Application of Set-Based Design Method to Ride Comfort Design with a Large Number of Design Parameters

2014 ◽  
Author(s):  
Mitsuru Enomoto ◽  
Michiko Kakinuma ◽  
Nobuhito Kato ◽  
Haruo Ishikawa ◽  
Yuichiro Hirose
Keyword(s):  
Ride Comfort ◽  
Design Method ◽  
Design Parameters ◽  
Set Based Design

scholarly journals Analysis and Optimisation of Ride Vibration of a Heavy-Duty Truck Based on a Vertical-Pitch-Roll Driver-Vehicle Coupled Dynamic Model

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Peng Guo ◽  
Jiewei Lin ◽  
Zefeng Lin ◽  
Jinlu Li ◽  
Chi Liu ◽  
...  
Keyword(s):  
Dynamic Model ◽  
Degrees Of Freedom ◽  
Ride Comfort ◽  
Design Method ◽  
Human Model ◽  
Design Parameters ◽  
Heavy Duty ◽  
Heavy Duty Truck ◽  
Heavy Duty Vehicle ◽  
Vehicle Dynamic Model

The ride comfort and the cargo safety are of great importance in the vibration design of heavy-duty vehicle. Traditional ride comfort design method based on the response of components of vehicles or interaction between human and seat overlooks the most direct criterion, the response of occupants, which makes the optimisation not targeted enough. It will be better to conduct the ride comfort design with the biodynamic response of driver. To this end, a 17-degrees-of-freedom (DOFs) vertical-pitch-roll vehicle dynamic model of a three-axle heavy-duty truck coupled with a 7 DOFs human model is developed. The ride comfort of human body under the vertical, the pitch, and the roll vibrations can be evaluated with the weighted root-mean-square (r.m.s.) acceleration of the driver in multiple directions. The flexibilities of chassis and carriage are also considered to improve the accuracy of the prediction of the ride comfort and to constrain the mounting optimisation of cab and carriage. After validation, the sensitivity analysis of the mounting system, the suspensions, and arrangement of sprung masses is carried out and significant factors to ride vibration are identified. The optimal combination of design parameters is obtained with the objective of minimizing the vibration of the driver and carriage simultaneously. The optimisation result shows that the weighted driver vibration is reduced by 27.9% and the carriage vibration is reduced by 31.8% at various speeds.

scholarly journals A modular design method based on TRIZ and AD and its application to cutter changing robot

2021 ◽  
Vol 13 (7) ◽  
pp. 168781402110343
Author(s):  
Mei Yang ◽  
Yimin Xia ◽  
Lianhui Jia ◽  
Dujuan Wang ◽  
Zhiyong Ji
Keyword(s):  
Modular Design ◽  
Design Method ◽  
Idea Generation ◽  
Design Parameters ◽  
Problem Analysis ◽  
Concept Design ◽  
Functional Requirements ◽  
Shield Tunneling ◽  
Structural Hierarchy ◽  
And Performance

Modular design, Axiomatic design (AD) and Theory of inventive problem solving (TRIZ) have been increasingly popularized in concept design of modern mechanical product. Each method has their own advantages and drawbacks. The benefit of modular design is reducing the product design period, and AD has the capability of problem analysis, while TRIZ’s expertise is innovative idea generation. According to the complementarity of these three approaches, an innovative and systematic methodology is proposed to design big complex mechanical system. Firstly, the module partition is executed based on scenario decomposition. Then, the behavior attributes of modules are listed to find the design contradiction, including motion form, spatial constraints, and performance requirements. TRIZ tools are employed to deal with the contradictions between behavior attributes. The decomposition and mapping of functional requirements and design parameters are carried out to construct the structural hierarchy of each module. Then, modules are integrated considering the connections between each other. Finally, the operation steps in application scenario are designed in temporal and spatial dimensions. Design of cutter changing robot for shield tunneling machine is taken as an example to validate the feasibility and effectiveness of the proposed method.

scholarly journals A Two-Round Optimization Design Method for Aerostatic Spindles Considering the Fluid–Structure Interaction Effect

2021 ◽  
Vol 11 (7) ◽  
pp. 3017
Author(s):  
Qiang Gao ◽  
Siyu Gao ◽  
Lihua Lu ◽  
Min Zhu ◽  
Feihu Zhang
Keyword(s):  
Optimal Design ◽  
Optimization Design ◽  
Design Method ◽  
Fluid Structure Interaction ◽  
Design Procedure ◽  
Design Parameters ◽  
Geometrical Parameters ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Aerostatic Spindle

The fluid–structure interaction (FSI) effect has a significant impact on the static and dynamic performance of aerostatic spindles, which should be fully considered when developing a new product. To enhance the overall performance of aerostatic spindles, a two-round optimization design method for aerostatic spindles considering the FSI effect is proposed in this article. An aerostatic spindle is optimized to elaborate the design procedure of the proposed method. In the first-round design, the geometrical parameters of the aerostatic bearing were optimized to improve its stiffness. Then, the key structural dimension of the aerostatic spindle is optimized in the second-round design to improve the natural frequency of the spindle. Finally, optimal design parameters are acquired and experimentally verified. This research guides the optimal design of aerostatic spindles considering the FSI effect.

