scholarly journals Modified staining protocol with Safranin O and Astra Blue for the plant histology

2021 ◽  
Vol 89-90 ◽  
pp. 110-113
Author(s):  
Andriy Novikov ◽  
Mariia Sup-Novikova
Keyword(s):  
Web Sites ◽  
Water Solution ◽  
Ethanol Solution ◽  
Water Soluble ◽  
Differential Staining ◽  
Chemical Structures ◽  
Long Time ◽  
Staining Protocol ◽  
The Difference ◽  
Safranin O

Many staining protocols are widely applied in botanical microtechniques and serve specific histological purposes. In particular, some dyes are used simultaneously to receive contrasting colorations of different chemical structures, e.g., lignin and cellulose. One of the most popular differential staining protocols is based on the Safranin O / Astra Blue dyes combination. Safranin O is a water-soluble basic dye that stains lignin in red. Astra Blue is also a water-soluble dye but having an acidic reaction, which stains cellulose in blue. Usually, a 1–2 % solution of Safranin O in distilled water or 50–70 % ethanol is applied in combination with the 0.5–1 % water solution of Astra Blue to detect lignified structures and obtain contrasting pictures convenient for the light microscopy. For a long time, Astra Blue was used exclusively with water solutions, and such recommendation without additional options is indicated on producers’ web sites. However, in 2002 it was proposed to use 1 % Astra Blue solution in 95 % ethanol to identify the lignified tissues. Later, such an ethanol solution of Astra Blue was also successfully applied by other researchers for different experimental purposes.We tested the modified staining protocol with the application of both 1 % Safranin O and Astra Blue solutions in a slightly lower concentration of ethanol (70 %) on the flower buds of Gagea lutea (Liliaceae) and found it working well. We believe that such a modified protocol with the solutions of these two dyes in 70 % ethanol allows simplifying the procedure of the plant material staining due to application of the same concentrations of dissolvent and reducing the difference in solvent concentration between two following contrasting staining solutions. Such differential staining can be effectively applied for plant histology purposes, especially where there is a need to distinguish lignified structures and secretory tissues.

Inter-country inequality as a dynamic process and the problem of post-industrial development

2018 ◽  
pp. 5-29 ◽  
Author(s):  
L. M. Grigoryev ◽  
V. A. Pavlyushina
Keyword(s):  
Economic Growth ◽  
Political Institutions ◽  
Industrial Development ◽  
Modern World ◽  
New Approach ◽  
Development Level ◽  
The World ◽  
Long Time ◽  
The Difference ◽  
Post Industrial

The phenomenon of economic growth is studied by economists and statisticians in various aspects for a long time. Economic theory is devoted to assessing factors of growth in the tradition of R. Solow, R. Barrow, W. Easterly and others. During the last quarter of the century, however, the institutionalists, namely D. North, D. Wallis, B. Weingast as well as D. Acemoglu and J. Robinson, have shown the complexity of the problem of development on the part of socioeconomic and political institutions. As a result, solving the problem of how economic growth affects inequality between countries has proved extremely difficult. The modern world is very diverse in terms of development level, and the article offers a new approach to the formation of the idea of stylized facts using cluster analysis. The existing statistics allows to estimate on a unified basis the level of GDP production by 174 countries of the world for 1992—2016. The article presents a structured picture of the world: the distribution of countries in seven clusters, different in levels of development. During the period under review, there was a strong per capita GDP growth in PPP in the middle of the distribution, poverty in various countries declined markedly. At the same time, in 1992—2016, the difference increased not only between rich and poor groups of countries, but also between clusters.

