scholarly journals Figure 45. Photographs of core 1,4190 - 4227 ft, in the 6-9-83-16W6 well, containing the recommended new type section for the Siphon Member, Charlie Lake Formation

2009 ◽  
Author(s):  
J Dixon
Keyword(s):  
Type Section ◽  
Lake Formation ◽  
New Type

REFERENCE SECTION FOR THE MAJEAU LAKE FORMATION

1967 ◽  
Vol 4 (5) ◽  
pp. 873-876
Author(s):  
C. A. Pollock
Keyword(s):  
Type Section ◽  
Lake Formation ◽  
Standard Section ◽  
Conodont Fauna ◽  
Northeastern Alberta ◽  
Reference Section

A cored section in the Imperial Westlock No. 14–24 well (Lsd. 14, Sec.24, Tp.59, Rge.26, W.4th Meridian) in northeastern Alberta is proposed as a type reference section for the Majeau Lake Formation, and it is proposed that Texaco McColl Majeau No. 1 (Lsd. 12, Sec. 1, Tp. 57, Rge. 3, W. 5th Meridian) be formally adopted as the type section well. The formation is 216 ft thick in the reference well. The conodont fauna suggests that the Majeau Lake Formation lies within the middle Polygnathus asymmetrica (to Iα) Zone of the German Devonian standard section.

scholarly journals Upper Cretaceous to Lower Miocene of the Subsilesian Unit (Western Carpathians, Czech Republic): stratotypes of formations revised

2016 ◽  
Vol 67 (3) ◽  
pp. 239-259 ◽  
Author(s):  
Miroslav Bubík ◽  
Juraj Franců ◽  
Helena Gilíková ◽  
Jiří Otava ◽  
Lilian Švábenická
Keyword(s):  
Fossil Record ◽  
Upper Cretaceous ◽  
Original Description ◽  
Heavy Minerals ◽  
Type Section ◽  
Geochemical Proxies ◽  
Type Area ◽  
Original Definition ◽  
New Type ◽  
Sedimentary Succession

Abstract Type sections/areas for all four formations distinguished in the sedimentary succession of the Subsilesian Unit on Czech territory were revisited and described. New data on lithology, sedimentology, fossil record, biostratigraphy, heavy-minerals and geochemical proxies are based on observations and analysis of these sections. The historical type section of the Frýdek Formation was destroyed during railway construction in 19th century. Outcrops of Campanian to Maastrichtian marls and sandstones on the southwestern slope of “Castle hill” at Frýdek, are proposed as a new type section. The Ostravice riverbed in Frýdlant nad Ostravicí was originally designated as the type area, not mentioning the particular section. This area, even when supplemented with Sibudov Creek, does not show all typical facies of the formation. The outcrops range from lowermost Eocene to Eocene-Oligocene transition. In the original description of the Menilite Formation Glocker mentioned several localities in the area covering the Ždanice, Subsilesian and Silesian units, not mentioning the principal one. The single sections, each not exceeding a thickness of 2 m, are not sufficient to be a type section. Instead of that, we propose the area between Paršovice and Bystřice pod Hostýnem, covering the historical localities, as the type area. The type locality of the Ženklava Formation is an outcrop in an unnamed creek in Ženklava according to the original definition. It seems to be reasonable to extend the type section to the whole 500 m long section of the creek with the outcrops that better illustrate the lithological variability of the formation. New biostratigraphic data allow assignment to late Egerian (Eggenburgian?).

Suggested New Type Section for the Loveland Loess in Western Iowa

1959 ◽  
Vol 67 (1) ◽  
pp. 114-119 ◽  
Author(s):  
R. B. Daniels ◽  
R. L. Handy
Keyword(s):  
Type Section ◽  
New Type

The Microstructure of Shock-Synthesized Diamond

1967 ◽  
Vol 25 ◽  
pp. 324-325
Author(s):  
Lucien F. Trueb
Keyword(s):  
Single Crystals ◽  
Preferred Orientation ◽  
High Magnification ◽  
Texture Pattern ◽  
Shock Process ◽  
New Type ◽  
Diffraction Diagram

A new type of synthetic industrial diamond formed by an explosive shock process has been recently developed by the Du Pont Company. This material consists of a mixture of two basically different forms, as shown in Figure 1: relatively flat and compact aggregates of acicular crystallites, and single crystals in the form of irregular polyhedra with straight edges.Figure 2 is a high magnification micrograph typical for the fibrous aggregates; it shows that they are composed of bundles of crystallites 0.05-0.3 μ long and 0.02 μ. wide. The selected area diffraction diagram (insert in Figure 2) consists of a weak polycrystalline ring pattern and a strong texture pattern with arc reflections. The latter results from crystals having preferred orientation, which shows that in a given particle most fibrils have a similar orientation.