Research on the Optimal Design Method of the Main Components for the Wheelchair Pickup

2013 ◽  
Vol 791-793 ◽  
pp. 799-802
Author(s):  
Ya Ping Wang ◽  
H.R. Shi ◽  
L. Gao ◽  
Z. Wang ◽  
X.Y. Jia ◽  
...  
Keyword(s):  
Parametric Design ◽  
Design Method ◽  
Basic Function ◽  
Design Parameters ◽  
Algorithm Optimization ◽  
Optimization Analysis ◽  
Research Designs ◽  
Optimal Design Method ◽  
Main Components

With the increasing of the aging of population all over the world, and With the inconvenience coming from diseases and damage, there will be more and more people using the wheelchair as a tool for transport. When it cant be short of the wheelchair in the daily life, the addition of the function will bring the elevation of the quality of life for the unfortunate. Staring with this purpose, the research designs a pickup with planetary bevel gear for the wheelchair. After determining the basic function of the wheelchair aids, the study determines the design parameters by using the knowledge of parametric design and completes the model for the system with Pro/E, on the other hand, it completes key components optimization analysis which is based on genetic algorithm optimization.

Development of High-Speed Response Electromagnetic Linear Actuator Using for Pneumatic Control Valve

2014 ◽  
Vol 532 ◽  
pp. 41-45 ◽  
Author(s):  
Myung Jin Chung
Keyword(s):  
Optimal Design ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Design Method ◽  
Control Valve ◽  
Design Parameters ◽  
Linear Actuator ◽  
Analytic Model ◽  
Electromagnetic Linear Actuator ◽  
Quadratic Programming Method

Analytic model of electromagnetic linear actuator in the function of electric and geometric parameters is proposed and the effects of the design parameters on the dynamic characteristics are analyzed. To improve the dynamic characteristics, optimal design is conducted by applying sequential quadratic programming method to the analytic model. This optimal design method aims to minimize the response time and maximize force efficiency. By this procedure, electromagnetic linear actuator having high-speed characteristics is developed.

The Biomimetic Shark Skin Optimization Design Method for Improving Lubrication Effect of Engineering Surface

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
Yan Lu ◽  
Meng Hua ◽  
Zuomin Liu
Keyword(s):  
Coefficient Of Friction ◽  
Optimization Design ◽  
Design Method ◽  
Theory Model ◽  
Tribological Performance ◽  
Design Parameters ◽  
Width Ratio ◽  
Textured Surface ◽  
Shark Skin ◽  
Biomimetic Surface

Nature has long been an important source of inspiration for mankind to develop artificial ways to mimic the remarkable properties of biological systems. In this work, a new method was explored to fabricate a biomimetic engineering surface comprising both the shark-skin, the shark body denticle, and rib morphology. It can help reduce water resistance and the friction contact area as well as accommodate lubricant. The lubrication theory model was established to predict the effect of geometric parameters of a biomimetic surface on tribological performance. The model has been proved to be feasible to predict tribological performance by the experimental results. The model was then used to investigate the effect of the grid textured surface on frictional performance of different geometries. The investigation was aimed at providing a rule for deriving the design parameters of a biomimetic surface with good lubrication characteristics. Results suggest that: (i) the increase in depression width ratio Λ decreases its corresponding coefficient of friction, and (ii) the small coefficient of friction is achievable when Λ is beyond 0.45. Superposition of depth ratio Γ and angle's couple under the condition of Λ < 0.45 affects the value of friction coefficient. It shows the decrease in angle decreases with the increase in dimension depth Γ.

Root cause analysis of rattle noise in twin-tube vehicle dampers

2021 ◽  
pp. 095440702110652
Author(s):  
Marian Sikora ◽  
Janusz Gołdasz
Keyword(s):  
Design Of Experiment ◽  
Ride Comfort ◽  
Design Parameters ◽  
Vehicle Suspension ◽  
Experiment Study ◽  
Cause Analysis ◽  
Root Cause ◽  
Main Effect ◽  
Definition Of ◽  
Insight Into

The aim of this work is to provide an insight into the rattle noise phenomena occurring in double-tube (twin-tube) vehicle suspension dampers. In the dampers the particular phenomenon results from interactions between the valve(s) and the fluid passing through them. The rattling noise phenomena is known to degrade the vehicle passenger’s perception of ride comfort as well as to influence the performance of the dampers at low and medium speeds in particular. In the paper the authors reveal the results of a DOE (Design of Experiment) study involving several design parameters known to affect rattling occurrence. By running a series of purpose-designed tests the authors investigate not only the contribution of each particular parameter but the interactions between them. The results are presented in the form of pareto charts, main effect plots as well as interaction plots. It is expected the outcome of the analysis will aid in a better comprehension of the phenomena as well the definition of valve configurations to minimize their performance degradation.

Nonrelative sliding of spiral bevel gear mechanism based on active design of meshing line

2018 ◽  
Vol 233 (3) ◽  
pp. 1055-1067 ◽  
Author(s):  
Zhen Chen ◽  
Ming Zeng
Keyword(s):  
Design Method ◽  
Bevel Gear ◽  
Transmission Mechanism ◽  
Tooth Surface ◽  
Design Parameters ◽  
Spiral Bevel Gear ◽  
Bevel Gears ◽  
Gear Mechanism ◽  
Active Design ◽  
Spiral Bevel

In this paper, an active design method of meshing line for a spiral bevel gear mechanism with nonrelative sliding is presented. First, the general meshing line equations for a nonrelative sliding transmission mechanism between two orthogonal axes are proposed based on the active design parameters. Then, parametric equations for contact curves on the drive and driven spiral bevel gears are deduced by coordinate transformation of the meshing line equations. Further to this, parametric equations for the tooth surface of each bevel gear are derived according to the conical spiral motion of a generatrix circle along the calculated contact curves. Finally, a set of numerical examples is presented based on two types of motion equation of the meshing points. Material prototypes are fabricated and experimentally tested to validate the kinematic performance of the functionally designed spiral bevel gear set.

Sign in / Sign up

Export Citation Format

Share Document