ANALISA KANDUNGAN BETA-GLUKAN LARUT AIR DAN LARUT ALKALI DARI TUBUH BUAH JAMUR TIRAM (Pleurotus ostreatus) DAN SHIITAKE (Lentinus edodes)

2013 ◽  
Vol 13 (3) ◽  
Author(s):  
Netty Widyastuti ◽  
Teguh Baruji ◽  
Henky Isnawan ◽  
Priyo Wahyudi ◽  
Donowati Donowati
Keyword(s):  
Molecular Structure ◽  
Molecular Weight ◽  
Immune System ◽  
Pleurotus Ostreatus ◽  
Water Soluble ◽  
Low Molecular Weight ◽  
Lentinus Edodes ◽  
Beta Glucan ◽  
Oyster Mushrooms ◽  
The Difference

Beta glucan is a polysaccharide compound, generally not soluble inwater and resistant to acid. Beta glucan is used as an immunomodulator (enhancing the immune system) in mammals is usually a beta-glucan soluble in water, easily absorbed and has a low molecular weight. Several example of beta-glucan such as cellulose (β-1 ,4-glucan), lentinan (β-1 0.6-glucan) and (β-1 ,3-glucan), pleuran (β-1, 6 and β-1 ,3-glucan) are isolated from species of fungi Basidiomycota include mushrooms (Pleurotus ostreatus) and shiitake (Lentinus edodes).The purpose of thisresearch activity is to obtain beta-glucan compound that can be dissolved in water and in alkali derived from fungi Basidiomycota, i.e, Oyster mushrooms (Pleurotus ostreatus) and shiitake (Lentinus edodes). The result of beta-glucan compared to characterize the resulting beta glucan that is molecular structure . The difference of beta glucan extraction is based on the differences in solubility of beta-glucan. Beta glucan could be water soluble and insoluble water.

Psychology: Volume 5

2019 ◽  
Keyword(s):  
World View ◽  
Science Volume ◽  
Western World ◽  
Mental Life ◽  
Long Time ◽  
The Difference ◽  
New Perspective ◽  
Indian Setting ◽  
The Mind ◽  
The Relationship

This survey of research on psychology in five volumes is a part of a series undertaken by the ICSSR since 1969, which covers various disciplines under social science. Volume Five of this survey, Explorations into Psyche and Psychology: Some Emerging Perspectives, examines the future of psychology in India. For a very long time, intellectual investments in understanding mental life have led to varied formulations about mind and its functions across the word. However, a critical reflection of the state of the disciplinary affairs indicates the dominance of Euro-American theories and methods, which offer an understanding coloured by a Western world view, which fails to do justice with many non-Western cultural settings. The chapters in this volume expand the scope of psychology to encompass indigenous knowledge available in the Indian tradition and invite engaging with emancipatory concerns as well as broadening the disciplinary base. The contributors situate the difference between the Eastern and Western conceptions of the mind in the practice of psychology. They look at this discipline as shaped by and shaping between systems like yoga. They also analyse animal behaviour through the lens of psychology and bring out insights about evolution of individual and social behaviour. This volume offers critique the contemporary psychological practices in India and offers a new perspective called ‘public psychology’ to construe and analyse the relationship between psychologists and their objects of study. Finally, some paradigmatic, pedagogical, and substantive issues are highlighted to restructure the practice of psychology in the Indian setting.

scholarly journals Silica Monolith for the Removal of Pollutants from Gas and Aqueous Phases

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1316
Author(s):  
Vanessa Miglio ◽  
Chiara Zaccone ◽  
Chiara Vittoni ◽  
Ilaria Braschi ◽  
Enrico Buscaroli ◽  
...  
Keyword(s):  
Rhodamine B ◽  
Water Solution ◽  
Synthesis Method ◽  
Textural Properties ◽  
Adsorption Properties ◽  
Water Soluble ◽  
Silica Monoliths ◽  
Physico Chemical ◽  
Gaseous Toluene ◽  
Mcm 41

This study focused on the application of mesoporous silica monoliths for the removal of organic pollutants. The physico-chemical textural and surface properties of the monoliths were investigated. The homogeneity of the textural properties along the entire length of the monoliths was assessed, as well as the reproducibility of the synthesis method. The adsorption properties of the monoliths for gaseous toluene, as a model of Volatile Organic Compounds (VOCs), were evaluated and compared to those of a reference meso-structured silica powder (MCM-41) of commercial origin. Silica monoliths adsorbed comparable amounts of toluene with respect to MCM-41, with better performances at low pressure. Finally, considering their potential application in water phase, the adsorption properties of monoliths toward Rhodamine B, selected as a model molecule of water soluble pollutants, were studied together with their stability in water. After 24 h of contact, the silica monoliths were able to adsorb up to the 70% of 1.5 × 10−2 mM Rhodamine B in water solution.

