Effects of Combustion Chamber Insulation on the Heat Rejection and Thermal Efficiency of Diesel Engines

1992 ◽  
Author(s):  
Shuji Kimura ◽  
Yukio Matsui ◽  
Takane Itoh
Keyword(s):  
Combustion Chamber ◽  
Diesel Engines ◽  
Thermal Efficiency ◽  
Heat Rejection

Impact of Oxidation Inhibitors on Performance and Emission Characteristics of a Low Heat Rejection Engine

2017 ◽  
Vol 8 (4) ◽  
Author(s):  
P.S. Kumar ◽  
S.A. Kannan ◽  
A. Kumar ◽  
K.A.V. Geethan
Keyword(s):  
Combustion Chamber ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Nox Emission ◽  
Emission Characteristics ◽  
Brake Thermal Efficiency ◽  
Heat Rejection ◽  
Oxidation Inhibitors ◽  
Low Heat Rejection Engine

In this study, for the first time analysis of a low heat rejection engine was carried out along with the addition of oxidation inhibitors. If the combustion chamber components of the engine such as piston, cylinder head, and inlet and outlet valves are insulated with a thermal barrier material, then the engine will be referred as low heat rejection engine. In this study yttria stabilized zirconia was coated on the combustion chamber components for a thickness of about 150 microns. Then the analysis of performance parameters such as brake thermal efficiency and specific fuel consumption and emission characteristics such as emission of carbon monoxide, hydrocarbon and nitrogen oxide was carried out in single cylinder four stroke diesel engine with electrical loading using diesel and pongamia methyl ester as the fuels. The major problem associated with the usage of biodiesels and low heat rejection engine is the increased NOX emission than the normal engine operated with the diesel. This problem has been overcome by the usage of oxidation inhibitors such as ethyl hexyl nitrate (EHN), tert-butyl hydroquinone (TBHQ). The results showed that addition of oxidation inhibitors leads to increase in brake thermal efficiency, reduced specific fuel consumption and reduced NOX emission.

scholarly journals Analysis of combustion performance and emission of extended expansion cycle and iEGR for low heat rejection turbocharged direct injection diesel engines

2014 ◽  
Vol 18 (1) ◽  
pp. 129-142 ◽  
Author(s):  
Mohd Shabir ◽  
Rajendra Prasath ◽  
P. Tamilporai
Keyword(s):  
Nitric Oxide ◽  
Diesel Engines ◽  
Thermal Efficiency ◽  
Direct Injection ◽  
High Heat ◽  
Operating Conditions ◽  
Blow Down ◽  
Heat Rejection ◽  
Performance And Emission ◽  
Combustion Performance

Increasing thermal efficiency in diesel engines through low heat rejection concept is a feasible technique. In LHR engines the high heat evolution is achieved by insulating the combustion chamber surfaces and coolant side of the cylinder with partially stabilized zirconia of 0.5 mm thickness and the effective utilization of this heat depend on the engine design and operating conditions. To make the LHR engines more suitable for automobile and stationary applications, the extended expansion was introduced by modifying the inlet cam for late closing of intake valve through Miller?s cycle for extended expansion. Through the extended expansion concept the actual work done increases, exhaust blow-down loss reduced and the thermal efficiency of the LHR engine is improved. In LHR engines, the formation of nitric oxide is more, to reduce the nitric oxide emission, the internal EGR is incorporated using modified exhaust cam with secondary lobe. Modifications of gas exchange with internal EGR resulted in decrease in nitric oxide emissions. In this work, the parametric studies were carried out both theoretically and experimentally. The combustion, performance and emission parameters were studied and were found to be satisfactory.

DEVELOPMENT OF THE COMBUSTION CHAMBER OF GAS ENGINE, CONVERTED ON THE BASIS OF DIESELS D-120 OR D-144 ENGINES TO WORK FOR ON LIQUEFIED PETROLEUM GAS

2019 ◽  
pp. 2-8
Author(s):  
Serhii Kovalov
Keyword(s):  
Combustion Chamber ◽  
Compression Ratio ◽  
Diesel Engines ◽  
Combustion Engine ◽  
Motor Fuel ◽  
Liquefied Petroleum Gas ◽  
Gas Engine ◽  
Chamber Volume ◽  
Motor Fuels ◽  
Dynamic Cycle

