scholarly journals Quantification of denitrification in permeable sediments: Insights from a two-dimensional simulation analysis and experimental data

2006 ◽  
Vol 4 (9) ◽  
pp. 294-307 ◽  
Author(s):  
Perran L. M. Cook ◽  
Frank Wenzhöfer ◽  
Søren Rysgaard ◽  
Oleksiy S. Galaktionov ◽  
Filip J. R. Meysman ◽  
...  
2013 ◽  
Vol 455 ◽  
pp. 94-98 ◽  
Author(s):  
Lei Wang ◽  
Ben Xian Shen ◽  
Ruo Fan Ren ◽  
Ji Gang Zhao

A two-dimensional pseudo-homogenous mathematical model was established according to the Au-Cu non-mercury catalytic reaction kinetics. The Crank-Nicholson method was used to solve the equations on the basis of experimental data. The results showed that a violent reaction at the entrance of the fixed bed reactor led to a hot spot in the acetylene hydrochlorination reaction over the Au-Cu Non-mercury catalyst. The conversion increased rapidly initially, and then flattened gradually in the axial direction. The result of simulation provided valuable data to optimize the design of reactor and the industrial operation conditions.


Author(s):  
Shouxu Song ◽  
Mengcheng Hu ◽  
Yan Xia

In order to optimize and analyze the cogging torque of hybrid stator motor, a hybrid stator motor is taken as the research project. The axial distribution of air gap magnetic flux density was analyzed, and the analytical formula of the cogging torque of the hybrid stator motor was derived. Combined with the cogging torque analytical formula, the superposition calculation method of cogging torque of hybrid stator motor was proposed, and the correctness of the superposition calculation method was verified by simulation analysis. The silicon steel segment and the amorphous alloy segment of hybrid stator core were optimized by using the uneven air gap structure, and the optimized results of the silicon steel segment and the amorphous alloy segment were obtained by two-dimensional simulation. Based on the results of two-dimensional simulation analysis, a three-dimensional model was built for simulation analysis. After optimization, the cogging torque of the motor was weakened by 48.1% and the torque ripple was reduced by 1.32%, while the loss and output torque remained basically unchanged.


2001 ◽  
Vol 6 (2) ◽  
pp. 3-14 ◽  
Author(s):  
R. Baronas ◽  
F. Ivanauskas ◽  
I. Juodeikienė ◽  
A. Kajalavičius

A model of moisture movement in wood is presented in this paper in a two-dimensional-in-space formulation. The finite-difference technique has been used in order to obtain the solution of the problem. The model was applied to predict the moisture content in sawn boards from pine during long term storage under outdoor climatic conditions. The satisfactory agreement between the numerical solution and experimental data was obtained.


2018 ◽  
Author(s):  
Haibo Li ◽  
Maocheng Tian ◽  
Xiaohang Qu ◽  
Min Wei

AIP Advances ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 055209
Author(s):  
Yong Che ◽  
Qing Zang ◽  
Xiaofeng Han ◽  
Shumei Xiao ◽  
Kai Huang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document