scholarly journals Removal of Cd(II) Ions from Simulated Wastewater by HCl Modified Cucumis sativus Peel: Equilibrium and Kinetic Study

2014 ◽  
Vol 7 ◽  
pp. ASWR.S16488 ◽  
Author(s):  
Ruchi Pandey ◽  
Nasreen Ghazi Ansari ◽  
Ram Lakhan Prasad ◽  
Ramesh Chandra Murthy
Keyword(s):  
Cucumis Sativus ◽  
Adsorption Process ◽  
Order Reaction ◽  
Ion Concentration ◽  
Second Order Reaction ◽  
Monolayer Adsorption ◽  
Optimum Ph ◽  
Pseudo Second Order ◽  
Simulated Wastewater ◽  
Maximum Removal

This paper describes the adsorption of Cd(II) ions from aqueous solutions by modified Cucumis sativus peel (CSP) by HCl treatment. The optimum pH, adsorbent mass, contact time, and initial ion concentration were determined. The maximum removal efficiency was 84.85% for 20 mg/L Cd(II) ion at pH 5. The adsorption isotherms were obtained using concentrations of the metal ions ranging from 5 to 150 mg/L. The adsorption process follows Langmuir isotherm and pseudo-second-order reaction kinetics. CSPs exhibit monolayer adsorption capacity of 58.14 mg/g at 298 K. The paper also discusses the thermodynamic parameters of the adsorption (the Gibbs free energy, entropy, and enthalpy). Our results establish that the adsorption process was spontaneous and endothermic under normal conditions.

scholarly journals Performance of natural and modified smectite: kinetic and thermodynamics involving arsenic (V) adsorption

Cerâmica ◽  
2010 ◽  
Vol 56 (337) ◽  
pp. 49-56 ◽  
Author(s):  
D. L Guerra ◽  
C Airoldi ◽  
R. R Viana
Keyword(s):  
Room Temperature ◽  
Adsorption Process ◽  
Textural Analysis ◽  
Order Reaction ◽  
29Si Mas Nmr ◽  
Second Order Reaction ◽  
Calorimetric Titration ◽  
Pseudo Second Order ◽  
Solid Liquid Interface ◽  
Solid Liquid

A natural smectite sample has been modified by organofunctionalization process using synthetic route involved the reaction of 2-mercaptopyrimidine with 3-chloropropyltriethoxysilane. The resulting material (S MPY) was characterized by SEM, FTIR, textural analysis and 29Si MAS-NMR. The ability of this material to removed As (V) from aqueous solution was followed by series of adsorption isotherms adjusted to the Langmuir equation at room temperature and pH 2.0. The kinetic parameters analyzed by Lagergren and Elovich models gave a good fit for a pseudo-second order reaction with k2 in the 4.9 to 14.0 mmol-1 min-1 range for S MPY. The adsorption process was exothermic (ΔintH = -4.09 to -5.79 kJ.mol-1) accompanied by increase in entropy (ΔintS = 41.29 to 61.80 JK-1.mol-1) and Gibbs energy (ΔintG = -22.34 to -24.19 kJmol-1). The energetic effect caused by arsenic cation adsorption was determined through calorimetric titration at the solid-liquid interface and gave a net thermal effect that enabled the calculation of the exothermic values and the equilibrium constant.

scholarly journals Sequestration of Pb(II) and Ni(II) ions from aqueous solution using microalga Rhizoclonium hookeri: adsorption thermodynamics, kinetics, and equilibrium studies

2016 ◽  
Vol 7 (2) ◽  
pp. 214-227 ◽  
Author(s):  
S. Suganya ◽  
A. Saravanan ◽  
P. Senthil Kumar ◽  
M. Yashwanthraj ◽  
P. Sundar Rajan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Adsorption Process ◽  
Second Order ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Equilibrium Studies ◽  
Adsorption Mode ◽  
Monolayer Adsorption ◽  
Pseudo Second Order

In the present study, the microalga Rhizoclonium hookeri (RH) was effectively applied to remove the metal ions [Pb(II) and Ni(II)] from aqueous solution in batch adsorption mode experiments. The adsorption process was influenced by several operating parameters such as initial metal ion concentration, contact time, pH, particle size, adsorbent dose, and temperature. The maximum monolayer adsorption capacity of the RH was found to be 81.7 mg g−1 and 65.81 mg g−1 for Pb(II) and Ni(II) ions, respectively, at optimum conditions. The calculated thermodynamic parameters illustrated that the adsorption process was found to be spontaneous and endothermic in nature. Experimental data were analyzed in terms of pseudo-first order, pseudo-second order, and Elovich kinetic models. The results showed that the removal of Pb(II) and Ni(II) ions followed the pseudo-second order kinetics. The adsorption isotherm data were described using two and three parameter models. The results indicate that the adsorption data were best fitted with the Sips isotherm model. Consequently, the microalga RH with good adsorbability and reusability could be used as an effective adsorbent for the adsorption of Pb(II) and Ni(II) ions from wastewater.

