Utilization of Waste Vegetable Oil Methyl Ester for Diesel Fuel

Author(s):  
K. Hamasaki ◽  
H. Tajima ◽  
K. Takasaki ◽  
K. Satohira ◽  
M. Enomoto ◽  
...  
2002 ◽  
Vol 45 (3) ◽  
Author(s):  
M. P. Dorado ◽  
J. M. Arnal ◽  
J. Gómez ◽  
A. Gil ◽  
F. J. López

Author(s):  
Amarlo Banania ◽  
Edwin N. Quiros ◽  
Jose Gabriel E. Mercado

Abstract Continuous demand for energy in order to provide to an ever-increasing global population calls for use of or integration of other alternative sources of fuel other than fossil fuels. Many countries all over the world use vegetable oils blended with neat diesel as alternative and using these biofuels can help alleviate lessen the emissions releases on the environment as well as the country’s dependency on fossil fuels. In the Philippines Coconut Methyl Ester (CME) is the primary vegetable oil used, however in this study we used four other vegetable oils which are RCO (Refined Corn Oil), RPO (Refine Palm Oil), JFO (Jahtropa Filtered Oil) and JME (Jathropa Methyl Ester) in order to investigate the possibility of their use in diesel engines. A 6.3 kW single-cylinder, four stroke cycle, direct injection engine was used for the study. This kind of engine is typically used in the Philippines for different purposes such as backup power for households, for boats, pumps and for agriculture use. The specific fuel consumption of the biodiesel blends compared to neat diesel fuel ranged from −15% to 15% with RCO and JME having higher SFC and JFO and RPO having lower SFC. Fuel conversion efficiency of the varied from −12% to 12% with JFO and RPO having higher efficiency and RCO and JME having lower efficiency. The power of the varied from −7% to 6% with RPO having lower power output, JFO having higher power output and JME and RCO having similar power output to neat diesel fuel. At full load condasition Neat Diesel Fuel blended with 15% Refined Palm Oil showed the greatest improvement in SFC while Neat Diesel Fuel blended with 10% Jathropa Filtered Oil showed the best power output.


2015 ◽  
Vol 787 ◽  
pp. 761-765 ◽  
Author(s):  
M. Venkata Ramanan ◽  
D. Yuvarajan

Many studies have confirmed that the use of transesterifed vegetable oil as a fuel in diesel engine has resulted in lesser efficiency and inferior combustion rate when compared with petroleum diesel. Of late research works are being carried out to discover the surplus information on effective utilization of vegetable oil in CI engine as a promising alternative fuel. The present work was aimed to investigate the effect of preheating the transesterified oil just before entering fuel injection system thereby making its physical and chemical properties much closer to diesel fuel. In the present work neat mustard oil methyl ester was preheated to 90°c (MO90) and used in single cylinder, four stroke, naturally aspirated, direct injection compression ignition engine and compared with un heated mustard oil methyl ester (MO) at ambient temperature and petroleum diesel. The effects of fuel preheating on engine performance with mustard oil were clarified. Experiments were conducted with MO90 (Mustard oil methyl ester preheated to 90° C) and MO (Mustard oil methyl ester) and are compared with conventional diesel. The experimental analysis revealed that the BTE (brake thermal efficiency) of an engine was lower and BSFC (brake specific fuel consumption) was higher with unheated mustard oil methyl ester as compared to diesel fuel. However, increase in BTE and reduction in BSFC was observed with increase fuel inlet temperature of methyl ester to 90°C. Thus by preheating the mustard oil methyl ester during the fuel injection can be a good alternate fuel for CI engines in near future.


2020 ◽  
Vol 6 (1) ◽  
pp. 26
Author(s):  
Edwin Permana ◽  
M Naswir

Biodiesel is an alternative fuel that can be renewed and as a promising of diesel fuel in the future.  In this study, the production of biodiesel from used waste vegetable oil through the initial treatment reaction saponification and without saponification. The process of producing of biodiesel can used by the transesterification method. The yield of biodiesel were obtained then analysis for quantity by calculating of the percent yield on each yield for biodiesel with saponification successively is 61.68%. The biodiesel product without saponification successively is 81.93%. The quality test produced for biodiesel density test with and without saponification is 0.8871 g / mL and 0.8975 g / mL ,% FFA 0.3375 mg KOH / g and 0.6325 mg KOH / g, and flash point 184 ℃ and 182.6 ℃.


1981 ◽  
Author(s):  
Mary Kay Cardis Fishinger ◽  
Helmuth W. Engelman ◽  
Dennis A. Guenther

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 567-579 ◽  
Author(s):  
Akos Bereczky

Petroleum-based fuels are now widely known as environmentally unfriendly because of non-renewable supplies and its contribution to environmental pollution. The challenge, therefore is to ensure appropriate energy supplies at minimum cost. There is an increasing energy demand in the world and nowadays it can be fulfilled only on the basis of fossil fuels. Therefore, it is necessary to evolve a renewable energy source with lower environmental impact. One alternative solution can be oils of plant origin, like vegetable oils and non-edible oils. With waste vegetable oil methyl ester, biofuel dependency can be decreased. Therefore, the aim of this research paper is to analyze the economic and environmental effect of waste vegetable oil methyl ester compared to fossil fuels. In some cases only the age of vehicles could raise burdens to biofuel utilization in road vehicles. Transport and energy policy ? on a large scale ? can play an important role in fuel consumption. Author is aware that waste vegetable oil methyl ester can play only a limited role in biofuel substitution.


Sign in / Sign up

Export Citation Format

Share Document