WAM High Speed Load Capacity Test Method

2017 ◽  
Author(s):  
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Test Method

scholarly journals Improvement of Tilting-Pad Journal Bearing Operating Characteristics by Application of Eddy Grooves

Lubricants ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 18
Author(s):  
Eckhard Schüler ◽  
Olaf Berner
Keyword(s):  
High Speed ◽  
Journal Bearing ◽  
Load Capacity ◽  
Fluid Film ◽  
Operating Characteristics ◽  
Fluid Film Bearings ◽  
Tilting Pad ◽  
Bearing Load ◽  
Bearing Loads ◽  
Tilting Pad Journal Bearing

In high speed, high load fluid-film bearings, the laminar-turbulent flow transition can lead to a considerable reduction of the maximum bearing temperatures, due to a homogenization of the fluid-film temperature in radial direction. Since this phenomenon only occurs significantly in large bearings or at very high sliding speeds, means to achieve the effect at lower speeds have been investigated in the past. This paper shows an experimental investigation of this effect and how it can be used for smaller bearings by optimized eddy grooves, machined into the bearing surface. The investigations were carried out on a Miba journal bearing test rig with Ø120 mm shaft diameter at speeds between 50 m/s–110 m/s and at specific bearing loads up to 4.0 MPa. To investigate the potential of this technology, additional temperature probes were installed at the crucial position directly in the sliding surface of an up-to-date tilting pad journal bearing. The results show that the achieved surface temperature reduction with the optimized eddy grooves is significant and represents a considerable enhancement of bearing load capacity. This increase in performance opens new options for the design of bearings and related turbomachinery applications.

Numerical and experimental studies on the thermal and static characteristics of multi-leaf foil thrust bearing

2021 ◽  
pp. 135065012110110
Author(s):  
Yu Guo ◽  
Yu Hou ◽  
Qi Zhao ◽  
Xionghao Ren ◽  
Shuangtao Chen ◽  
...  
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Failure Process ◽  
Experimental Studies ◽  
Elastic Model ◽  
Static Characteristics ◽  
Bearing Load ◽  
Foil Thrust Bearing ◽  
Cooling Air

Foil bearing is considered to be a promising supporting technology in high-speed centrifugal machinery. Due to the high-speed shearing effect in the viscous lubricant film, heat generation could not be ignored. In this paper, a thermo-elastic model of the multi-leaf foil thrust bearing is proposed to predict its thermal and static characteristics. In the model, modified Reynolds equation, energy equation, and Kirchhoff equation are solved in a coupling way. The contact area between the foil and welding plate is taken into account. Besides, the effect of cooling air on the bearing temperature is investigated. The ultimate load capacity and transient overload failure process of the bearing is analyzed and discussed. The effect of rotation speed on the bearing temperature is more obvious than that of the bearing load. The bearing temperature drops obviously by introducing the cooling air, and the cooling effect is improved with the supply pressure. The transient overload failure of the bearing occurs when the bearing load exceeds the ultimate value.

Rotordynamic Performance of a Rotor Supported on Bump Type Foil Gas Bearings: Experiments and Predictions

2006 ◽  
Vol 129 (3) ◽  
pp. 850-857 ◽  
Author(s):  
Luis San Andrés ◽  
Dario Rubio ◽  
Tae Ho Kim
Keyword(s):  
High Speed ◽  
Critical Speed ◽  
Load Capacity ◽  
Test System ◽  
Foil Bearings ◽  
Rotor Imbalance ◽  
Synchronous Motion ◽  
Damping Characteristics ◽  
Rotor Surface ◽  
Stiffness And Damping

