GROWTH OF FOUR GRASS SPECIES AS AFFECTED BY RATE OF NITROGEN APPLICATION AND YEAR OF ESTABLISHMENT ON TWO SOIL TYPES

1985 ◽  
Vol 65 (3) ◽  
pp. 581-588 ◽  
Author(s):  
R. G. SIMONS ◽  
A. T. H. GROSS
Keyword(s):  
Sandy Loam ◽  
Forage Yield ◽  
Soil Types ◽  
Grass Species ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Crested Wheatgrass ◽  
Intermediate Wheatgrass ◽  
Loam Soil ◽  
Harvest Year

In an experiment to investigate the relationship between nitrogen fertilization and forage yield, four grass species, bromegrass (Bromus inermis Leyss.), intermediate wheatgrass (Agropyron intermedium (Host) Beauv.), crested wheatgrass (A. cristatum (L.) Gaertn.) and Russian wild ryegrass (Elymus junceus Fisch.), were sown in each of 3 yr on two soil types, a clay loam and a sandy loam. Five N treatments up to 252 kg N∙ha−1∙year−1 were imposed and data were collected for each of the 3 yr following the seeding year on each plot. There was considerable variation in the dry matter yields between seeding years and postseeding years. On the clay loam soil, the first year after seeding was generally the most productive whereas on the sandy loam the second harvest year produced the most. Intermediate wheatgrass was the most productive grass on the clay loam soil, crested wheatgrass on the sandy loam soil. Bromegrass produced well on both types while Russian wild ryegrass was the least productive on both soils. All species responded well to additional N. There was no advantage to split N application. The N content of forage was similar in all four species and on both soil types but was increased by fertilizer N.Key words: Bromegrass, wheatgrass, Russian wild ryegrass, nitrogen, forage yield, establishment year.

Effect of fertilizer placement on yield of established alfalfa stands

1995 ◽  
Vol 75 (4) ◽  
pp. 883-887 ◽  
Author(s):  
R. G. Simons ◽  
C. A. Grant ◽  
L. D. Bailey
Keyword(s):  
Sandy Loam ◽  
Fertilizer Application ◽  
Forage Yield ◽  
Yield Response ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Fine Sandy Loam ◽  
Loam Soil ◽  
Four Levels ◽  
K Fertilization

Alfalfa yield response to P and K fertilization management has been documented elsewhere, but little work has been done in western Canada. Field studies conducted on two Manitoba soils for 4 yr evaluated the effects of four levels of monoammonium phosphate and three levels of potassium chloride fertilizers, applied as a surface broadcast or as an in-soil band application, on the yield of established alfalfa (Medicago sativa L.) stands. Applied P increased total annual forage yield on the clay loam soil by 1.53 t h−1 (47%), when averaged over the 4 yr of the study, but did not increase yields on the fine sandy loam. Yield response to P application on the clay loam soil increased over the 4 yr of the study. Potassium application resulted in minor or no increases in forage yield on both soils. On the clay loam soil, there was no yield difference between banded and broadcast fertilizer applications. On the fine sandy loam soil, band application reduced yields slightly compared with broadcast application, particularly at the first harvest following fertilizer application. Grass ingress into the plots was reduced by K application but was not affected by P fertilization, which may indicate a beneficial effect of K fertilization on alfalfa vigor and persistence. Key words: Potassium, phosphorus, banding, broadcast, persistence

scholarly journals Suitability of Rice Transplanters and Weeders in Different Soil Types

2021 ◽  
pp. 103-113
Author(s):  
S. Vallal Kannan ◽  
A. Veeramani ◽  
M. Hemalatha ◽  
S. Elamathi ◽  
C. Umamageswari ◽  
...  
Keyword(s):  
Sandy Loam ◽  
Sandy Loam Soil ◽  
Soil Types ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Sandy Clay Loam ◽  
Net Return ◽  
Sandy Clay ◽  
Loam Soil ◽  
Field Efficiency