Theoretical Evaluation of Rheological State of Sand Cement Composite Systems with Polyoxyethylene Additive Using Topological Dynamics Concept

2016 ◽  
Vol 871 ◽  
pp. 96-103 ◽  
Author(s):  
Vladimir Erofeev ◽  
Aleksandr Bobryshev ◽  
Aleksandr Lakhno ◽  
Lenar Shafigullin ◽  
Ilnaz Khalilov ◽  
...  
Keyword(s):  
Water Solution ◽  
Cement Composite ◽  
Water Soluble ◽  
Viscosity Data ◽  
Active Components ◽  
Theoretical Evaluation ◽  
Composite Systems ◽  
Polymer Powder ◽  
Cement System ◽  
Phase Water

Presents the results of studies of contemporary materials in the field of rheological state. The topological mortar structure has been provided by theoretical evaluation of the rheological state of the cross-linked solutions and the experimental viscosity data of the sand cement mortar which has been modified by water-soluble additive – polyoxyethylene. The general model has been made for the structure of non-Newtonian liquideous systems including dilatant, pseudoplastic bodies with two main rheological active components in their structure – rigid and viscous phases. It is shown that in pseudoplastic systems, as the shear stress increases, the viscous phase grows because of the reduction of rigid phase content. In dilatant systems the converse situation has been observed. Furthermore, these phases are not clearly distinguishable, but to the contrary they are spatially interconnected in a complex way. The structure modeling has been made for non-Newtonian bodies using the Shklovskii-de Gennes model. The studies have found that the construction composite sand cement system is defined as the pseudoplastic body where cement and sand act as the rigid phase, water solution of polyoxyethylene – as the viscous phase. These findings can be used to prove the influence of polymer powder on the workability of dry mortar.

scholarly journals Influences of Molecular Weights on Physicochemical and Biological Properties of Collagen-Alginate Scaffolds

Marine Drugs ◽  
2021 ◽  
Vol 19 (2) ◽  
pp. 85 ◽  
Author(s):  
Truc Cong Ho ◽  
Jin-Seok Park ◽  
Sung-Yeoul Kim ◽  
Hoyeol Lee ◽  
Ju-Sop Lim ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Subcritical Water ◽  
Biological Properties ◽  
Ethanol Solution ◽  
Water Soluble ◽  
Potential Candidate ◽  
High Porosity ◽  
Engineering Applications ◽  
Molecular Weights

For tissue engineering applications, biodegradable scaffolds containing high molecular weights (MW) of collagen and sodium alginate have been developed and characterized. However, the properties of low MW collagen-based scaffolds have not been studied in previous research. This work examined the distinctive properties of low MW collagen-based scaffolds with alginate unmodified and modified by subcritical water. Besides, we developed a facile method to cross-link water-soluble scaffolds using glutaraldehyde in an aqueous ethanol solution. The prepared cross-linked scaffolds showed good structural properties with high porosity (~93%) and high cross-linking degree (50–60%). Compared with collagen (6000 Da)-based scaffolds, collagen (25,000 Da)-based scaffolds exhibited higher stability against collagenase degradation and lower weight loss in phosphate buffer pH 7.4. Collagen (25,000 Da)-based scaffolds with modified alginate tended to improve antioxidant capacity compared with scaffolds containing unmodified alginate. Interestingly, in vitro coagulant activity assay demonstrated that collagen (25,000 Da)-based scaffolds with modified alginate (C25-A63 and C25-A21) significantly reduced the clotting time of human plasma compared with scaffolds consisting of unmodified alginate. Although some further investigations need to be done, collagen (25,000 Da)-based scaffolds with modified alginate should be considered as a potential candidate for tissue engineering applications.