Gas foil bearings (GFBs) satisfy the requirements for oil-free turbomachinery, i.e., simple construction and ensuring low drag friction and reliable high speed operation. However, GFBs have a limited load capacity and minimal damping, as well as frequency and amplitude dependent stiffness and damping characteristics. This paper provides experimental results of the rotordynamic performance of a small rotor supported on two bump-type GFBs of length and diameter equal to 38.10mm. Coast down rotor responses from 25krpm to rest are recorded for various imbalance conditions and increasing air feed pressures. The peak amplitudes of rotor synchronous motion at the system critical speed are not proportional to the imbalance introduced. Furthermore, for the largest imbalance, the test system shows subsynchronous motions from 20.5krpm to 15krpm with a whirl frequency at ∼50% of shaft speed. Rotor imbalance exacerbates the severity of subsynchronous motions, thus denoting a forced nonlinearity in the GFBs. The rotor dynamic analysis with calculated GFB force coefficients predicts a critical speed at 8.5krpm, as in the experiments; and importantly enough, unstable operation in the same speed range as the test results for the largest imbalance. Predicted imbalance responses do not agree with the rotor measurements while crossing the critical speed, except for the lowest imbalance case. Gas pressurization through the bearings’ side ameliorates rotor subsynchronous motions and reduces the peak amplitudes at the critical speed. Posttest inspection reveal wear spots on the top foils and rotor surface.

Prototype Design of a High-Speed Viscous Air Spindle

2008 ◽  
Author(s):  
Guido M. J. Delhaes ◽  
Anton van Beek ◽  
Ron A. J. van Ostayen ◽  
Robert H. Munnig Schmidt
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Axial Direction ◽  
Cylindrical Part ◽  
Traction Forces ◽  
Micro Cutting ◽  
Tool Holder ◽  
Air Spindle ◽  
Prototype Design

In this paper an innovative air driven spindle for micro cutting applications is presented. The spindle uses a viscous traction concept which has the advantage that the viscous traction forces can act directly on the cylindrical part of the tool, which makes the tool-holder redundant. Furthermore, the tool can be actuated in the axial direction within the housing. In this paper the concept of the viscous turbine, a design of a prototype spindle along with the traction and load-capacity of the spindle are discussed.

scholarly journals Thin Gas Film Isothermal Condensation in Aerodynamic Bearings

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Eliott Guenat ◽  
Jürg Schiffmann
Keyword(s):  
High Speed ◽  
Waste Heat ◽  
Load Capacity ◽  
Saturation Pressure ◽  
Operating Conditions ◽  
Fluid Film ◽  
Small Scale ◽  
Vapor Compression ◽  
Density Profiles ◽  
Film Pressure

Abstract High-speed small-scale turbomachinery for waste heat recovery and vapor compression cycles is typically supported on gas-lubricated bearings operating close to the saturation conditions of the lubricant. Under particular conditions, the gas film might locally reach the saturation pressure with potentially hazardous effects on the performance of the gas bearing. The present work introduces a model based on the Reynolds equation and the development of cavitation modeling in liquid-lubricated bearings for condensing gas bearings. The effect of condensation on load capacity and pressure and density profiles is investigated for two one-dimensional bearing geometries (parabolic and Rayleigh step) and varying operating conditions. The results suggest that the load capacity is generally negatively affected if condensation occurs. An experimental setup consisting of a Rayleigh-step gas journal bearing with pressure taps to measure the local fluid film pressure is presented and operated in R245fa in near-saturated conditions. The comparison between the evolution of the fluid film pressure under perfect gas and near saturation conditions clearly suggests the occurrence of condensation in the fluid film. These results are corroborated by the very good agreement with the model prediction.

scholarly journals Biaxial Shear Load Capacity of Anchor System for Quick-Hardening Track on Railway Bridges

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Kyoung Chan Lee ◽  
Il-Wha Lee ◽  
Seong-Cheol Lee
Keyword(s):  
High Speed ◽  
Ride Comfort ◽  
Load Capacity ◽  
Frictional Resistance ◽  
Shear Capacity ◽  
Railway Track ◽  
Railway Bridges ◽  
Anchor System ◽  
Ballast Track ◽  
Anchor Systems

Quick-hardening railway track was developed to rapidly convert old-style ballast track to slab track in order to improve its maintainability and ride comfort. On bridges, quick-hardening track is applied in a segmented structure to reduce the temperature constraint, and anchors at the centers of the segments securely couple the track to the bridge. In this study, an anchor system is proposed that facilitates fast construction, and two designs for the proposed anchor systems are provided along with experimental test results of the same. Two anchor system designs were developed to allow for the maximum possible longitudinal and transverse loads in high-speed railways while considering the frictional resistance between the track slab and bridge deck. The biaxial shear capacity of each design was investigated experimentally, and the structural capacity for biaxial shear loads was evaluated using an elliptical curve to represent the longitudinal and transverse shear capacities. The minimum friction coefficient was determined based on the results of the evaluation to minimize damage to the anchor. The results obtained from the experiments confirmed that the proposed anchor systems possess sufficient shear capacity for application on high-speed railway bridges.