Aim: To evaluate the performance of existing models of rice transplanters in different soil types, to evaluate the performance of existing models of power weeder in different soil types, and to reduce the cost of cultivation and enhance the rice production and profitability. Study design: Strip plot design with different soil types as main-plot treatments(3),existing models of rice transplanter(5)  as sub-plot treatment and existing models of power weeder(3) as sub-sub-plot treatments. Place and duration: Experiments were conducted in six locations of delta zones  of Tamil Nadu representing three soil types’ viz., sandy clay loam, sandy loam, and clay loam during samba season(2019 & 2020) with  the medium duration rice variety ‘TKM 13. Methodology: Transplanter machine related parameters of actual field efficiency, theoretical capacity and field efficiency and  weeder  machine related parameters of field capacity and field efficiency and weed control efficiency was observed in different soil types. Suitability of transplanter and weeder combination on rice growth and yield parameters and yield, reduction of cost of cultivation and increase in net return and net income were observed and calculated. Results: Among growth and yield parameters, the 6 row yanmar transplanter along with conoweeding combination were recorded higher tillers and productive tillers (16.28 &20.65/hill), number of filled grains (113&145/panicle) seed yield (5922 &5733kg/ha) respectively in sandy clay loam and sandy loam soil.  Similarly, higher net return(Rs.70195/ha& Rs.55343/ha)) and BCR(2.62& BCR(2.28) in sandy clay loam  and  sandy loam soil respectively. Furthermore, they achieved additional grain yield of 1769 kg/ha and 1873 kg/ha with the additional net profit of Rs.37027/ha& Rs.34813/ha in sandy clay loam and sandy loam soil respectively. Yanmar 8 row transplanter along with single row power weeder combination were recorded higher productive tillers (15.25/hill), filled grains(122/panicle)  and seed yield (5506 kg/ha)  with higher net return (Rs.58175/ha) and BCR(2.32) in clay  loam soil. Furthermore, they achieved with an additional grain yield of 1121 kg/ha with additional net profit of Rs.24618/ha and net income change of Rs.24618/ha  in clay loam soil compared to farmers practice. Conclusion: Cultivation of rice by using 6 row yanmar transplanter and weeding by cono weeder along with agronomic practices is important to achieve higher yield performance and net return and BCR in sandy clay loam soil and sandy loam soil.  Cultivation of rice by using 8 row Yanmar transplanter for transplanting and single row power weeder for weeding operation along with recommended agronomic practices is important to achieve higher yield performance and net return and BCR in clay loam soil.

scholarly journals Nitrogen, Magnesium, and Boron Applications Affect Cauliflower Yield, Curd Mass, and Hollow Stem Disorder

HortScience ◽  
1997 ◽  
Vol 32 (1) ◽  
pp. 75-78 ◽  
Author(s):  
K.M. Batal ◽  
D.M. Granberry ◽  
B.G. Mullinix
Keyword(s):  
Brassica Oleracea ◽  
Sandy Loam ◽  
Sandy Loam Soil ◽  
Soil Types ◽  
Yield Response ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Loam Soil ◽  
Effect On Yield ◽  
N Rates

The effects of three rates of N, Mg, and B on cauliflower (Brassica oleracea, Botrytis group) yield, average curd mass, and hollow stem disorder were evaluated on sandy and clay loam soils. Cultivars White Empress and Stovepipe were tested on the sandy loam soil and `White Empress' was tested on the clay loam soil. Maximum mean curd mass and maximum yields were obtained with the highest N rates (269 and 381 kg·ha-1) applied to sandy loam and clay loam soils, respectively. Yield response to increased N rates varied with cultivar. Increasing Mg from 22.5 to 90 kg·ha-1 did not affect yield or curd mass on clay loam soil, but increased yield and mean curd mass on sandy loam soil. The Mg effect on curd mass was influenced by N and B rates. On both soil types, the higher Mg and B rates reduced the incidence of hollow stem, but the Mg effect was influenced by N applications. On clay loam soil, increasing B from 2.2 to 8.8 kg·ha-1 reduced hollow stem but had no effect on yield or curd mass. On sandy loam soil, B at 4.4 kg·ha-1 maximized yield and curd mass, but the hollow stem disorder continued to decrease as B rates were increased from 2.2 to 8.8 kg·ha-1.

TOLERANCE OF EARLY-MATURING SOYBEAN CULTIVARS TO METRIBUZIN

1986 ◽  
Vol 66 (1) ◽  
pp. 125-130 ◽  
Author(s):  
G. H. FRIESEN ◽  
D. A. WALL
Keyword(s):  
Sandy Loam ◽  
Controlled Environment ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Soybean Cultivars ◽  
Early Maturing ◽  
Glycine Max L ◽  
Loam Soil ◽  
Environment Chamber ◽  
Chamber Studies

