Performance Evaluation of Surface Overlaid EN-42 Steel for Tillage Applications

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Jagseer Singh ◽  
Sukhpal Singh Chatha ◽  
Buta Singh Sidhu
Keyword(s):  
Weight Loss ◽  
Wear Rate ◽  
Moisture Content ◽  
Sandy Loam ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Wear Performance ◽  
Sandy Clay Loam ◽  
Actual Field ◽  
Loam Soil

Abstract Wear of tools is a key problem in the farming sector. The objective of this study was to evaluate the wear performance of untreated steel (EN-42) and two hardfacings, namely H1 and VB. Hardfacing H1 (0.86Cr0.22C) fall in the basic buildup iron–carbide alloy category and hardfacing VB (3.19Cr2.51C2.7Si) is categorized as martensitic alloy steel. Abrasive wear performance of untreated, as well as hardfaced steel specimens, was evaluated in the laboratory and actual field conditions. The tests were conducted in the laboratory, and actual field trials were conducted in sandy loam and sandy clay-loam soil. The performance of the untreated and hardfaced steel was analyzed using various techniques such as weight loss, microhardness, microstructure and scanning electron microscopy (SEM). The results revealed that H1 and VB overlaid steel exhibited better wear performance than the untreated steel, and the least wear-rate was found in sandy clay-loam soil. VB overlaid steel experienced lesser cumulative weight loss (g) and wear-rate (g/km) and thus displayed better abrasive wear behavior under all the conditions of the study. Further, it has been observed that the moisture content in soil exerts a stronger effect on ploughshare wear than soil type. For actual field conditions, untreated and overlaid ploughshares tested in sandy loam soil with low moisture content (0–3%) experienced almost three times higher wear-rate (4.078 g/km, 3.699 g/km, and 3.055 g/km for untreated, H1, and VB overlaid steel, respectively) than the same ploughshares tested in soil having high (14–17%) moisture content (1.296 g/km, 1.178 g/km, and 0.913 g/km for untreated, H1, and VB overlaid steel, respectively).

Persistence of Preemergence Applications of Chlorsulfuron, Metsulfuron, Triasulfuron, and Tribenuron in Three Soils in Greece

Weed Science ◽  
1993 ◽  
Vol 41 (2) ◽  
pp. 246-250 ◽  
Author(s):  
Eleni Kotoula-Syka ◽  
Ilias G. Eleftherohorinos ◽  
Athanasios A. Gagianas ◽  
Achilleas G. Sficas
Keyword(s):  
Sandy Loam ◽  
Residual Activity ◽  
Silty Clay ◽  
Clay Loam ◽  
Herbicide Application ◽  
Clay Loam Soil ◽  
Silty Clay Loam ◽  
Sandy Clay Loam ◽  
Sandy Clay ◽  
Loam Soil

A pot bioassay, based on root growth of pregerminated corn, was used to evaluate factors influencing field persistence of chlorsulfuron, metsulfuron, triasulfuron, and tribenuron, which were applied preemergence at 0, 10, 20, and 40 g ai ha−1to wheat grown in three soils that differed in texture (sandy loam, sandy clay loam, and silty clay loam) and pH (7.9, 4.7, and 7.6). Residual activity and leaching of all herbicides in all soils increased with increasing rate of application, with the exception of tribenuron which showed practically no residual activity and leaching in sandy clay loam soil. Sunflower sown 4 mo after tribenuron application in all soils was not injured by any rate used but was significantly affected by the other herbicides. Lentil and sugarbeet also were affected by all herbicides in all soils. These three crops sown 8 mo after herbicide application were not affected by any herbicide used in the sandy clay loam soil but were injured by chlorsulfuron, triasulfuron, and metsulfuron in the sandy loam soil. Only lentil and sugarbeet were injured by chlorsulfuron in the silty clay loam soil.

scholarly journals Suitability of Rice Transplanters and Weeders in Different Soil Types

2021 ◽  
pp. 103-113
Author(s):  
S. Vallal Kannan ◽  
A. Veeramani ◽  
M. Hemalatha ◽  
S. Elamathi ◽  
C. Umamageswari ◽  
...  
Keyword(s):  
Sandy Loam ◽  
Sandy Loam Soil ◽  
Soil Types ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Sandy Clay Loam ◽  
Net Return ◽  
Sandy Clay ◽  
Loam Soil ◽  
Field Efficiency

