scholarly journals Characteristics of chosen biometric features of European ash (Fraxinus excelsior L.) due to the age of trees and the forest site type

2020 ◽  
Vol 26 (1) ◽  
Author(s):  
Krzysztof Turczański ◽  
Katarzyna Kaźmierczak ◽  
Bogna Zawieja

The dieback of European ash contributes the disappearance of the species from the typical ash sites such as floodplain forests or alder-ash forests. The species occurs more often in moist broadleaved forests and fresh broadleaved forests. Therefore, the main objective of our study was to determine the influence of ash age and the forest site type on the chosen biometric features of dominant and codominant trees. We also aimed to compare the sizes of European ash growing in optimal forest site types with less fertile ones, where it does not occur as the main species. We collected the empirical material from 25 plots representing 4 forest site types: fresh broadleaved forest, moist broadleaved forest, floodplain forest, and alder-ash forest. The research plots were located in the Babki, Konstantynowo, and Łopuchówko Forest Districts, western Poland. The age of ash varied from 52 to 144 years. On each plot, we measured a tree height and a diameter at breast height of 15 dominant and codominant ash trees. Subsequently, we used measured features to calculate the volume of each tree. We carried out the analysis of covariance of diameter at breast height, height, and volume. The analysis showed the strong relationship of examined features with the age of the species and the forest site type. Furthermore, our results indicated the underestimation of the growth possibilities of European ash in fresh broadleaved forest and moist broadleaved forest. In these sites, ash achieved similar sizes in comparison to optimal forest site types, i.e. floodplain forest and alder-ash forest. This result cannot be omitted in forestry practice, especially in silviculture, which should aim to support the natural regeneration of European ash in differentiated site conditions. Keywords: European ash, forest site type, age of a tree, biometric features

2013 ◽  
Vol 42 (2) ◽  
pp. 219-233 ◽  
Author(s):  
Adam Kaliszewski ◽  
Paweł Lech ◽  
Tomasz Oszako

An investigation carried out in the Western Carpathian Mountains (Ujsoły, Węgierska Górka, Ustroń and Wisła Forest Districts) demonstrated a strong relationship between dieback in Norway spruce stands and the intensity of occurrence of <em>Armillaria ostoyae</em>. For the most endangered site types – mountain deciduous forest (LG) and mountain mixed forest (LMG), analyses of losses of annual volume increment and of stand productivity were performed, and their financial dimensions determined. The greatest losses – of about 8 m<sup>3</sup>/ha/year for tree stands of the age of 100 years, and 400 m<sup>3</sup>/ha for the rotation period – were found for LG (Mountain broadleaved forest) site type.


2009 ◽  
Vol 55 (No. 2) ◽  
pp. 96-100 ◽  
Author(s):  
K. Behjou F ◽  
B. Majnounian ◽  
J. Dvořák ◽  
M. Namiranian ◽  
A. Saeed ◽  
...  

A field production study was conducted for a manual harvesting system using a chainsaw in a Caspian hardwood forest site. A selective cut was performed on a 42-hectare tract with an average slope of 30 percent. Felling time per tree was most affected by diameter at breast height and by the distance among harvested trees. The gross and net production rate was 20.6 m<sup>3</sup> and 26.1 m<sup>3</sup> per hour/one person, respectively. The unit cost considering the gross and net production rate was 1.05 USD/m<sup>3</sup> and 0.81 USD/m<sup>3</sup>, respectively. The significant variables included diameter at breast height (<I>D</I>) and distance among harvested trees (<I>L</I>) for the time expenditure model. This regression function is statistically significant at &alpha; = 0.01.


1981 ◽  
Vol 11 (1) ◽  
pp. 1-8 ◽  
Author(s):  
S. Eis

The rate of invasion and height growth of vegetation in logged-over areas were studied on four forest site types in the white spruce – alpine fir (Piceaglauca (Moench) Voss – Abieslasiocarpa (Hook.) Nutt.) forests north of Prince George, B.C. On Cornus–Moss, Aralia–Dryopteris, and Devil's Club site types, which generally had full stocking, vegetation that grew under the canopy of trees was replaced after logging by aggressive pioneer species. Annuals were the first to invade the logged-over area, followed by biennials and perennials. The invasion of shrubs was the slowest. After logging, 6 or 7 years elapsed before vegetation became a serious hindrance to regeneration and, by that time, white spruce seedlings planted immediately after logging were tall enough to withstand competition. On the Alluvium site type, where stocking is usually open and shrubs and grasses that thrive in the logged-over areas are present, spruce seedlings were overtopped during the first growing season and eliminated as the density of shrubs increased.