McCall, Maple Presto, Maple Amber and OT80-3 soybean (Glycine max (L.) Merr.) cultivars were evaluated under field conditions for their response to metribuzin. Maple Amber was found to be less tolerant than the other cultivars. In controlled environment chamber studies, injury to this cultivar was more severe on a sandy loam soil than on a clay loam soil. Fall applications of metribuzin, alone or tank-mixed with trifluralin, were tolerant to Maple Amber soybeans and such applications may offer a practical alternative to spring treatments for broad spectrum weed control in the less tolerant soybean cultivars grown in Manitoba.Key words: Metribuzin, trifluralin, preplant incorporation, fall treatments, soybean cultivars

scholarly journals Biochar Improves Plant Growth and Reduces Nutrient Leaching in Red Clay Loam and Sandy Loam

2012 ◽  
pp. 86-90 ◽  
Author(s):  
Kalpana Pudasaini ◽  
Nanjappa Ashwath ◽  
Kerry Walsh ◽  
Thakur Bhattarai
Keyword(s):  
Sandy Loam ◽  
Vegetable Production ◽  
Clay Loam ◽  
Plant Establishment ◽  
Clay Loam Soil ◽  
Red Clay ◽  
Green Waste ◽  
Loam Soil ◽  
Shoot Weight ◽  
Water Holding

A factorial pot experiment was conducted using two types of soils (sandy loam and red clay loam) that are commonly used for commercial vegetable production in Bundaberg, region of Central Queensl and Australia. The soils were amended with 0, 25, 50 and 75 t/ha of green waste biochar and minimum doses of N, P and K (30 kg/ha, 30 kg/ha and 40 kg/ha respectively). After two weeks of plant establishment, the pots were leached with 1.5 litres of deionised water at week intervals, and cation concentrations of the leachate were determined. In 25 t/ha biochar treatment, there was a significant (P<0.05) reduction in K and Ca leaching by 40% and 26% respectively from sandy loam, and of Ca by 23% from the red clay loam. Soil water holding capacity and soil organic carbon were also increased in both biochar treated soils. After 12 weeks of growth, shoot weight was signifi cantly (P<0.05) higher in 25 t/ha biochar-treated sandy loam and red clay loam (32% and 31% respectively). These results clearly demonstrated that a higher yield of capsicum can be achieved from green waste biochar application in sandy loam and red clay loam at 25 t/ha biochar.DOI: http://dx.doi.org/10.3126/hn.v11i1.7221 Hydro Nepal Special Issue: Conference Proceedings 2012 pp.86-90

scholarly journals Effect of growing media on mat type seedling raised for mechanical rice transplanting 

2018 ◽  
Vol 64 (No. 3) ◽  
pp. 157-167
Author(s):  
Hossen Anwar M ◽  
Hossain Mosharraf M ◽  
Haque Enamul M ◽  
Bell Richard W
Keyword(s):  
Rice Straw ◽  
Rice Bran ◽  
Sandy Loam ◽  
Organic Fertilizer ◽  
Poultry Litter ◽  
Cow Dung ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Loam Soil ◽  
Rolling Quality

Mechanical transplanted seedling must meet the requirements of standard seedling block with uniform distribution of seedlings and inter-twisting roots for rolling. This study was conducted to identify the effect of growing media on mat type seedling raised for mechanical transplanting at Bangladesh Rice Research Institute (BRRI), Gazipur during the period of 2012–2014 covering two dry and cold seasons (Boro) and one wet season (Aman). Seedling were raised on plastic tray using sandy loam and clay loam soil mixed with decomposed cow-dung, mustard cake, rice straw organic fertilizer, rice bran, poultry litter and vermicompost at the rate of 0.0, 10, 20, 30 and 40%. Rolling quality of the seedling mat decreased and seedling height increased with the increased of mixing rate of organic fertilizer except rice bran and mustard cake. Averaged across three seasons, 10 to 30% cow-dung, rice straw organic fertilizer, vermicompost, 10% poultry litter and 20 to 30% rice bran with both types of soil was found suitable for seedling mat and seedling height. However, seedling varied among the organic fertilizers with both types of soil in the order of cow-dung &gt; rice bran &gt; vermicompost &gt; poultry liter &gt; rice straw organic fertilizer &gt; mustard cake. Clay loam soil showed better performance on rolling quality over sandy loam soil.

scholarly journals Influence of wood-derived biochar on the physico-mechanical and chemical characteristics of agricultural soils

2018 ◽  
Vol 32 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Ahmed S.F. Ahmed ◽  
Vijaya Raghavan
Keyword(s):  
Agricultural Soils ◽  
Sandy Loam ◽  
Chemical Properties ◽  
Dry Weight ◽  
Crop Productivity ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Loam Soil ◽  
Specific Influence ◽  
And Chemical Properties