Aim: To evaluate the performance of existing models of rice transplanters in different soil types, to evaluate the performance of existing models of power weeder in different soil types, and to reduce the cost of cultivation and enhance the rice production and profitability. Study design: Strip plot design with different soil types as main-plot treatments(3),existing models of rice transplanter(5)  as sub-plot treatment and existing models of power weeder(3) as sub-sub-plot treatments. Place and duration: Experiments were conducted in six locations of delta zones  of Tamil Nadu representing three soil types’ viz., sandy clay loam, sandy loam, and clay loam during samba season(2019 & 2020) with  the medium duration rice variety ‘TKM 13. Methodology: Transplanter machine related parameters of actual field efficiency, theoretical capacity and field efficiency and  weeder  machine related parameters of field capacity and field efficiency and weed control efficiency was observed in different soil types. Suitability of transplanter and weeder combination on rice growth and yield parameters and yield, reduction of cost of cultivation and increase in net return and net income were observed and calculated. Results: Among growth and yield parameters, the 6 row yanmar transplanter along with conoweeding combination were recorded higher tillers and productive tillers (16.28 &20.65/hill), number of filled grains (113&145/panicle) seed yield (5922 &5733kg/ha) respectively in sandy clay loam and sandy loam soil.  Similarly, higher net return(Rs.70195/ha& Rs.55343/ha)) and BCR(2.62& BCR(2.28) in sandy clay loam  and  sandy loam soil respectively. Furthermore, they achieved additional grain yield of 1769 kg/ha and 1873 kg/ha with the additional net profit of Rs.37027/ha& Rs.34813/ha in sandy clay loam and sandy loam soil respectively. Yanmar 8 row transplanter along with single row power weeder combination were recorded higher productive tillers (15.25/hill), filled grains(122/panicle)  and seed yield (5506 kg/ha)  with higher net return (Rs.58175/ha) and BCR(2.32) in clay  loam soil. Furthermore, they achieved with an additional grain yield of 1121 kg/ha with additional net profit of Rs.24618/ha and net income change of Rs.24618/ha  in clay loam soil compared to farmers practice. Conclusion: Cultivation of rice by using 6 row yanmar transplanter and weeding by cono weeder along with agronomic practices is important to achieve higher yield performance and net return and BCR in sandy clay loam soil and sandy loam soil.  Cultivation of rice by using 8 row Yanmar transplanter for transplanting and single row power weeder for weeding operation along with recommended agronomic practices is important to achieve higher yield performance and net return and BCR in clay loam soil.

Degradation of oxyfluorfen in sandy clay loam soil

2020 ◽  
Vol 8 (6) ◽  
pp. 1038-1041
Author(s):  
C Bharathi ◽  
P Murali Arthanari ◽  
C Chinnusamy
Keyword(s):  
Clay Loam ◽  
Clay Loam Soil ◽  
Sandy Clay Loam ◽  
Sandy Clay ◽  
Loam Soil

Managing organic carbon of sandy clay loam soil with organic amendments to promote particle aggregation

2021 ◽  
Vol 14 (4) ◽  
Author(s):  
Haroon Shahzad ◽  
Muhammad Iqbal ◽  
Noman Latif ◽  
Muhammad Arshad Khan ◽  
Qudrat Ullah Khan
Keyword(s):  
Organic Carbon ◽  
Organic Amendments ◽  
Particle Aggregation ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Sandy Clay Loam ◽  
Sandy Clay ◽  
Loam Soil

TOLERANCE OF EARLY-MATURING SOYBEAN CULTIVARS TO METRIBUZIN

1986 ◽  
Vol 66 (1) ◽  
pp. 125-130 ◽  
Author(s):  
G. H. FRIESEN ◽  
D. A. WALL
Keyword(s):  
Sandy Loam ◽  
Controlled Environment ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Soybean Cultivars ◽  
Early Maturing ◽  
Glycine Max L ◽  
Loam Soil ◽  
Environment Chamber ◽  
Chamber Studies

McCall, Maple Presto, Maple Amber and OT80-3 soybean (Glycine max (L.) Merr.) cultivars were evaluated under field conditions for their response to metribuzin. Maple Amber was found to be less tolerant than the other cultivars. In controlled environment chamber studies, injury to this cultivar was more severe on a sandy loam soil than on a clay loam soil. Fall applications of metribuzin, alone or tank-mixed with trifluralin, were tolerant to Maple Amber soybeans and such applications may offer a practical alternative to spring treatments for broad spectrum weed control in the less tolerant soybean cultivars grown in Manitoba.Key words: Metribuzin, trifluralin, preplant incorporation, fall treatments, soybean cultivars

scholarly journals Biochar Improves Plant Growth and Reduces Nutrient Leaching in Red Clay Loam and Sandy Loam