LONG‐TIME RESPONSE PREDICTED BY EXACT ELASTIC RAY THEORY

Geophysics ◽  
1965 ◽  
Vol 30 (3) ◽  
pp. 363-368 ◽  
Author(s):  
T. W. Spencer
Keyword(s):  
Formal Solution ◽  
Intermediate Stage ◽  
Time Limit ◽  
Time Interval ◽  
Individual Response ◽  
Axially Symmetric ◽  
Long Time ◽  
The Difference ◽  
The Individual ◽  
Significant Figures

The formal solution for an axially symmetric radiation field in a multilayered, elastic system can be expanded in an infinite series. Each term in the series is associated with a particular raypath. It is shown that in the long‐time limit the individual response functions produced by a step input in particle velocity are given by polynomials in odd powers of the time. For rays which suffer m reflections, the degree of the polynomials is 2m+1. The total response is obtained by summing all rays which contribute in a specified time interval. When the rays are selected indiscriminately, the difference between the magnitude of the partial sum at an intermediate stage of computation and the magnitude of the correct total sum may be greater than the number of significant figures carried by the computer. A prescription is stated for arranging the rays into groups. Each group response function varies linearly in the long‐time limit and goes to zero when convolved with a physically realizable source function.

Study of the Cause of Lost Circulation while Drilling Fractured Carbonates

2021 ◽  
Author(s):  
Alexey Ruzhnikov
Keyword(s):  
Success Rate ◽  
Drilling Fluid ◽  
Circulation Zone ◽  
Lost Circulation ◽  
Carbonate Formation ◽  
New Information ◽  
Fractured Carbonate ◽  
Long Time ◽  
The Difference ◽  
Fractured Carbonates

Abstract Fractured carbonate formations are prone to lost circulation, which affects the well construction process and has longtime effect on well integrity. Depending on the nature of losses (either induced or related to local dissolutions) the success rate is different when the induced losses can be cured with a high chance, and the one related to dissolutions may take a long time, and despite multiple attempts, the success rate is normally low. To have a better understanding of the complete losses across the fractured carbonates, a series of studies were initiated. First, to understand the strength of the loss zone, the fracture closing pressure was evaluated studying the fluid level in the annulus and back-calculating the effect of drilling fluid density. Second, the formation properties across the loss circulation zones were studied using microresistivity images, dip data, and imaging of fluid-saturated porous media. The results of the studies brought a lot of new information and explained some previous mysteries. The formation strength across the lost circulation zone was measured, and it was confirmed that it remains constant despite other changes of the well construction parameters. Additionally, it was confirmed that the carbonates are naturally highly fractured, having over 900 fractures along the wellbore. The loss circulation zone was characterized, and it was confirmed that the losses are not related to the fractures but rather to the karst, dissolution, and megafractures. The size and dip of the fractures were identified, and it was proven the possibility to treat them with conventional materials. However, the size of identified megafractures and karst zones exceeding the fractures by 10 times in true vertical depth, and in horizontal wells the difference is even higher due to measured depth. This new information helps to explain the previous unsuccessful attempts with the conventional lost circulation materials. The manuscript provides new information on the fractured carbonate formation characterization not available previously in the literature. It allows to align the subsurface and drilling visions regarding the nature of the losses and further develop the curing mechanisms.

scholarly journals Characteristics of the Water- and Alkali-Soluble Hemicelluloses Fractionated by Sequential Acidification and Graded-Ethanol from Sweet Maize Stems

Molecules ◽  
2019 ◽  
Vol 24 (1) ◽  
pp. 212 ◽  
Author(s):  
Xiaopeng Peng ◽  
Shuangxi Nie ◽  
Xiaoping Li ◽  
Xiong Huang ◽  
Quanzi Li
Keyword(s):  
Potassium Hydroxide ◽  
Ethanol Solution ◽  
Water Soluble ◽  
Hot Water ◽  
Fundamental Information ◽  
Composition And Structure ◽  
Structural Characterizations