Rotordynamics Performance of Hybrid Foil Bearing Under Forced Vibration Input

2017 ◽  
Author(s):  
Daejong Kim ◽  
Brian Nicholson ◽  
Lewis Rosado ◽  
Garry Givan
Keyword(s):  
Impulse Response ◽  
High Speed ◽  
Load Capacity ◽  
Supply System ◽  
Forced Response ◽  
Experimental Results ◽  
Lateral Acceleration ◽  
Foil Bearings ◽  
Foil Bearing ◽  
Gas Supply

Foil bearings are one type of hydrodynamic air/gas bearings but with a compliant bearing surface supported by structural material that provides stiffness and damping to the bearing. The hybrid foil bearing (HFB) in this paper is a combination of a traditional hydrodynamic foil bearing with externally-pressurized air/gas supply system to enhance load capacity during the start and to improve thermal stability of the bearing. The HFB is more suitable for relatively large and heavy rotors where rotor weight is comparable to the load capacity of the bearing at full speed and extra air/gas supply system is not a major added cost. With 4,448N∼22,240N thrust class turbine aircraft engines in mind, the test rotor is supported by HFB in one end and duplex rolling element bearings in the other end. This paper presents experimental work on HFB with diameter of 102mm performed at the US Air force Research Laboratory. Experimental works include: measurement of impulse response of the bearing to the external load corresponding to rotor’s lateral acceleration of 5.55g, forced response to external subsynchronous excitation, and high speed imbalance response. A non-linear rotordynamic simulation model was also applied to predict the impulse response and forced subsynchronous response. The simulation results agree well with experimental results. Based on the experimental results and subsequent simulations, an improved HFB design is also suggested for higher impulse load capability up to 10g and rotordynamics stability up to 30,000rpm under subsynchronous excitation.

Experimental Test Results for Four High-Speed, High-Pressure, Orifice-Compensated Hybrid Bearings

1994 ◽  
Vol 116 (1) ◽  
pp. 147-153 ◽  
Author(s):  
N. M. Franchek ◽  
D. W. Childs
Keyword(s):  
High Speed ◽  
Load Capacity ◽  
Pressure Ratio ◽  
Reynolds Numbers ◽  
Orifice Diameter ◽  
Test Results ◽  
Rotordynamic Coefficients ◽  
Geometric Configurations ◽  
Overall Performance ◽  
Mass Terms

In this study, four hybrid bearings having different geometric configurations were experimentally tested for their static and dynamic characteristics, including flowrate, load capacity, rotordynamic coefficients, and whirl frequency ratio. The four bearings included a square-recess, smooth-land, radial-orifice bearing (baseline), a circular-recess bearing, a triangular-recess bearing, and an angled-orifice bearing. Each bearing had the same orifice diameter rather than the same pressure ratio. Unique to these test results is the measurement of the added mass terms, which became significant in the present tests because of high operating Reynolds numbers. Comparisons of the results were made between bearings to determine which bearing had the best performance. Based on the parameters of interest, the angled-orifice bearing has the most favorable overall performance.

Round-Robin of High-Frequency Test Methods by IPC-D24C Task Group

2016 ◽  
Vol 13 (3) ◽  
pp. 77-94
Author(s):  
Glenn Oliver ◽  
Jonathan Weldon ◽  
Chudy Nwachukwu ◽  
John Andresakis ◽  
John Coonrod ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
High Frequency ◽  
High Speed ◽  
Test Methods ◽  
Round Robin ◽  
Standard Test ◽  
Test Method ◽  
Task Group ◽  
Circuit Board ◽  
Industry Standard

Currently, there is no industry standard test method for measuring dielectric properties of circuit board materials at frequencies greater than ~10 GHz. Various material vendors and test laboratories apply different approaches to determine these properties. It is common for these different approaches to yield varying values of key properties such as permittivity and loss tangent. The D-24C Task Group of IPC has developed this round-robin program to assess these various methods from the “bottom up” to determine if standardized methods can be agreed upon to provide the industry with more accurate and valid characteristics of dielectrics used in high-frequency and high-speed applications.

Sign in / Sign up

Export Citation Format

Share Document