2012 ◽  
pp. 86-90 ◽  
Author(s):  
Kalpana Pudasaini ◽  
Nanjappa Ashwath ◽  
Kerry Walsh ◽  
Thakur Bhattarai
Keyword(s):  
Sandy Loam ◽  
Vegetable Production ◽  
Clay Loam ◽  
Plant Establishment ◽  
Clay Loam Soil ◽  
Red Clay ◽  
Green Waste ◽  
Loam Soil ◽  
Shoot Weight ◽  
Water Holding

A factorial pot experiment was conducted using two types of soils (sandy loam and red clay loam) that are commonly used for commercial vegetable production in Bundaberg, region of Central Queensl and Australia. The soils were amended with 0, 25, 50 and 75 t/ha of green waste biochar and minimum doses of N, P and K (30 kg/ha, 30 kg/ha and 40 kg/ha respectively). After two weeks of plant establishment, the pots were leached with 1.5 litres of deionised water at week intervals, and cation concentrations of the leachate were determined. In 25 t/ha biochar treatment, there was a significant (P<0.05) reduction in K and Ca leaching by 40% and 26% respectively from sandy loam, and of Ca by 23% from the red clay loam. Soil water holding capacity and soil organic carbon were also increased in both biochar treated soils. After 12 weeks of growth, shoot weight was signifi cantly (P<0.05) higher in 25 t/ha biochar-treated sandy loam and red clay loam (32% and 31% respectively). These results clearly demonstrated that a higher yield of capsicum can be achieved from green waste biochar application in sandy loam and red clay loam at 25 t/ha biochar.DOI: http://dx.doi.org/10.3126/hn.v11i1.7221 Hydro Nepal Special Issue: Conference Proceedings 2012 pp.86-90

scholarly journals Modeling phosphorus distribution under different fertigation strategies in onion (Allium cepa L.) crop

2017 ◽  
Vol 9 (2) ◽  
pp. 720-729
Author(s):  
Sanjay T. Satpute ◽  
Man Singh
Keyword(s):  
Soil Moisture ◽  
Nutrient Dynamics ◽  
Moisture Distribution ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Nutrient Distribution ◽  
Sandy Clay Loam ◽  
Phosphorus Distribution ◽  
Sandy Clay ◽  
Loam Soil

The understanding of soil and nutrient dynamics under drip fertigation is relevant for crop production as well as water and nutrient management. The aim of this study was to generate information about the distribution of phosphorus (P) under different fertigation strategies for onion production on sandy clay loam soil during 2007-2008 to 2008-2009. The study involved field experiment, laboratory analysis and modeling of P distribution. The phosphorus distribution data in the field were collected, analyzed and used to calibrate and validate the solute transport model HYDRUS-2D for sandy clay loam soil. The performance of HYDRUS-2D was evaluated by comparing its simulated values with the observed values of soil moisture and nutrient concentration. The coefficient of determination (R2), root mean square error (RMSE) and mean absolute error (MAE) were used as model performance indicators. The range of R2 between 0.72-0.99 for water as well as nutrient distribution indicates good correlation between the observed and simulated values. The MAE and RMSE values for water and nutrient distribution were in between 0.0009 to 0.0039 which indicated the accuracy of the model. From these results, it can be concluded that the model is performing well for predicting the P concentration in the soil as well as the soil moisture distribution for onion crop grown under sandy clay loam. The model was also validated for water and phosphorus distribution with the observed values at the end of the crop season and found to be performing well. The HYDRUS-2D model may be used to carry out simulations for different soil types and with different fertigation and irrigation strategies for developing guidelines.

Modelling soil water dynamics and crop water use in a soybean-wheat rotation under chisel tillage in a sandy clay loam soil

Geoderma ◽  
2018 ◽  
Vol 327 ◽  
pp. 13-24 ◽  
Author(s):  
Mukhtar Ahmad ◽  
Debashis Chakraborty ◽  
Pramila Aggarwal ◽  
Ranjan Bhattacharyya ◽  
Ravender Singh
Keyword(s):  
Soil Water ◽  
Water Use ◽  
Water Dynamics ◽  
Clay Loam ◽  
Crop Water ◽  
Soil Water Dynamics ◽  
Clay Loam Soil ◽  
Sandy Clay Loam ◽  
Crop Water Use ◽  
Loam Soil
Sign in / Sign up

Export Citation Format

Share Document