AbstractAmendment of soil with biochar has been shown to enhance fertility and increase crop productivity, but the specific influence of biochar on soil workability remains unclear. Select physico-mechanical and chemical properties of clay loam and sandy loam soils were measured after amendment with wood-derived biochar of two particle size ranges (0.5-425 and 425-850 µm) at five dosages ranging from 0.5 to 10% dry weight. Whereas the clay loam soil workability decreased when the finer wood-derived biochar was applied at rates of 6 or 10%, soil fertility was not enhanced. The sandy loam soil, due to Proctor compaction, significantly decreased in bulk density with 6 and 10% wood-derived biochar amendments indicating higher soil resistance to compaction.

scholarly journals Carrot Yield and Shape Altered by Seeding Rate and Raised Beds in Clay-loam Soil

HortScience ◽  
2021 ◽  
pp. 1-8
Author(s):  
Charlie L. Rohwer
Keyword(s):  
Sandy Loam ◽  
Specific Yield ◽  
Clay Loam ◽  
Seeding Rate ◽  
Clay Loam Soil ◽  
Soil Penetration Resistance ◽  
Heavy Soil ◽  
Loam Soil ◽  
Raised Bed ◽  
Plot Design

Carrots (Daucus carota L. var sativus) in the midwestern United States are generally raised commercially on sandy-loam or muck soils. Some smaller growers may not have the luxury of an ideal soil type, so raised beds are often recommended to improve taproot growth. To determine specific yield and shape responses of carrots to raised-bed culture in heavy soil, three hybrids (‘Cupar’, ‘Envy’, and ‘Naval’) were grown in 2019 and 2020 on raised or flat beds in clay-loam soil. In addition, two seeding rates (high or low) were incorporated into the split-split plot design. ‘Cupar’ was larger and less misshapen than the other hybrids, but total marketable yields were similar among all three. ‘Naval’ was the most cylindrical. High seeding rate generally resulted in more numerous but smaller marketable roots and no change in total marketable weight. Raised beds caused a 10.6% increase in total marketable weight by allowing more marketable roots classified as “short” (between 76 and 127 mm long, diameter >25 mm) to grow to lengths more than 127 mm long. The average taproot cylindricity was increased and diameter decreased by growing on raised beds. Soil penetration resistance at 7.6 cm was correlated with many of the measured responses.

Performance Evaluation of Surface Overlaid EN-42 Steel for Tillage Applications

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Jagseer Singh ◽  
Sukhpal Singh Chatha ◽  
Buta Singh Sidhu
Keyword(s):  
Weight Loss ◽  
Wear Rate ◽  
Moisture Content ◽  
Sandy Loam ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Wear Performance ◽  
Sandy Clay Loam ◽  
Actual Field ◽  
Loam Soil

Abstract Wear of tools is a key problem in the farming sector. The objective of this study was to evaluate the wear performance of untreated steel (EN-42) and two hardfacings, namely H1 and VB. Hardfacing H1 (0.86Cr0.22C) fall in the basic buildup iron–carbide alloy category and hardfacing VB (3.19Cr2.51C2.7Si) is categorized as martensitic alloy steel. Abrasive wear performance of untreated, as well as hardfaced steel specimens, was evaluated in the laboratory and actual field conditions. The tests were conducted in the laboratory, and actual field trials were conducted in sandy loam and sandy clay-loam soil. The performance of the untreated and hardfaced steel was analyzed using various techniques such as weight loss, microhardness, microstructure and scanning electron microscopy (SEM). The results revealed that H1 and VB overlaid steel exhibited better wear performance than the untreated steel, and the least wear-rate was found in sandy clay-loam soil. VB overlaid steel experienced lesser cumulative weight loss (g) and wear-rate (g/km) and thus displayed better abrasive wear behavior under all the conditions of the study. Further, it has been observed that the moisture content in soil exerts a stronger effect on ploughshare wear than soil type. For actual field conditions, untreated and overlaid ploughshares tested in sandy loam soil with low moisture content (0–3%) experienced almost three times higher wear-rate (4.078 g/km, 3.699 g/km, and 3.055 g/km for untreated, H1, and VB overlaid steel, respectively) than the same ploughshares tested in soil having high (14–17%) moisture content (1.296 g/km, 1.178 g/km, and 0.913 g/km for untreated, H1, and VB overlaid steel, respectively).

Sign in / Sign up

Export Citation Format

Share Document