scholarly journals Combustion Noise Reduction with High Thermal Efficiency by the Control of Multiple Fuel Injections in Premixed Diesel Engines

2017 ◽  
Vol 10 (3) ◽  
pp. 1128-1142 ◽  
Author(s):  
Gen Shibata ◽  
Hideyuki Ogawa ◽  
Yuki Okamoto ◽  
Yasumasa Amanuma ◽  
Yoshimitsu Kobashi
Keyword(s):  
Noise Reduction ◽  
Diesel Engines ◽  
Thermal Efficiency ◽  
Combustion Noise

scholarly journals Optimization of multiple heat releases in pre-mixed diesel engine combustion for high thermal efficiency and low combustion noise by a genetic-based algorithm method

2018 ◽  
Vol 20 (5) ◽  
pp. 540-554 ◽  
Author(s):  
Gen Shibata ◽  
Hideyuki Ogawa ◽  
Yasumasa Amanuma ◽  
Yuki Okamoto
Keyword(s):  
High Temperature ◽  
Diesel Engine ◽  
Heat Release ◽  
Noise Reduction ◽  
Thermal Efficiency ◽  
Fuel Injection ◽  
Combustion Noise ◽  
Two Stage ◽  
Temperature Heat ◽  
Optimum Heat

The reduction of diesel combustion noise by multiple fuel injections maintaining high indicated thermal efficiency is an object of the research reported in this article. There are two aspects of multiple fuel injection effects on combustion noise reduction. One is the reduction of the maximum rate of pressure rise in each combustion, and the other is the noise reduction effects by the noise canceling spike combustion. The engine employed in the simulations and experiments is a supercharged, single-cylinder direct-injection diesel engine, with a high pressure common rail fuel injection system. Simulations to calculate the combustion noise and indicated thermal efficiency from the approximated heat release by Wiebe functions were developed. In two-stage high temperature heat release combustion, the combustion noise can be reduced; however, the combustion noise in amplification frequencies must be reduced to achieve further combustion noise reduction, and an additional heat release was added ahead of the two-stage high temperature heat release combustion in Test 1. The simulations of the resulting three-stage high temperature heat release combustion were conducted by changing the heating value of the first heat release. In Test 2 where the optimum heat release shape for low combustion noise and high indicated thermal efficiency was investigated and the role of each of the heat releases in the three-stage high temperature heat release combustion was discussed. In Test 3, a genetic-based algorithm method was introduced to avoid the time-consuming loss and great care in preparing the calculations in Test 2, and the optimum heat release shape and frequency characteristics for combustion noise by the genetic-based algorithm method were speedily calculated. The heat release occurs after the top dead center, and the indicated thermal efficiency and overall combustion noise were 50.5% and 86.4 dBA, respectively. Furthermore, the optimum number of fuel injections and heat release shape of multiple fuel injections to achieve lower combustion noise while maintaining the higher indicated thermal efficiency were calculated in Test 4. The results suggest that the constant pressure combustion after the top dead center by multiple fuel injections is the better way to lower combustion noise; however, the excess fuel injected leads to a lower indicated thermal efficiency because the degree of constant volume becomes deteriorates.

What Are the Barriers Against Brake Thermal Efficiency beyond 55% for HD Diesel Engines?

2021 ◽  
Author(s):  
Kazumasa Watanabe ◽  
Noboru Uchida ◽  
Kazuhiro Yokogawa ◽  
Fumihiro Kawaharazuka
Keyword(s):  
Diesel Engines ◽  
Thermal Efficiency ◽  
Brake Thermal Efficiency

A Signal Processing of In-Cylinder Pressure for the Resonant Frequency Prediction of Combustion Process in Diesel Engines

2018 ◽  
Author(s):  
Ximing Chen ◽  
Long Liu ◽  
Jiguang Zhang ◽  
Jingtao Du
Keyword(s):  
Signal Processing ◽  
Fourier Transform ◽  
Wavelet Transform ◽  
Resonant Frequency ◽  
Diesel Engines ◽  
Combustion Process ◽  
Combustion Noise ◽  
Injection Timing ◽  
Cylinder Pressure ◽  
Empirical Wavelet Transform