2019 ◽  
Vol 70 (1) ◽  
pp. 1-16
Author(s):  
Jaanus Paal ◽  
Iti Jürjendal

Abstract Fern-rich forest communities are presented in Estonia in mesic or moderately humid nutrient-rich habitats, in areas of drained mire forests, on floodplains and lower parts of talus slopes of the North-Estonian limestone escarpment (klint). In the recent official forest typology only one site type has been distinguished and labelled by the ferns: the Dryopteris site type in the scope of boreo-nemoral forests. The aims of the current study were (i) to clarify whether distinguishing between two fern-rich forest site types, one among the full-drained forests group and another in the boreo-nemoral forests group, is reasonable, and if so, then (ii) what the main characteristics of both considered forest site types are, (iii) what the main environmental factors determining the structure of these communities are, and (iv) what the mutual relationship between those forests and other fern-rich forest communities is. Our results asserted a distinct difference between the full-drained and undrained Dryopteris site type forests distinguished by the former scholars. The undrained boreo-nemoral fern-rich stands have developed in the same place in harmony with habitat conditions, while drained forests have significantly changed. It seems that despite some vagueness due to long-lasting post-drainage succession, it is nevertheless justified to recognise the fern-rich drained stands in Estonian forest typology as representing an autonomous forest site type in the group of full-drained forests. To avoid confusion in nomenclature, in the future, the undrained fern-rich boreo-nemoral forests site type could be named according to the most conspicuous indicator species as the Athyrium (filix-femina) site type and fern-rich stands on full-drained peat soils as the Dryopteris (expansa) site type.


Forests ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1502
Author(s):  
Cezary Beker ◽  
Mieczysław Turski ◽  
Katarzyna Kaźmierczak ◽  
Tomasz Najgrakowski ◽  
Roman Jaszczak ◽  
...  

Studies were carried for 200 trees coming from eight pure pine stands aged 25–95 years, growing in a fresh mixed coniferous forest habitat, in the Murowana Goślina Forest Experimental Station (52°34′ N, 17°00′ E) in western Poland. The aim of the study was to determine the size of the assimilatory apparatus of single pines (Pinus sylvestris L.): weight of leaved twigs (ugc), needle weight (ic), the volume of leaved twigs (ugo) and needle volume (io) and its relationship with selected dendrometric and increment traits of trees. The basic dendrometric traits were determined (height—h and diameter at breast height—d1.3) together with selected increments (heights—Ih5 and Ih10, diameter at breast height—Id5 and Id10, basal area at breast height—Ig5 and Ig10, volume—Iv5 and Iv10). A statistically significant linear correlation and a multiple linear correlation were shown between analysed traits, which confirms a strong relationship of the size of the assimilatory apparatus with tree increment. In this context, the strong correlation with the increment in basal area at breast height (correlation coefficient 0.8731 ÷ 0.9836) and with the increment in diameter at breast height (correlation coefficient 0.7835 ÷ 0.9581), after determining the increment in diameter at breast height requires only simple mathematical transformations to determine the increment in basal area at breast height. For the above-mentioned reasons, the increment in basal area at breast height is predisposed to be commonly used in the determination of the efficiency of the assimilatory apparatus of trees.


2014 ◽  
Vol 75 (1) ◽  
pp. 77-87 ◽  
Author(s):  
Ewa Stefańska-Krzaczek ◽  
Paweł Pech

Abstract The utility of phytocenotic indices in the diagnosis and classification of forest sites might be limited because of vegetation degeneration in managed forests. However, even in secondary communities it may be possible to determine indicator species, although these may differ from typical and well known plant indicators. The aim of this work was to assess the vegetation diversity of Scots pine stands in representative forest site types along a moisture and fertility gradient. In total 120 sample plots from Turawa forests were included in the study. These plots represented young (21-40 years) and old (> 80 years) Scots-pine-dominated stands. The forest sites were categorised according to Polish site classification. Four site categories were studied: Bśw (very nutrient-poor and mesic sites), BMśw (nutrient-poor and mesic sites), BMw (nutrient-poor and moist sites), LMw (quite nutrient-rich and moist sites). The species composition of the forest patches studied hardly differed among forest site types. Almost all of the vegetation in site Bśw was different from both moist site types (BMw and LMw). Sites Bśw and LMw had the exclusive species determined as site indicators. Moreover, young stands had their own site type indicator species which differed from old stands. Numerical classification showed that only two plant communities were widespread: Leucobryo- Pinetum in Bśw and BMśw, and the community of Pinus sylvestris and Molinia caerulea in BMśw, BMw, LMw. In secondary communities typical indicator species may not be useful, but it is possible to determinate species that are locally unique to forest site type. Despite the convergence in the composition of the plant community resulting from tree stand unification, plant communities have the capacity for a more diverse composition. Tree stand conversion can increase phytocenotic diversity