The expediency of using vehicles of liquefied petroleum gas as a motor fuel, as com-pared with traditional liquid motor fuels, in particular with diesel fuel, is shown. The advantages of converting diesel engines into gas ICEs with forced ignition with respect to conversion into gas diesel engines are substantiated. The analysis of methods for reducing the compression ratio in diesel engines when converting them into gas ICEs with forced ignition has been carried out. It is shown that for converting diesel engines into gas ICEs with forced ignition, it is advisable to use the Otto thermo-dynamic cycle with a decrease in the geometric degree of compression. The choice is grounded and an open combustion chamber in the form of an inverted axisymmetric “truncated cone” is developed. The proposed shape of the combustion chamber of a gas internal combustion engine for operation in the LPG reduces the geometric compression ratio of D-120 and D-144 diesel engines with an unseparated spherical combustion chamber, which reduces the geometric compression ratio from ε = 16,5 to ε = 9,4. The developed form of the combustion chamber allows the new diesel pistons or diesel pistons which are in operation to be in operation to be refined, instead of making special new gas pistons and to reduce the geometric compression ratio of diesel engines only by increasing the combustion chamber volume in the piston. This method of reducing the geometric degree of compression using conventional lathes is the most technologically advanced and cheap, as well as the least time consuming. Keywords: self-propelled chassis SSh-2540, wheeled tractors, diesel engines D-120 and D-144, gas engine with forced ignition, liquefied petroleum gas (LPG), compression ratio of the internal com-bustion engine, vehicles operating in the LPG.

scholarly journals INVESTIGATION ON THE PERFORMANCE OF FLAXSEED BIODIESEL BLENDS WITH TIO2 COATED PISTON ON A FOUR STROKE DI DIESEL ENGINE

2017 ◽  
Vol 46 (1) ◽  
pp. 49-53
Author(s):  
R. Bhaskar Reddy ◽  
S. Sunilkumar Reddy
Keyword(s):  
Combustion Chamber ◽  
Fuel Economy ◽  
Diesel Engines ◽  
Canola Oil ◽  
Alternative Fuels ◽  
Flaxseed Oil ◽  
Suitable Alternative ◽  
Petroleum Resources ◽  
Di Diesel Engine ◽  
Alternate Fuels

Diesel engines are being used extensively for fuel economy but due to gradual depletion of Petroleum resources and increase in exhaust emissions, there is an urgent need for suitable alternative fuels for the diesel engines. As our country is an agricultural country, if the alternate fuels are produced by our farmers it will be beneficial for the country and the farmers also. In recent studies, researchers studied various vegetable oils like canola oil, alovera oil, soya been oil, flaxseed oil and hone oil etc. Out of all flaxseed oil play an important role as an alternative fuel. But the properties of flaxseed oil are not suitable for the usage in the existing diesel engines without blending with diesel fuel. The performance of the engine depends on the combustion phenomenon and it further depends on the amount of heat retained in the combustion chamber. Hence the present work is planned accordingly to develop an insulated engine by coating the piston with TIO2material. So that more amount of heat will be retained in the combustion chamber which aids the combustion. Further the performance of flaxseedbiodiesel blend namely B10, B20, B30 and B40 are tested and the results are mentioned accordingly.

Investigation of Probable Combustion Chamber Configurations for High Output D.I. Diesel Engines

1992 ◽  
Author(s):  
Keh C. Tsao ◽  
Yu Dong ◽  
Yong Xu ◽  
D. Gruenwald ◽  
E. Phillips
Keyword(s):  
Combustion Chamber ◽  
Diesel Engines ◽  
High Output

scholarly journals EXPERIMENTAL ANALYSIS OF THE COMBUSTION CHAMBER COATED WITH Mo AND Al2O3-TiO2 IN A DIESEL ENGINE

2021 ◽  
Vol 55 (4) ◽  
Author(s):  
Murugan Kuppusamy ◽  
Thirumalai Ramanathan ◽  
Udhayakumar Krishnavel ◽  
Seenivasan Murugesan
Keyword(s):  
Combustion Chamber ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Performance Test ◽  
Ceramic Powder ◽  
Specific Fuel Consumption ◽  
Emission Characteristic ◽  
Powder Materials ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency

The effect of thermal-barrier coatings (TBCs) reduces fuel consumption, effectively improving the engine efficiency. This research focused on a TBC with a thickness of 300 µm insulating the combustion chamber of a direct ignition (DI) engine. The piston crown, inlet and exhaust-valve head were coated using air-plasma-spray coating. Ceramic powder materials such as molybdenum (Mo) and aluminum oxide titanium dioxide (Al2O3-TiO2) were used. A performance test of the engine with the coated combustion chamber was carried out to investigate the brake power, brake thermal efficiency, volumetric efficiency, brake specific fuel consumption and air-fuel ratio. Also, an emission-characteristic test was carried out to investigate the emissions of unburned hydrocarbon (HC), carbon monoxide (CO), nitrogen oxides (NO, NO2, NO3) and smoke opacity (SO). The results reveal that the brake thermal efficiency and brake specific fuel consumption show significant increases because of these coating materials. The effect of the Al2O3-TiO2 coating significantly reduces the HC and CO engine emissions.

What Are the Barriers Against Brake Thermal Efficiency beyond 55% for HD Diesel Engines?

2021 ◽  
Author(s):  
Kazumasa Watanabe ◽  
Noboru Uchida ◽  
Kazuhiro Yokogawa ◽  
Fumihiro Kawaharazuka
Keyword(s):  
Diesel Engines ◽  
Thermal Efficiency ◽  
Brake Thermal Efficiency
Sign in / Sign up

Export Citation Format

Share Document