The combustion resonance is a focal point of the analysis of combustion and thermodynamic processes in diesel engines, such as detecting ‘knock’ and predicting combustion noise. Combustion resonant frequency is also significant for the estimation of in-cylinder bulk gas temperature and trapped mass. Normally, the resonant frequency information is contained in in-cylinder pressure signals. Therefore, the in-cylinder pressure signal processing is used for resonant frequency calculation. Conventional spectral analyses, such as FFT (Fast Fourier transform), are unsuitable for processing in-cylinder pressure signals because of its non-stationary characteristic. Other approaches to deal with non-stationary signals are Short-Time Fourier Transform (STFT) and Continue Wavelet Transform (CWT). However, the choice of size and shape of window for STFT and the selection of wavelet basis for CWT are totally empirical, which is the limit for precisely calculating the resonant frequency. In this study, an approach based on Empirical Wavelet Transform (EWT) and Hilbert Transform (HT) is proposed to process in-cylinder pressure signals and extract resonant frequencies. In order to decompose in-cylinder pressure spectrum precisely, the EWT are applied for separating the frequency band corresponding combustion resonance mode from other irrelevant modes adaptively. The signals containing combustion resonant mode is processed by HT, so that the instantaneous resonant frequency and amplitude can be extracted. Validation is performed by four in-cylinder pressure signals with different injection timing. And the effects of injection timing on resonant frequency are discussed.

Experimental Study on the Combustion Process and Performance of Diesel Engines Fueled by Emulsion Diesel With Novel Organic Additives

2013 ◽  
Author(s):  
Wenming Yang ◽  
Hui An ◽  
Jing Li ◽  
Amin Maghbouli ◽  
Kian Jon Chua
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Thermal Efficiency ◽  
Gasoline Engine ◽  
Combustion Process ◽  
Nox Emissions ◽  
Organic Additives ◽  
Oil Droplets ◽  
And Performance ◽  
One Year

Transportation is one of the major contributors to the world’s energy consumption and greenhouse gases emissions. The need for increased efficiency has placed diesel engine in the spotlight due to its superior thermal efficiency and fuel economy over gasoline engine. However, diesel engines also face the major disadvantage of increased NOx emissions. To address this issue, three types of emulsion fuels with different water concentrations (5%, 10% and 15% mass water) are produced and tested. Novel organic materials (glycerin and ployethoxy-ester) are added in the fuel to provide extra oxygen for improving combustion. NP-15 is added as surfactant which can help to reduce the oil and water surface tension, activates their surface, and maximizes their superficial contact areas, thereby forming a continuous and finely dispersed droplets phase. The stability of the emulsion fuels is tested under various environmental temperature for one year, and no significant separation is observed. It is better than normal emulsion fuel which can only maintain the state for up to three months. The combustion process and performance of the emulsion fuels are tested in a four-stroke, four cylinder diesel engine. The results indicate that the water droplets enclosed in the emulsion fuel explode at high temperature environment and help to break up the big oil droplets into smaller ones, thereby significantly increase the surface area of the oil droplets and enhance the heat transfer from hot gas to the fuel. As a result, the fuel evaporation is improved and the combustion process is accelerated, leading to an improved brake thermal efficiency (up to 14.2%). Meanwhile, the presence of the water causes the peak temperature of the flame to drop, thereby significantly bringing down the NOx emissions by more than 30%.

Use of Ethanol Based Oxygenates for Smoke Reduction in C.I. Engines

2005 ◽  
Author(s):  
Dhananjay B. Zodpe ◽  
Nishikant V. Deshpande
Keyword(s):  
Experimental Investigation ◽  
Fuel Economy ◽  
Diesel Engines ◽  
Thermal Efficiency ◽  
Substantial Reduction ◽  
Brake Thermal Efficiency ◽  
Gasoline Engines ◽  
Brake Power ◽  
Smoke Density ◽  
Harmful Effects

Diesel Engines have better fuel economy compared to gasoline engines. Society is now aware of various harmful effects of pollution and various researchers are trying to use fuel reformulation method to meet the forthcoming stringent air pollution norms for the diesel engines. This paper presents an experimental investigation on use of three different low price ethanol based oxygenate-diesel blends (oxygenate 4, 8 and 12% in blend) as an oxygen enriched fuel in diesel engine and its effect on brake thermal efficiency, smoke density and emissions of CO, HC, NOx etc is studied. It was observed that there is substantial reduction in the smoke density of exhaust gases and the observed reduction was found proportional to the mass of oxygen present in the blend. Marginal increase in NOx and brake thermal efficiency was observed and there was no significant change in the brake power of the engine.

Sign in / Sign up

Export Citation Format

Share Document