Elastomer: Methyl/Methyl Vinyl Silicone, (MQ/MVQ), High Temperature/Gas Turbine Engine Oil/Phosphate Esther Hydraulic Fluid Resistant, High Strength/High Tear/High Modulus 55 to 65 Type “A” Hardness, for Products in High Temperature Environments/Gas Turbine Engine Oils

2019 ◽  
Author(s):  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
High Strength ◽  
Gas Turbine Engine ◽  
Engine Oil ◽  
High Modulus ◽  
Turbine Engine ◽  
Methyl Vinyl ◽  
Engine Oils ◽  
High Temperature Gas

Paper 7: Advanced Nickel-Chromium Base Alloys

1965 ◽  
Vol 180 (4) ◽  
pp. 160-171
Author(s):  
C. H. White ◽  
J. Heslop
Keyword(s):  
High Temperature ◽  
Binary System ◽  
Gas Turbine ◽  
Elevated Temperatures ◽  
High Strength ◽  
Gas Turbine Engine ◽  
Turbine Engine ◽  
Nickel Chromium ◽  
Chromium Alloys ◽  
Resistance To Oxidation

Nickel-chromium alloys have been in use since early in this century for high temperature applications because of their resistance to oxidation. Since the advent of the gas-turbine engine, more complex alloys capable of maintaining high strength at elevated temperatures have been developed from the simple binary system. These complex alloys were initially mainly strengthened by the precipitation of the Ni3(Ti, Al) phase but more recent alloys have been further strengthened by additions of cobalt, tungsten, molybdenum, niobium, and tantalum. The properties and applications of these alloys are discussed.

Epoxy-free high-temperature fiber optic pressure sensors for gas turbine engine applications

2004 ◽  
Author(s):  
Juncheng Xu ◽  
Gary Pickrell ◽  
Bing Yu ◽  
Ming Han ◽  
Yizheng Zhu ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Fiber Optic ◽  
Pressure Sensors ◽  
Gas Turbine Engine ◽  
Turbine Engine

Conditions for Scuffing Failure of Ground and Superfinished Steel Disks at High Sliding Speeds Using a Gas Turbine Engine Oil

1995 ◽  
Vol 117 (3) ◽  
pp. 482-489 ◽  
Author(s):  
M. J. Patching ◽  
C. C. Kweh ◽  
H. P. Evans ◽  
R. W. Snidle
Keyword(s):  
Experimental Investigation ◽  
Gas Turbine ◽  
Surface Finish ◽  
Axial Direction ◽  
Gas Turbine Engine ◽  
Hardened Steel ◽  
Engine Oil ◽  
Turbine Engine ◽  
Involute Gears ◽  
Scuffing Failure

This paper describes the results of an experimental investigation to compare the scuffing performance of conventionally ground and superfinished hardened steel disks operating at sliding speeds of up to 26 m/s and lubricated with a gas turbine engine oil at a temperature of 100° C. The ground disks were finished in the axial direction to simulate the orientation of surface finish found on involute gears. Superfinishing was found to give a significant increase in the load at which scuffing occurred. Frictional traction was also measured in the experiments and was found to be significantly lower for the superfinished disks in the loading stages preceding scuffing failure.

Lube Oil and Bearing Thermal Management System

2009 ◽  
Author(s):  
Karleine M. Justice ◽  
Jeffrey S. Dalton ◽  
Ian Halliwell ◽  
Stephen Williamson
Keyword(s):  
Heat Exchanger ◽  
Gas Turbine ◽  
Thermal Management ◽  
Gas Turbine Engine ◽  
System Level ◽  
Engine Oil ◽  
Management Systems ◽  
Lubrication System ◽  
Turbine Engine ◽  
Heat Loads

Recent improvements in technology have enabled the development of models capable of capturing performance interactions in the thermal management of air vehicle systems. Such system level models are required for better understanding of integration constraints and interactions, and are becoming increasingly important because of the need for tighter coupling between the components of thermal management systems. The study described here integrates current engine modeling capabilities with an improved, more comprehensive thermal management simulation. More specifically, the current effort evaluates the heat loads associated with the lubrication system of a gas turbine engine. The underlying engine model represents a mid-size, two-spool, subsonic transport engine. The architecture of the model is adaptable to other two-spool turbine engines and missions. Mobil Avrex S Turbo 256 engine oil is used as the lubrication medium. The model consists of five bearing heat loads. Within the engine flowpath, local temperatures and the appropriate rotational speeds are the only parameters pertinent to the heat load calculations. General assumptions have been made to simplify the representation of the lubrication system. Fuel properties into the heat exchanger are assumed. A gear box attached to the high-speed shaft operates both supply pump and scavenge pump and sends compressed air to the oil reservoir. Once the oil is distributed to the bearings, the scavenge pump collects and sends it through a filter and a fuel/oil heat exchanger before it is remixed with the contents of the reservoir. A MATLAB/Simulink modeling environment provides a general approach that may be applied to the thermal management of any engine. As a result of this approach, the new model serves as a starting point for a flexible architecture that can be modified as more detailed specifications or data are made available. In this paper, results from the simple model are compared to a more comprehensive tribology-based analysis. The results demonstrate its successful application to a typical mission, based on very limited data. In general, these results will allow system designers to conduct preliminary analyses and trade studies of gas turbine engine thermal management systems.

Sign in / Sign up

Export Citation Format

Share Document