scholarly journals Spatial analysis of asbestos exposure and occupational health care in Poland during the period 2004-2013

2018 ◽  
Vol 13 (2) ◽  
Author(s):  
Małgorzata Krówczyńska ◽  
Ewa Wilk

Asbestos is carcinogenic to humans and exposure to this substance can cause a wide range of diseases. In Poland 1997, a statutory ban was introduced on the production, use and marketing of products containing asbestos. The National Programme for Asbestos Abatement for 2009-2032 includes scheduled activities considering asbestos exposure assessment and health protection. As there are several data sources for asbestos exposure in Poland, which are not linked, the aim of this study was to gather and order them developing a PostgreSQL database, an open-source, objectrelational system. The data gathered combines the following information: the quantity of asbestos-cement products in use, details of asbestos manufacturing plants, the results of the measurements of asbestos fibre concentrations in the air and cases of asbestos-related diseases. The relational database was then used to develop a spatial analysis of asbestos monitoring and exposure in Poland to demonstrate the current state of realisation of the National Asbestos Abatement Programme in the country for 2009-2032 with the use of geoinformation techniques. The use of a database on health aspects of occupational and environmental asbestos exposure was also proposed in Asbestos, Asbestosis, and Cancer: Helsinki Criteria update 2014.

Author(s):  
Małgorzata Krówczyńska ◽  
Ewa Wilk

Asbestos is harmful to human health; exposure to asbestos causes a wide range of asbestos-related diseases. Aim: Malignant mesothelioma (MM) is unique to occupational and environmental asbestos exposure. Methods: Environmental asbestos exposure was examined in relation to asbestos use and manufacturing, the quantity of the asbestos-containing products still in use, the concentrations of asbestos fibres in the air and the number of MM cases diagnosed each year per county. Results: The correlation coefficient of the measurements of the asbestos fibre concentrations in the air and the quantity of asbestos-cement products in use is high and amounts to 0.68. Meanwhile, the correlation coefficient of the measurements of asbestos fibre concentrations in air and MM morbidity rate resulting from environmental exposure calculated for particular counties in provinces is low and amounts to 0.37. The highest MM morbidity rate was observed for Małopolskie and Śląskie, a typical industrial area of Poland. Conclusions: There are MM cases which are still attributable to occupational asbestos exposure, although MM cases resulting from environmental exposure to asbestos have an increased MM risk. Poland is among those countries with a low MM incidence rate, which seems to be an underestimation of environmental asbestos exposure. As long as asbestos-cement products are used in the environment, actions should be undertaken to protect public health.


Author(s):  
Małgorzata Krówczyńska ◽  
Ewa Wilk

Asbestos is carcinogenic to humans; the exposure to asbestos causes a wide range of diseases. Aim: Malignant mesothelioma (MM) is unique for asbestos exposure. Methods: Based on the physical inventory of asbestos-cement roofing, the social-economic situation of communes, the proximity of asbestos manufacturing plants, the land use data referring to the surface of the built-up area, and the historical data on the annexations, the amount of asbestos-containing products in use was estimated by computing best Random Forest models. Per capita asbestos use is an indicator to compare the state of asbestos use among countries. MM cases in the local administrative units (provinces) were tested by the application of Moran’s I and Getis and Ord statistic. Results: The total amount of asbestos roofing in Poland was estimated at 738,068,000 m2 (8.2 million tons). In total there were 28 plants in Poland located in 11 provinces throughout the country. The amount of asbestos-cement roofing in use is correlated primarily with the measurements of asbestos concentration fibers (rs = 0.597). MM raw morbidity rate was calculated, stratified by province, and classified into five groups with respect to incidence. Hotspots of MM cases are in the southern part of Poland. Conclusions: MM cases are concentrated in the same geographical areas, which may indicate an increasing impact of environmental exposure. The results of the local and global autocorrelation clearly indicate a statistically significant relationship between incidences of MM in provinces. Poland and other Eastern European countries are among countries with low MM incidence rate. Detailed investigation is desirable since the current MM morbidity rate in Poland seems to be underestimated.


2018 ◽  
Vol 13 (2) ◽  
Author(s):  
Małgorzata Krówczyńska ◽  
Ewa Wilk ◽  
Piotr Pabjanek ◽  
Gabriela Olędzka

Malignant mesothelioma (MM), a rare and very deadly tumour, can be due to asbestos exposure. To better understand the cause of incidence of MM, spatial autocorrelation analysis with reference to the quantity of asbestos-cement products in use and the localisation of former asbestos manufacturing plants was applied. Geostatistical analysis shows that strong spatial clustering of MM incidence (referring to the general population as well as females and males separately) during the period 1999-2013 in the administrative units of Poland (provinces and counties). Incidence hotspots were found to be concentrated primarily in southern Poland but also seen in the county of Szczecin, which stands out in local autocorrelation analysis in north-western Poland. High incidence rates were discovered, in particular with reference to counties around former plants manufacturing asbestos-containing products, mainly asbestos-cement manufacturers. The highest frequency of MM incidence rate was found in within a 55 km radius of plants in or near the towns Trzebinia, Ogrodzieniec and Szczucin in the South, where asbestos-cement products had been manufactured for close to 40 years. Areas with significantly high incidence rates were also discovered in the provinces of Śląskie, Małopolskie and Świętokrzyskie in southern Poland.