scholarly journals Eggshell Powder as an Adsorbent for Removal of Fluoride from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Studies

2012 ◽  
Vol 9 (3) ◽  
pp. 1457-1480 ◽  
Author(s):  
R. Bhaumik ◽  
N. K. Mondal ◽  
B. Das ◽  
P. Roy ◽  
K. C. Pal ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Fluoride Removal ◽  
Contaminated Water ◽  
Fluoride Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Maximum Removal

A new medium, eggshell powder has been developed for fluoride removal from aqueous solution. Fluoride adsorption was studied in a batch system where adsorption was found to be pH dependent with maximum removal efficiency at 6.0. The experimental data was more satisfactorily fitted with Langmuir isotherm model. The kinetics and the factor controlling adsorption process fully accepted by pseudo-second-order model were also discussed. Eawas found to be 45.98 kJmol-1by using Arrhenius equation, indicating chemisorption nature of fluoride onto eggshell powder. Thermodynamic study showed spontaneous nature and feasibility of the adsorption process with negative enthalpy (∆H0) value also supported the exothermic nature. Batch experiments were performed to study the applicability of the adsorbent by using fluoride contaminated water collected from affected areas. These results indicate that eggshell powder can be used as an effective, low-cost adsorbent to remove fluoride from aqueous solution as well as groundwater.

scholarly journals Removal of toxic metals from aqueous solution by biochars derived from long-root Eichhornia crassipes

2018 ◽  
Vol 5 (10) ◽  
pp. 180966 ◽  
Author(s):  
Qiang Li ◽  
Lizhou Tang ◽  
Jiang Hu ◽  
Ming Jiang ◽  
Xiaodong Shi ◽  
...  
Keyword(s):  
Toxic Metals ◽  
Eichhornia Crassipes ◽  
Adsorption Process ◽  
Correlation Coefficients ◽  
Sorption Ability ◽  
Different Temperatures ◽  
Lead Zinc ◽  
Pseudo Second Order ◽  
Cyano Groups ◽  
Maximum Removal

Biochars were produced from long-root Eichhornia crassipes at four temperatures: 200, 300, 400 and 500°C, referred to as LEC200, LEC300, LEC400 and LEC500, respectively. The sorption ability of lead, zinc, copper and cadmium from aqueous solutions by four kinds of biochars was investigated. All the biochars had lower values of CEC and higher values of pH. LEC500 was the best one to bind toxic metals which can be reflected in the results of SEM, BET and elemental analyser. It was also found that alkyl, carboxyl, phosphate and cyano groups in the biochars can play a role in binding metals. In addition, the sorption processes of four metals by the biochars in different metal concentration were all excellently represented by the pseudo-second-order model with all correlation coefficients R 2 > 0.95. And the sorption processes of four metals in different temperatures could be described satisfactorily by the Langmuir isotherms. According to calculated results by the Langmuir equation, the maximum removal capacities of Pb(II), Zn(II), Cu(II) and Cd(II) at 298 K were 39.09 mg g −1 , 45.40 mg g −1 , 48.20 mg g −1 and 44.04 mg g −1 , respectively. The positive value of the Δ H 0 confirmed the adsorption process was endothermic and the negative value of Δ G 0 confirmed the adsorption process was spontaneous. The sorption capacities were compared with several other lignocellulosic materials which implied the potential of long-root Eichhornia crassipes waste as an economic and excellent biosorbent for eliminating metal ions from contaminated waters.

scholarly journals Reuse of Newspaper As An Adsorbent For Cu (II) Removal By Citric Acid Modification

2018 ◽  
Vol 156 ◽  
pp. 02012 ◽  
Author(s):  
Mardiah ◽  
Rif’an Fathoni ◽  
Pratiwi Pudyaningtyas ◽  
Hamdania Gamu ◽  
Rinaldy
Keyword(s):  
Citric Acid ◽  
Adsorption Process ◽  
Kinetic Studies ◽  
Order Reaction ◽  
Acid Modification ◽  
Pseudo First Order Reaction ◽  
First Order ◽  
Pseudo Second Order ◽  
Heavy Metal Adsorbent ◽  
The Impact

