters (dbh and height) over time. In the majority of cases, plotting tree age against diameter and height yielded a regression coefficient r value and determination coefficient r 2value above 0.9. For graphic interpretation of elaborated multifactorial models, nomograms were applied. This kind of graph allows explaining tree age based on both dbh and height of trees. Another step was verification. The resulting model was applied to unrelated groups of trees of known age. Mean bias values were established for each model. The difference between the actual age and mean age calculated with the model was less than ±15%. Presented model, although not meant for application to individual trees, might be useful to determine the age of groups of trees growing along streets and roads.

Mechanistically based, allometric models to predict tree diameter and height in even-aged monoculture of Eucalyptusregnans F. Muell.

1989 ◽  
Vol 19 (2) ◽  
pp. 270-273 ◽  
Author(s):  
P. W. West ◽  
C. L. Beadle ◽  
C. R. A. Turnbull
Keyword(s):  
Tree Height ◽  
Allometric Relationships ◽  
Allometric Models ◽  
Tree Diameter ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Vertical Stability ◽  
Structural Argument ◽  
Individual Trees ◽  
Geometrical Argument

A randomly selected sample of 22 trees was felled in a stand in a 20-year-old monoculture of Eucalyptusregnans F. Muell. in southern Tasmania. One-half of the trees were from a section of the stand that had been heavily thinned 10 years previously, and the remainder were from the unthinned section. The trees were sectioned and the fresh weights of their stems (including bark) and crowns (leaves plus branches) determined. By combining a geometrical argument about the shape of tree stems with a structural argument about their vertical stability, allometric relationships were established relating tree diameter at breast height or tree height to total aboveground weight and the ratio of crown to stem weight. These relationships were found to hold in both the thinned and unthinned sections of the experiment. When combined with a model to predict biomass of individual trees, these models can be used to predict diameter or height of individual trees in E. regnans monoculture.

scholarly journals Taper and Volume Models for Some Terminalia Tree Species

2021 ◽  
pp. 106-125
Keyword(s):  
Tree Species ◽  
Goodness Of Fit ◽  
Tree Height ◽  
Coefficient Of Determination ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Regression Parameters ◽  
Absolute Residual ◽  
Total Tree ◽  
Volume Models

The paper evaluated the performance of the current functional tree taper and volume models. The models were applied to some selected economically important natural Terminalia tree species common to central Sudan, namely, Terminalia laxiflora and, Terminalia brownii. 22 two-variable models (Diameter at breast height and total tree height or bole height) and 10 three-variables models (Diameter at ground level, Diameter at breast height and total tree height or bole height) were evaluated. The tree variables measured were the diameter at breast height (DBH, cm), diameter at the base of the tree (d0, cm), upper stem diameters (di), total tree height (H), and height to the base of the crown (Hb). Data were extracted from a natural reserved forest in the Blue Nile state. The models goodness of fit were evaluated in terms of adjusted coefficient of determination (Ra2), standard error (SE), mean absolute residual (MAR), bias (BI) Akaike’s information criterion (AIC), homogeneity of the residuals and significance of the regression parameters. Taper-17 and Taper-19 were found to be among the best two models for the two species with R2 range of 0.94 – 0.93, but with different rankings for each species. Comparison of the range of data for the tow studied species suggested that representation of various diameter at breast height (DBH, cm), diameter at the base of the tree (d0, cm), upper stem diameters (di), total tree height (H), and height to the base of the crown (Hb), had significant influence on the accuracy of prediction outside the range of the fitted data. This implies that application of the selected models is only useful at local stand level or at best in similar biological and stand structure conditions. For volume models, The results indicated that individual equations act differently in each species as there were great variations in the values of the same parameter of a given model accross the species. Some regression parameters of a given model were found to be significant in some species and insignificant in others. Comparison between the two versions of each group reveals that the replacement of the total tree height by the bole height (merchantable height) improves both the level of parameter significance and the coefficient of determination. From the first, the regression parameters of only 5 models (VOL-1, VOL-5, VOL-8, VOL-17, and VOL-20) were found to be significant at 0.05 probability level for all the tow species. The results also reveal that inclusion of variable D0 to the original two variables (DBH, Ht) to the volume equations results in insignificant improvement of the Ra2 values, while the replacement of the original model Ht variable with the Hb results in quite significant improvement of the Ra2 values. However, substantial improvement of the Ra2 values were obtained when both D0 and Hb were added. For this group of models, VOL-23, VOL-25- VOL-29 VOL30- and VOL-31were found to be the best for almost all the tow species. In general, the study concluded that taper and volume models can provide precise and accurate tree growth variables for the studied species with reasonable cost and time, but care should be taken when dealing with same model for the same species across the varying growth and management condition.

