Cosmetic Corrosion Mechanism of Zinc and Zinc Alloy Coated Steel Sheet for Automobiles

1985 ◽  
Author(s):  
Yasuhiko Miyoshi ◽  
Minoru Kitayama ◽  
Kazumi Nishimura ◽  
Shigeru Naito
Keyword(s):  
Steel Sheet ◽  
Zinc Alloy ◽  
Corrosion Mechanism ◽  
Coated Steel ◽  
Coated Steel Sheet

Friction-Stir Spot Mechanical Joining between Hot-Dip 55% Aluminum–Zinc Alloy-Coated Steel Sheet and A5083 Aluminum Alloy Plate Using Conventional Punching

2020 ◽  
Vol 853 ◽  
pp. 8-12
Author(s):  
Takahiro Ohashi ◽  
Taiki Ohno ◽  
Yuki Shiraishi ◽  
Hamed Mofidi Tabatabaei ◽  
Tadashi Nishihara
Keyword(s):  
Aluminum Alloy ◽  
Steel Sheet ◽  
Rear Surface ◽  
Zinc Alloy ◽  
Coated Steel ◽  
Alloy Plate ◽  
Mechanical Joining ◽  
Friction Stir ◽  
Coated Steel Sheet ◽  
Aluminum Alloy Plate

In this study, we fabricated a mechanical joining with spot friction-stirring between an aluminum alloy plate and an aluminum–zinc alloy-coated steel sheet; this was achieved by utilizing a conventional press-punching preprocess. In the preprocessing, a hot-dip 55% aluminum–zinc alloy-coated steel sheet was punched using a press and an inclined surface was generated at the wall of a punched hole due to shear droop. Subsequently, an A5083P-O aluminum alloy plate was positioned against it, and friction stirring was conducted on its rear surface. The hole was filled with the aluminum alloy to generate a mechanical interlock at the tilt of the wall. Further, we evaluated its cross tensile strength (CTS) and tensile shear strength (TSS) and obtained an average CTS and TSS of 368 kN and 1470 kN, respectively.

Sign in / Sign up

Export Citation Format

Share Document