High Consumption of paper, bring the impact of the waste paper itself. And the utilization of the paper is limited to recycled products and crafts, whereas paper such as newspaper still contains cellulose that can be potential to be used as a heavy metal adsorbent. In this study, newspaper was dissolved in sodium bicarbonate to reduce various impurities and then was reacted with citric acid (CA). The modified adsorbent was characterized by FTIR and was tested for adsorb Cu(II) in artificial solution. After adsorption process, the solution was filtered and analysed using Atomic Absorption Spectrophotometer (AAS). The adsorption experimental data was fitted to Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich for equilibrium model and was fitted to pseudo first order reaction and pseudo second order reaction for kinetic studies. The result showed that CA-modification newspaper able to remove heavy metals Cu(II) in solution.

scholarly journals Water defluoridation by alumina modified Turkey clinoptilolite: equilibrium, kinetic models and experimental design approaches

2017 ◽  
Vol 18 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Selim Selimoglu ◽  
Esra Bilgin Simsek ◽  
Ulker Beker
Keyword(s):  
Natural Zeolite ◽  
Kinetic Studies ◽  
Order Reaction ◽  
Operating Conditions ◽  
Second Order Reaction ◽  
Freundlich Model ◽  
Box Behnken Design ◽  
Fluoride Adsorption ◽  
Exothermic Process ◽  
Pseudo Second Order

Abstract In the current work, alumina modified natural zeolite (Z-Al) was used for fluoride adsorption in aqueous solution. Effects of process parameters such as pH, temperature, initial concentration and contact time were investigated. Box–Behnken design was found effective in defining the operating conditions for fluoride sorption onto Z-Al. Confirmatory experiments were conducted to examine the reliability of the regression equation. The predicted (2.261 mg g−1) and experimental (2.289 mg g−1) capacities were found to be similar, demonstrating the accuracy of the model. The fluoride adsorption onto Z-Al was well described by the Freundlich model. Kinetic studies revealed that the adsorption followed a pseudo-second-order reaction. Thermodynamic parameters depicted that the fluoride adsorption on the alumina modified zeolite was a spontaneous and exothermic process. The co-existing ions affected the defluoridation performance significantly. Regeneration of exhausted Z-Al was achieved with H2SO4.

Study on the Kinetics of Adsorption of Cadmium by Chitosan

2010 ◽  
Vol 160-162 ◽  
pp. 1804-1809
Author(s):  
Qiang Bi ◽  
Juan Qin Xue ◽  
Ying Juan Guo ◽  
Yu Jie Wang ◽  
Yun Feng Xue
Keyword(s):  
Kinetic Equations ◽  
Adsorption Kinetic ◽  
Maximum Adsorption Capacity ◽  
Kinetics Of Adsorption ◽  
Ph Values ◽  
Optimum Ph ◽  
Pseudo Second Order ◽  
Simulated Wastewater ◽  
Isotherm Equations ◽  
Kinetics Of

The adsorption of cadmium in simulated wastewater by chitosan was investigated. The influence of temperature, contact time and pH on adsorption efficiency of cadmium was examined. Some related mathematical models were used in the fitting of experimental data. The results showed that at room temperature, the optimum pH of adsorption is between 4 and 7. At lower pH values, a strong competition existed between cadmium ions and protons for sorption sites and the sorption efficiency was decreased. After 60 minutes the adsorption equilibrium can be achieved. Chitosan is very effective at removing cadmium with the maximum adsorption capacity is 112.05mg•g-1. The adsorption kinetic curves agree with the pseudo-second-order adsorption kinetic equations and the adsorption isotherms could be well described by Langmuir isotherm equations.

scholarly journals Translocation of Cations During Sorption of Copper in the System Solution - Algae (Spirogyra sp.)/Translokacja Kationów Podczas Procesu Sorpcji Miedzi W Układzie Roztwór - Glony (Spirogyra Sp.)