scholarly journals DIAMETRIC SITE INDEX: AN ALTERNATIVE METHOD TO ESTIMATE SITE QUALITY IN Nothofagus obliqua AND N. alpina FORESTS

CERNE ◽  
2016 ◽  
Vol 22 (3) ◽  
pp. 345-354 ◽  
Author(s):  
Hernan Attis Beltran ◽  
Luis Chauchard ◽  
Abel Velásquez ◽  
Renato Sbrancia ◽  
Guillermo Martínez Pastur
Keyword(s):  
Tree Height ◽  
Site Index ◽  
Growth And Yield ◽  
Site Quality ◽  
Tree Age ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Nothofagus Obliqua ◽  
The Mean ◽  
Site Classes

ABSTRAT The first step for constructing models of tree growth and yield is site quality assessment. To estimate this attribute, several methodologies are available in which site index (SI) is a standard one. However, this approach, that uses height at a reference age of trees, can be simplified if age is replaced by another reference variable easier to measure. In this case, the diametric site index (DSI) represents the mean height of dominant trees at a reference mean diameter at breast height. The aim of this work was to develop DSI in pure and mixed Nothofagus alpina and N. obliqua forests, and compare these models with the classical proposals based on height-age variables, within the temperate forest of northwestern Patagonia from Argentina, South America. Data originated from temporary plots and stem analyses were used. Tree age and diameter at breast height were obtained from each plot and used for establishing DSI family functions, following the guide-curve methodology. Site classes were proportionally represented among DSI curves of 17.0, 21.5, 26.0, 30.5 and 35.0 m of dominant tree height. Reference diameter instead of reference age can be cautiously used in order to fit site index models.

scholarly journals Evaluation of Compatible Taper and Volume Models for Combretum hartmannianum and Lonchocarpus laxiflorus Tree Species.

2021 ◽  
pp. 50-70
Keyword(s):  
Tree Species ◽  
Tree Height ◽  
Coefficient Of Determination ◽  
Accurate Estimation ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Regression Parameters ◽  
Absolute Residual ◽  
Total Tree ◽  
Volume Models

This paper developed and evaluated the performance of the current functional tree taper and volume models. The models were applied to some selected economically important natural tree species common to central Sudan, namely, Combretum hartmannianum and, Lonchocarpus Laxiflorus. The tree variables measured were the diameter at breast height (DBH, cm), diameter at the base of the tree (d0, cm), upper stem diameters (di), total tree height (H), and height to the base of the crown (Hb). In total, 19 taper and 32 volume models were tested and evaluated (22 models were two-variable models (Diameter at breast height and total tree height or bole height) and 10 were three-variable models (Diameter at ground level, Diameter at breast height and total tree height or bole height). The model goodness of fit was evaluated in terms of adjusted coefficient of determination (Ra2), standard error (SE), mean absolute residual (MAR), bias (BI) Akaike’s information criterion (AIC), homogeneity of the residuals and significance of the regression parameters. As far as taper models is concerned, Models, some of the models were found to yield satisfactory results for the tow selected species with R2 range of 0.94 – 0.96. For the within species variation of models on the basis of the AIC values, the ranking of the models (smaller AIC first) were in consistant with the rankings due to SE and Ra2 values although AIC penalizes models in proportion to the number regression parameters. In general the results of the study indicated that higher residuals valuse are in most of the cases associated with the lower parts of the bole, the butress portion of the stem. This suggests that care should be taken during the application of such models for hardwood species, especially in open woodlands where butress is a common characteristic.The results for volume models revealed differences in the behaviour of different models for each species as the degree of significance of the regression parameters varies between tree species. However, the replacement of the total tree height by the bole height (merchantable height) improves both the level of parameter significance and the coefficient of determination. The results also reveal that inclusion of diameter at grown level to the original two variables (DBH, Ht) and the replacement of the original model total height with the bale height results in quite significant improvement of the Ra2 values. In general, the study concluded that taper and volume models can provide precise and accurate estimation of tree growth variables for the studied species with reasonable cost and time, but care should be taken when dealing with same model for the same species across varying growth and management condition, or when dealing with different species. country.