New type electron gun with electrostatic and electromagnetic lenses

1978 ◽  
Vol 36 (1) ◽  
pp. 62-63
Author(s):  
T. Ichinokawa ◽  
H. Maeda
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Optimum Condition ◽  
Bias Voltage ◽  
Electron Gun ◽  
Charge Effect ◽  
Micro Fabrication ◽  
Maximum Brightness ◽  
New Type ◽  
The Ideal

I. IntroductionThermionic electron gun with the Wehnelt grid is popularly used in the electron microscopy and electron beam micro-fabrication. It is well known that this gun could get the ideal brightness caluculated from the Lengumier and Richardson equations under the optimum condition. However, the design and ajustment to the optimum condition is not so easy. The gun has following properties with respect to the Wehnelt bias; (1) The maximum brightness is got only in the optimum bias. (2) In the larger bias than the optimum, the brightness decreases with increasing the bias voltage on account of the space charge effect. (3) In the smaller bias than the optimum, the brightness decreases with bias voltage on account of spreading of the cross over spot due to the aberrations of the electrostatic immersion lens.In the present experiment, a new type electron gun with the electrostatic and electromagnetic lens is designed, and its properties are examined experimentally.

A new type of defect structure in 124-superconducting oxide revealed by HREM

1991 ◽  
Vol 49 ◽  
pp. 1092-1093
Author(s):  
R. Sharma ◽  
B.L. Ramakrishna ◽  
N.N. Thadhani ◽  
D. Hianes ◽  
Z. Iqbal
Keyword(s):  
Shock Wave ◽  
Defect Structure ◽  
Neutron Radiation ◽  
Weak Links ◽  
Defect Structures ◽  
New Materials ◽  
New Type ◽  
Current Densities ◽  
Processing Techniques ◽  
Microstructural Studies

After materials with superconducting temperatures higher than liquid nitrogen have been prepared, more emphasis has been on increasing the current densities (Jc) of high Tc superconductors than finding new materials with higher transition temperatures. Different processing techniques i.e thin films, shock wave processing, neutron radiation etc. have been applied in order to increase Jc. Microstructural studies of compounds thus prepared have shown either a decrease in gram boundaries that act as weak-links or increase in defect structure that act as flux-pinning centers. We have studied shock wave synthesized Tl-Ba-Cu-O and shock wave processed Y-123 superconductors with somewhat different properties compared to those prepared by solid-state reaction. Here we report the defect structures observed in the shock-processed Y-124 superconductors.

ESEM - A multipurpose surface Electron Microscope

1986 ◽  
Vol 44 ◽  
pp. 632-633 ◽  
Author(s):  
G.D. Danilatos
Keyword(s):  
Electron Microscope ◽  
Room Temperature ◽  
Environmental Scanning ◽  
Gas Composition ◽  
Saturated Water Vapor ◽  
Surface Electron ◽  
Current State ◽  
Saturated Water ◽  
New Type ◽  
Temperature And Pressure

Over recent years a new type of electron microscope - the environmental scanning electron microscope (ESEM) - has been developed for the examination of specimen surfaces in the presence of gases. A detailed series of reports on the system has appeared elsewhere. A review summary of the current state and potential of the system is presented here.The gas composition, temperature and pressure can be varied in the specimen chamber of the ESEM. With air, the pressure can be up to one atmosphere (about 1000 mbar). Environments with fully saturated water vapor only at room temperature (20-30 mbar) can be easily maintained whilst liquid water or other solutions, together with uncoated specimens, can be imaged routinely during various applications.

Sign in / Sign up

Export Citation Format

Share Document