2014 ◽  
Vol 21 (3) ◽  
pp. 425-433
Author(s):  
Małgorzata Rajfur ◽  
Andrzej Kłos ◽  
Jan Kříž
Keyword(s):  
Order Reaction ◽  
Static System ◽  
Second Order Reaction ◽  
System Solution ◽  
Fixed Proportion ◽  
Pseudo Second Order ◽  
The Difference ◽  
Kinetics Of ◽  
Copper Cations ◽  
Solution Volume

Abstract Kinetics of the sorption of copper cations in Spirogyra sp. algae was analysed, together with the accompanying processes of hydrogen cations sorption and releasing to the solution the cations bonded in the algae: Na+, Mg2+, K+ and Ca2+. It was established that, in a static system, at the fixed proportion of algae mass to the solution volume, these processes occur simultaneously, however presumably the quantity of the released salts influences the parameters of heterophase equilibrium of ion exchange. In the experiment conditions, the quantity of the released cations was nearly 10 times larger than the quantity of the sorbed cations. The equilibrium parameters, determined from the model of pseudo second order reaction, were compared with the parameters obtained after 30 min of the process duration, ie at relatively stable indications of measuring equipment. On the example of the sorbed copper, the difference is approximately 8%. It was confirmed that the solution conductivity is a good parameter for the estimation of the state close to equilibrium.

scholarly journals Development of PANI/BN-based absorbents for water remediation

2019 ◽  
Vol 54 (4) ◽  
pp. 290-298
Author(s):  
Muhammad Arsalan ◽  
Azka Awais ◽  
Tingting Chen ◽  
Qinglin Sheng ◽  
Jianbin Zheng
Keyword(s):  
Adsorption Process ◽  
Binding Capacity ◽  
Order Equation ◽  
Langmuir Model ◽  
Water Remediation ◽  
Ionic Bond ◽  
Adsorption Performance ◽  
Optimum Ph ◽  
Pseudo Second Order ◽  
Bond Effect

Abstract In this research, novel PANI/BN-based absorbent was prepared by bonding polyaniline and bentonite for water remediation and their structures were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The effect of pH, concentration of metal, and dosage amount on synthesized novel PANI/BN-based absorbent was investigated in detail. The result indicated that the PANI/BN-based absorbent has an excellent adsorption performance towards Cu, Pb, and Ni, and the highest binding capacity of 130 mg g−1 for Ni was obtained under normal conditions. The adsorption of PANI/BN absorbent was found to depend on pH when pH < 7.0, but the adsorption has been found independent from the ionic bond effect. The adsorption at optimum pH for Cu (pH 6) and Pb (pH 5) was observed as 85 mg g−1 and 105 mg g−1, respectively. The best results collected at those conditions of isotherm data and adsorption kinetics are represented by the Langmuir model and pseudo-second order equation, respectively. Thermodynamic results (ΔH > 0, ΔS > 0, ΔG < 0) showed that the adsorption process of Cu, Ni, and Pb is significantly increased by the synthesized novel PANI/BN-based absorbent.

scholarly journals Eco-Efficient Biosorbent Based on Leucaena leucocephala Residues for the Simultaneous Removal of Pb(II) and Cd(II) Ions from Water System: Sorption and Mechanism

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
C. A. Cimá-Mukul ◽  
Youness Abdellaoui ◽  
Mohamed Abatal ◽  
Joel Vargas ◽  
Arlette A. Santiago ◽  
...  
Keyword(s):  
Leucaena Leucocephala ◽  
Metal Ion ◽  
Water System ◽  
Ion Concentration ◽  
Point Of Zero Charge ◽  
Southern Mexico ◽  
Lead And Cadmium ◽  
Biosorption Process ◽  
Monolayer Adsorption ◽  
Pseudo Second Order

Leucaena leucocephala is a potential source of polyphenols widely available in southern Mexico. This work highlights the extraction of polyphenols from Leucaena leucocephala leaves waste (LLEPs) and the evaluation of their efficiency to remove the single and multicomponent Pb(II) and Cd(II) metal ions from aqueous solutions. Batch test conditions were carried out to examine the effects of contact time, initial metal ion concentration, and adsorbent dosage on the biosorption process. The surface textures and the composition of the LLEP biosorbent was characterized using pH of point of zero charge (pHPZC), attenuated total reflectance Fourier transform infrared (ATR-FTIR), and matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry, respectively. Further analysis using ATR-FTIR after adsorption contact of biosorbent was also investigated. The highest Langmuir saturation monolayer adsorption capacity, qm, for the removal of Pb(II) by LLEPs was obtained as 25.51 and 21.55 mg/g in mono- and bimetal solutions, respectively. The pseudo-second-order model provided the best fit for the kinetic data obtained for the removal of Pb(II), Cd(II), and their mixture, and the k2 values depend on the adsorbent mass. This implied that the chemisorption process might be the mechanism of the solute ions-LLEPs interaction in this study. Furthermore, nearly 100% removal of lead and cadmium individually and 95% of their mixture was found using 0.9 g of LLEPs.

Sign in / Sign up

Export Citation Format

Share Document