scholarly journals Estimation of Genetic Parameters and Wood Yield Selection Index in a Clonal Trial of Korean Pine (Pinus koraiensis) in Northeastern China

2021 ◽  
Vol 13 (8) ◽  
pp. 4167
Author(s):  
David Kombi Kaviriri ◽  
Huan-Zhen Liu ◽  
Xi-Yang Zhao
Keyword(s):  
Selection Index ◽  
Tree Height ◽  
Stem Volume ◽  
Korean Pine ◽  
Branch Number ◽  
Basal Diameter ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Straightness ◽  
Clonal Trial

In order to determine suitable traits for selecting high-wood-yield Korean pine materials, eleven morphological characteristics (tree height, basal diameter, diameter at breast height, diameter at 3 meter height, stem straightness degree, crown breadth, crown height, branch angle, branch number per node, bark thickness, and stem volume) were investigated in a 38-year-old Korean pine clonal trial at Naozhi orchard. A statistical approach combining variance and regression analysis was used to extract appropriate traits for selecting elite clones. Results of variance analysis showed significant difference in variance sources in most of the traits, except for the stem straightness degree, which had a p-value of 0.94. Moderate to high coefficients of variation and clonal repeatability ranged from 10.73% to 35.45% and from 0.06% to 0.78%, respectively. Strong significant correlations on the phenotypic and genotypic levels were observed between the straightness traits and tree volume, but crown breadth was weakly correlated to the volume. Four principal components retaining up to 80% of the total variation were extracted, and stem volume, basal diameter, diameter at breast height, diameter at 3 meter height, tree height, and crown height displayed high correlation to these components (r ranged from 0.76 to 0.98). Based on the Type III sum of squares, tree height, diameter at breast height, and branch number showed significant information to explain the clonal variability based on stem volume. Using the extracted characteristics as the selection index, six clones (PK105, PK59, PK104, PK36, PK28, and K101) displayed the highest Qi values, with a selection rate of 5% corresponding to the genetic gain of 42.96% in stem volume. This study provides beneficial information for the selection of multiple traits for genetically improved genotypes of Korean pine.

scholarly journals Seemingly Unrelated Mixed-Effects Biomass Models for Black Locust in West Poland

Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 380
Author(s):  
Karol Bronisz ◽  
Szymon Bijak ◽  
Rafał Wojtan ◽  
Robert Tomusiak ◽  
Agnieszka Bronisz ◽  
...  
Keyword(s):  
Black Locust ◽  
Random Effect ◽  
Tree Height ◽  
Cross Model ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Dependent Variables ◽  
Dry Biomass ◽  
Biomass Components ◽  
Independent Variable

Information about tree biomass is important not only in the assessment of wood resources but also in the process of preparing forest management plans, as well as for estimating carbon stocks and their flow in forest ecosystems. The study aimed to develop empirical models for determining the dry mass of the aboveground parts of black locust trees and their components (stem, branches, and leaves). The research was carried out based on data collected in 13 stands (a total of 38 sample trees) of black locust located in western Poland. The model system was developed based on multivariate mixed-effect models using two approaches. In the first approach, biomass components and tree height were defined as dependent variables, while diameter at breast height was used as an independent variable. In the second approach, biomass components and diameter at breast height were dependent variables and tree height was defined as the independent variable. Both approaches enable the fixed-effect and cross-model random-effect prediction of aboveground dry biomass components of black locust. Cross-model random-effect prediction was obtained using additional measurements of two extreme trees, defined as trees characterized by the smallest and largest diameter at breast height in sample plot. This type of prediction is more precise (root mean square error for stem dry biomass for both approaches equals 77.603 and 188.139, respectively) than that of fixed-effects prediction (root mean square error for stem dry biomass for both approaches equals 238.716 and 206.933, respectively). The use of height as an independent variable increases the possibility of the practical application of the proposed solutions using remote data sources.