Sweet maize stems were treated with hot water and potassium hydroxide to fractionate hemicellulosic polymers. The results showed that the water-soluble hemicelluloses were mainly composed of glucose (27.83%), xylose (27.32%), and galactose (16.81%). In comparison, alkali-soluble hemicelluloses fractionated by acidification and a graded ethanol solution (10%, 20%, 35%, 50%, 65%, and 80%) were mainly composed of xylose (69.73 to 88.62%) and arabinose (5.41 to 16.20%). More highly branched hemicelluloses tended to be precipitated in a higher concentration of ethanol solution, as revealed by the decreasing xylose to arabinose ratio from 16.43 to 4.21. Structural characterizations indicated that alkali-soluble hemicelluloses fractionated from sweet maize stems were mainly arabinoxylans. The results provided fundamental information on hemicelluloses composition and structure and their potential utilization in the fields of biofuels, biochemicals, and biomaterials.

Flow Properties of Utah Shale Oils

1981 ◽  
Vol 21 (06) ◽  
pp. 679-686 ◽  
Author(s):  
W.H. Seitzer
Keyword(s):  
Shear Stress ◽  
Shear Rate ◽  
Pour Point ◽  
Water Solution ◽  
Shale Oil ◽  
Concentric Cylinder ◽  
Long Distance ◽  
Time Calibration ◽  
The Difference ◽  
Cylinder Viscometer

Abstract In a concentric cylinder viscometer. Utah shale oils have different characteristics, both at equilibrium flow and during start-up from rest, depending on whether the wax has crystallized as needles or spherulites. Compared with waxy crude oils, which are thixotropic, shale oil had the added rheological property of being antithixotropic. Introduction The most likely liquid synthetic fuel to be produced initially in the U.S. will be raw shale oil from western oil shale. This abundant resource is located principally in the western Rocky Mountain states of Colorado. Utah. and Wyoming (Fig. 1). Ultimate commercial production probably will be transported to marketing, distribution, and refining centers by pipeline. It has been reported that Utah shale oils produced by the Union "B" and Paraho DH retorting processes gave similar physical and chemical properties. Some properties of the two Utah shale oils are given in Table 1. The only major difference is that the Union shale oil has a pour point of - 1 degree C compared with a pour point of 25 degrees C for the Paraho oil. Wax Crystallization The difference in the pour points of the oils from the Utah shale retorted by Union Oil Co of California and Paraho is caused mainly by the difference in how the wax in the respective oils crystallizes. In the high- pour-point (25 degrees C) Paraho DK oil, the wax, under a microscope, appears as fine (1 to 10 m) needles, as expected for normal paraffins. However, the wax in the low-pour-point (−1 degrees C) Union oil forms small spherulites.Wax spherulites have not been reported before: however, this type of crystal is seen commonly in polymer. Spherulites show up as round areas containing a maltese cross when observed between crossed polars under a microscope.Photomicrographs of these crystals are shown in Figs. 2 and 3. The former, showing spherulites, is of the Union oil. In contrast, they are very different from the customary needles as typified by the Paraho oil in the latter micrograph. Presumably, these highly ordered spheres are made up of wax needles grown out radially from the center as described by Hartshorne and Stuart. The polarized light is scattered only by those needles not parallel nor perpendicular to the plane of polarization. Viscometer Measurements To understand the effect of these spherulites on the flow characteristics of raw shale oil at flow conditions expected in a long-distance pipeline, typical stress-rate measurements were made in a rotating cylinder viscometer, the Haake Rotovisco RV3 with MK500 measuring head and MVI coaxial cylinder sensor having an 82-mm cup and radii ratio of 0.95. This equipment has provisions for varying shear rate continuously at selected values down to 23.4 sec(−1)/min and can produce and record shear stress as a function of either shear rate or time. Calibration of the sensor was verified with a sucrose/water solution at several temperatures.Changes in temperature always were made from lower to higher to keep the sensor full of oil. Also, the shear-stress/ shear-rate curves were obtained by starting at high shear, down to zero, and then back up. SPEJ P. 679^

Sign in / Sign up

Export Citation Format

Share Document