2019 ◽  
Vol 14 (1-2) ◽  
pp. 295-297
Author(s):  
Sergej A. Borisov

For more than twenty years, the Institute of Slavic Studies of the Russian Academy of Sciences celebrates the Day of Slavic Writing and Culture with a traditional scholarly conference.”. Since 2014, it has been held in the young scholars’ format. In 2019, participants from Moscow, St. Petersburg, Kazan, Togliatti, Tyumen, Yekaterinburg, and Rostov-on-Don, as well as Slovakia, the Czech Republic, Hungary, and Romania continued this tradition. A wide range of problems related to the history of the Slavic peoples from the Middle Ages to the present time in the national, regional and international context were discussed again. Participants talked about the typology of Slavic languages and dialects, linguo-geography, socio- and ethnolinguistics, analyzed formation, development, current state, and prospects of Slavic literatures, etc.


Author(s):  
Eun-Soo Lee ◽  
Young-Ki Kim

Asbestos-cement slate roofs are one of the most common environmental causes of asbestos exposure. However, few studies have examined residential asbestos-cement slate-related exposure and its effects on human health. This study was performed to evaluate cumulative asbestos exposure levels and to calculate the Excess Lifetime Cancer Risk (ELCR) of residents of asbestos-cement slate-roofed houses. We reviewed previous Korean literature to estimate the concentration of airborne asbestos from asbestos-cement slate roofed buildings. Finally, eight studies were selected, and a pooled analysis was performed. The results derived from the pooled analysis were combined with the data from a health impact survey conducted from 2009 to 2016 at the Environmental Health Center for Asbestos (EHCA) of the Yangsan Pusan National University Hospital, and a carcinogenic risk assessment was performed. As a result, the representative value of the indoor exposure concentration related to asbestos-cement slate was found to be 0.0032 f/cc on average, and the representative value of the exposure related to occupational asbestos-cement slate dismantling and demolition was found to be 0.0034 f/cc. In addition, the ELCR of asbestos-cement slate related indoor exposure and occupational dismantling and demolition was found to be of medium risk, and the ELCR of residential dismantling and demolition of asbestos-cement slate was less than 10−6, indicating that the risk was low. Since there is no threshold for carcinogenicity related to asbestos, this should not be ignored even if the risk appears low, and it would be reasonable to calculate the carcinogenic risk based on total lifetime exposure. More studies on asbestos exposure scenarios and the scope of similar exposure groups through additional data collection and further analysis of risk are needed.


2021 ◽  
Vol 5 (1) ◽  
pp. 14
Author(s):  
Georgi G. Gochev ◽  
Volodymyr I. Kovalchuk ◽  
Eugene V. Aksenenko ◽  
Valentin B. Fainerman ◽  
Reinhard Miller

The theoretical description of the adsorption of proteins at liquid/fluid interfaces suffers from the inapplicability of classical formalisms, which soundly calls for the development of more complicated adsorption models. A Frumkin-type thermodynamic 2-d solution model that accounts for nonidealities of interface enthalpy and entropy was proposed about two decades ago and has been continuously developed in the course of comparisons with experimental data. In a previous paper we investigated the adsorption of the globular protein β-lactoglobulin at the water/air interface and used such a model to analyze the experimental isotherms of the surface pressure, Π(c), and the frequency-, f-, dependent surface dilational viscoelasticity modulus, E(c)f, in a wide range of protein concentrations, c, and at pH 7. However, the best fit between theory and experiment proposed in that paper appeared incompatible with new data on the surface excess, Γ, obtained from direct measurements with neutron reflectometry. Therefore, in this work, the same model is simultaneously applied to a larger set of experimental dependences, e.g., Π(c), Γ(c), E(Π)f, etc., with E-values measured strictly in the linear viscoelasticity regime. Despite this ambitious complication, a best global fit was elaborated using a single set of parameter values, which well describes all experimental dependencies, thus corroborating the validity of the chosen thermodynamic model. Furthermore, we applied the model in the same manner to experimental results obtained at pH 3 and pH 5 in order to explain the well-pronounced effect of pH on the interfacial behavior of β-lactoglobulin. The results revealed that the propensity of β-lactoglobulin globules to unfold upon adsorption and stretch at the interface decreases in the order pH 3 > pH 7 > pH 5, i.e., with decreasing protein net charge. Finally, we discuss advantages and limitations in the current state of the model.