scholarly journals Field Evaluation of Populus deltoides Bartr. ex Marsh. at Two Sites in Indo-gangetic Plains of India

2010 ◽  
Vol 59 (1-6) ◽  
pp. 1-7 ◽  
Author(s):  
G. P. S. Dhillon ◽  
Avtar Singh ◽  
Pritpal Singh ◽  
D. S. Sidhu
Keyword(s):  
Populus Deltoides ◽  
Growth Traits ◽  
Tree Height ◽  
Field Evaluation ◽  
Site Conditions ◽  
Genetic Advance ◽  
Gangetic Plains ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Northwestern India

Abstract Results from clonal trials of Populus deltoides conducted in two distinct agroclimatic regions of Punjab in northwestern India are reported and discussed. Sixteen clones were evaluated at Hambran and Bathinda where commonly grown clone ‘G-48’ was considered as control. Significant differences among clones (P < 0.001) were observed for diameter at breast height (DBH), tree height and volume at the age of four and six years under both the site conditions. Clone ‘L-48’ ranked first for volume at six year age at both sites and was followed by clone ‘Ranikhet’. The respective superiority for volume of these clones over control was 44.8 and 23.2 per cent at Hambran and 72.5 and 30.7 per cent at Bathinda. All growth traits registered significantly higher values at Hambran in comparison to those at Bathinda. Clone x site interaction was also significant (P < 0.001). The clones ‘L-168’, ‘154/86’, ‘Solan-z’ and ‘170/88’ experienced huge fluctuation in ranking between sites for volume at 6-year age. The DBH and height showed significant and positive correlation with each other and with tree volume at all the age combinations. The clonal mean heritability was quite high both at Hambran (0.73-0.86) and Bathinda (0.80-0.95). The genetic advance were the highest for volume (33.34-64.26%) and the lowest (10.65-22.79%) in case of height.

scholarly journals Evaluation of the Relative Stem Taper Curves Estimated Only from Tree Height and Diameter at Breast Height:

2012 ◽  
Vol 94 (4) ◽  
pp. 188-191 ◽  
Author(s):  
Megumi Ishida ◽  
Satoshi Naoi ◽  
Yasumasa Watanabe ◽  
Akinori Tsuzuku ◽  
Masaya Aoki
Keyword(s):  
Tree Height ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Taper

scholarly journals Tree crown size as a measure of tree biosocial position in 135-year-old oak (Quercus L.) stand

2016 ◽  
Vol 58 (1) ◽  
pp. 31-42 ◽  
Author(s):  
Katarzyna Kaźmierczak ◽  
Bogna Zawieja
Keyword(s):  
Principal Component ◽  
Tree Height ◽  
Projection Area ◽  
Tree Crown ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Crown Length ◽  
Pca Method ◽  
Crown Projection Area

AbstractThe paper presents an attempt to apply measurable traits of a tree – crown projection area, crown length, diameter at breast height and tree height for classification of 135-year-old oak (QuercusL.) trees into Kraft classes. Statistical multivariate analysis was applied to reach the aim. Empirical material was collected on sample plot area of 0.75 ha, located in 135-year-old oak stand. Analysis of dimensional traits of oaks from 135-year-old stand allows quite certain classification of trees into three groups: pre-dominant, dominant and co-dominant and dominated ones. This seems to be quite promising, providing a tool for the approximation of the biosocial position of tree with no need for assessment in forest. Applied analyses do not allow distinguishing trees belonging to II and III Kraft classes. Unless the eye-estimation-based classification is completed, principal component analysis (PCA) method provided simple, provisional solution for grouping trees from 135-year-old stand into three over-mentioned groups. Discriminant analysis gives more precise results compared with PCA. In the analysed stand, the most important traits for the evaluation of biosocial position were diameter at breast height, crown projection area and height.

Sign in / Sign up

Export Citation Format

Share Document