AGROFOR ◽  
2016 ◽  
Vol 1 (3) ◽  
Author(s):  
Aigars INDRIKSONS ◽  
Edgars DUBROVSKIS ◽  
Lelde HERMANE ◽  
Andis KALNINS

Most of the ground cover vegetation descriptions given for characteristic of certainforest site types are made for mature forest stands. However the site typeestimation for the practical forest inventory needs knowledge about the vegetationin every age class of forest. The clearcut as an artificial forest disturbance causesdramatically changes in plant community. Especially fast changes proceed duringthe first years after the clearcut. Due to increase of temperature and nutrientavailability there proceeds several processes causing significant changes in groundcover vegetation. In 2015 a research was started to clarify the changes in groundcover vegetation in Hylocomiosa forest site type. This forest site type is mostabundant in Latvian forests taking around 22%. The dominant tree species inHylocomiosa is Scots pine (Pinus sylvestris L.) although the silver birch (Betulapendula Roth), Norway spruce (Picea abies (L.) Karsten) and aspen (Populustremula L.) can form a tree stand there. The chronosequence method was used byproviding the inventory at 5 tree stands dominated by pine. Six sample plots ateach forest stand with size of 10 m2 were established. The point-square method byusing of 1mm thick and 1m high metallic needle was used for registration of plantsat each square of sample plot. The inventory showed significant changes of speciescomposition and projective cover of moss species and caulescent plants. Theresults of calculation of the Ellenberg’s ecological values and Tschekanovskycoefficient suggest of appearance of plants with another attitude to the ecologicalfactors.


2021 ◽  
Vol 13 (8) ◽  
pp. 4167
Author(s):  
David Kombi Kaviriri ◽  
Huan-Zhen Liu ◽  
Xi-Yang Zhao

In order to determine suitable traits for selecting high-wood-yield Korean pine materials, eleven morphological characteristics (tree height, basal diameter, diameter at breast height, diameter at 3 meter height, stem straightness degree, crown breadth, crown height, branch angle, branch number per node, bark thickness, and stem volume) were investigated in a 38-year-old Korean pine clonal trial at Naozhi orchard. A statistical approach combining variance and regression analysis was used to extract appropriate traits for selecting elite clones. Results of variance analysis showed significant difference in variance sources in most of the traits, except for the stem straightness degree, which had a p-value of 0.94. Moderate to high coefficients of variation and clonal repeatability ranged from 10.73% to 35.45% and from 0.06% to 0.78%, respectively. Strong significant correlations on the phenotypic and genotypic levels were observed between the straightness traits and tree volume, but crown breadth was weakly correlated to the volume. Four principal components retaining up to 80% of the total variation were extracted, and stem volume, basal diameter, diameter at breast height, diameter at 3 meter height, tree height, and crown height displayed high correlation to these components (r ranged from 0.76 to 0.98). Based on the Type III sum of squares, tree height, diameter at breast height, and branch number showed significant information to explain the clonal variability based on stem volume. Using the extracted characteristics as the selection index, six clones (PK105, PK59, PK104, PK36, PK28, and K101) displayed the highest Qi values, with a selection rate of 5% corresponding to the genetic gain of 42.96% in stem volume. This study provides beneficial information for the selection of multiple traits for genetically improved genotypes of Korean pine.


2009 ◽  
Vol 89 (1) ◽  
pp. 67-79 ◽  
Author(s):  
Dave M Morris

The current study was conducted to quantify and compare dissolved organic carbon (DOC) and dissolved organic nitrogen (DON) fluxes through black-spruce-dominated forests, to compare the source/sink characteristics of sphagnum- versus feathermoss-dominated forest floors, and to identify changes in DOC and DON flow patterns occurring as a result of clearcut harvesting. After 2 yr of pre-harvest monitoring, replicated, experimental harvests of varying intensities of biomass removals were conducted followed by 4 yr of post-harvest sampling. Prior to harvest, the upland site type, dominated by feathermoss, was a significant source of DOC and DON, whereas, the wet-sphagnum-dominated sites exported minor amounts of these solutes. After harvest, DOC and DON fluxes peaked in the second year, but then dropped off significantly to at or below pre-harvest levels. On the upland site type, chipper debris appeared to be a major source of DOC and DON generating fluxes well above the pre-harvest levels. On the wetter site types, it appeared that microclimate differences between harvest treatments had a stronger influence on DOC and DON production than did the amount or type of harvest residue. Full-tree harvesting did not significantly alter the production of DOC and DON when compared with stem-only harvesting on the sites included in this study. Key words: DOC, DON, forest floor leachate, black spruce, harvesting response


Sign in / Sign up

Export Citation Format

Share Document