2020 ◽  
Vol 12 (17) ◽  
pp. 2760
Author(s):  
Gourav Misra ◽  
Fiona Cawkwell ◽  
Astrid Wingler

Remote sensing of plant phenology as an indicator of climate change and for mapping land cover has received significant scientific interest in the past two decades. The advancing of spring events, the lengthening of the growing season, the shifting of tree lines, the decreasing sensitivity to warming and the uniformity of spring across elevations are a few of the important indicators of trends in phenology. The Sentinel-2 satellite sensors launched in June 2015 (A) and March 2017 (B), with their high temporal frequency and spatial resolution for improved land mapping missions, have contributed significantly to knowledge on vegetation over the last three years. However, despite the additional red-edge and short wave infra-red (SWIR) bands available on the Sentinel-2 multispectral instruments, with improved vegetation species detection capabilities, there has been very little research on their efficacy to track vegetation cover and its phenology. For example, out of approximately every four papers that analyse normalised difference vegetation index (NDVI) or enhanced vegetation index (EVI) derived from Sentinel-2 imagery, only one mentions either SWIR or the red-edge bands. Despite the short duration that the Sentinel-2 platforms have been operational, they have proved their potential in a wide range of phenological studies of crops, forests, natural grasslands, and other vegetated areas, and in particular through fusion of the data with those from other sensors, e.g., Sentinel-1, Landsat and MODIS. This review paper discusses the current state of vegetation phenology studies based on the first five years of Sentinel-2, their advantages, limitations, and the scope for future developments.


Antioxidants ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 71
Author(s):  
Marianna Martinello ◽  
Franco Mutinelli

Bee products have been used since ancient times both for their nutritional value and for a broad spectrum of therapeutic purposes. They are deemed to be a potential source of natural antioxidants that can counteract the effects of oxidative stress underlying the pathogenesis of many diseases. In view of the growing interest in using bioactive substances from natural sources to promote health and reduce the risk of developing certain illnesses, this review aims to update the current state of knowledge on the antioxidant capacity of bee products such as honey, pollen, propolis, beeswax, royal jelly and bee venom, and on the analytical methods used. The complex, variable composition of these products and the multitude of analytical methods used to study their antioxidant activities are responsible for the wide range of results reported by a plethora of available studies. This suggests the need to establish standardized methods to more efficiently evaluate the intrinsic antioxidant characteristics of these products and make the data obtained more comparable.


Parasitology ◽  
1999 ◽  
Vol 117 (7) ◽  
pp. 191-203 ◽  
Author(s):  
M. S. TALARY ◽  
J. P. H. BURT ◽  
R. PETHIG

There has been an enormous growth in the development of biotechnological applications, where advances in the techniques of microelectronic fabrication and the technologies of miniaturization and integration in semiconductor industries are being applied to the production of Laboratory-on-a-Chip devices. The aim of this development is to create devices that will perform the same processes that are currently carried out in the laboratory in reduced timescales, at a lower cost, requiring less reagents, and with a greater resolution of detection and specificity. The expectations of this Laboratory-on-a-Chip revolution is that this technology will facilitate rapid advances in gene discovery, genetic mapping and gene expression with broader applications ranging from infectious diseases and cancer diagnostics to food quality and environmental testing. A review of the current state of development in this field reveals the scale of the ongoing revolution and serves to highlight the advances that can be perceived in the development of Laboratory-on-a-Chip technologies. Since miniaturization can be applied to such a wide range of laboratory processes, some of the sub-units that can be used as building blocks in these devices are described, with a brief description of some of the fabrication processes that can be used to create them.


Author(s):  
Paul S. Addison

Redundancy: it is a word heavy with connotations of lacking usefulness. I often hear that the rationale for not using the continuous wavelet transform (CWT)—even when it appears most appropriate for the problem at hand—is that it is ‘redundant’. Sometimes the conversation ends there, as if self-explanatory. However, in the context of the CWT, ‘redundant’ is not a pejorative term, it simply refers to a less compact form used to represent the information within the signal. The benefit of this new form—the CWT—is that it allows for intricate structural characteristics of the signal information to be made manifest within the transform space, where it can be more amenable to study: resolution over redundancy. Once the signal information is in CWT form, a range of powerful analysis methods can then be employed for its extraction, interpretation and/or manipulation. This theme issue is intended to provide the reader with an overview of the current state of the art of CWT analysis methods from across a wide range of numerate disciplines, including fluid dynamics, structural mechanics, geophysics, medicine, astronomy and finance. This article is part of the theme issue ‘Redundancy rules: the continuous wavelet transform comes of age’.


Sign in / Sign up

Export Citation Format

Share Document