AUV Ultrahigh-Resolution 3D Seismic Technique for Detailed Subsurface Investigations

2007 ◽  
Author(s):  
Robert A. George ◽  
Eric Cauquil
Keyword(s):  
3D Seismic ◽  
Ultrahigh Resolution ◽  
Subsurface Investigations

Dense arrays of short streamers for ultrahigh-resolution 3D seismic imaging

2016 ◽  
Vol 35 (7) ◽  
pp. 594-599 ◽  
Author(s):  
Brian N. Brookshire ◽  
Craig Lippus ◽  
Abby Parish ◽  
Brandon Mattox ◽  
Allen Burks
Keyword(s):  
Seismic Imaging ◽  
3D Seismic ◽  
Ultrahigh Resolution ◽  
Dense Arrays

Development of 200kV ultrahigh-resolution analytical electron microscope

1989 ◽  
Vol 47 ◽  
pp. 108-109
Author(s):  
T. Kaneyama ◽  
M. Naruse ◽  
Y. Ishida ◽  
M. Kersker
Keyword(s):  
Electron Microscope ◽  
Optical Constants ◽  
Materials Science ◽  
Objective Lens ◽  
The Finite Element Method ◽  
Ultrahigh Resolution ◽  
Analytical Electron ◽  
Analytical Electron Microscope ◽  
Characteristic Features ◽  
Better Than

In the field of materials science, the importance of the ultrahigh resolution analytical electron microscope (UHRAEM) is increasing. A new UHRAEM which provides a resolution of better than 0.2 nm and allows analysis of a few nm areas has been developed. [Fig. 1 shows the external view] The followings are some characteristic features of the UHRAEM.Objective lens (OL)Two types of OL polepieces (URP for ±10' specimen tilt and ARP for ±30' tilt) have been developed. The optical constants shown in the table on the next page are figures calculated by the finite element method. However, Cs was experimentally confirmed by two methods (namely, Beam Tilt method and Krivanek method) as 0.45 ∼ 0.50 mm for URP and as 0.9 ∼ 1.0 mm for ARP, respectively. Fig. 2 shows an optical diffractogram obtained from a micrograph of amorphous carbon with URP under the Scherzer defocus condition. It demonstrates a resolution of 0.19 nm and a Cs smaller than 0.5 mm.

High-resolution scanning electron microscopy in biology

1990 ◽  
Vol 48 (3) ◽  
pp. 14-15
Author(s):  
Keiichi Tanaka
Keyword(s):  
High Resolution ◽  
Immunoglobulin M ◽  
Metal Coating ◽  
Biological Macromolecules ◽  
Ultrahigh Resolution ◽  
Preparation Methods ◽  
Low Contrast ◽  
Almost All ◽  
Charging Effect ◽  
Scanning Electron

With the development of scanning electron microscope (SEM) with ultrahigh resolution, SEM became to play an important role in not only cytology but also molecular biology. However, the preparation methods observing tiny specimens with such high resolution SEM are not yet established.Although SEM specimens are usually coated with metals for getting electrical conductivity, it is desirable to avoid the metal coating for high resolution SEM, because the coating seriously affects resolution at this level, unless special coating techniques are used. For avoiding charging effect without metal coating, we previously reported a method in which polished carbon plates were used as substrate. In the case almost all incident electrons penetrate through the specimens and do not accumulate in them, when the specimens are smaller than 10nm. By this technique some biological macromolecules including ribosomes, ferritin, immunoglobulin G were clearly observed.Unfortunately some other molecules such as apoferritin, thyroglobulin and immunoglobulin M were difficult to be observed only by the method, because they had very low contrast and were easily damaged by electron beam.

Development of high-performance objective lens polepiece for ultrahigh resolution Analytical Electron Microscope

1993 ◽  
Vol 51 ◽  
pp. 254-255
Author(s):  
K. Fukushima ◽  
T. Kaneyama ◽  
F. Hosokawa ◽  
H. Tsuno ◽  
T. Honda ◽  
...  
Keyword(s):  
Electron Microscope ◽  
High Performance ◽  
Open Space ◽  
Materials Science ◽  
Objective Lens ◽  
Ultrahigh Resolution ◽  
Science Field ◽  
Specimen Holder ◽  
Analytical Electron ◽  
Analytical Electron Microscope

Recently, in the materials science field, the ultrahigh resolution analytical electron microscope (UHRAEM) has become a very important instrument to study extremely fine areas of the specimen. The requirements related to the performance of the UHRAEM are becoming gradually severer. Some basic characteristic features required of an objective lens are as follows, and the practical performance of the UHRAEM should be judged by totally evaluating them.1) Ultrahigh resolution to resolve ultrafine structure by atomic-level observation.2) Nanometer probe analysis to analyse the constituent elements in nm-areas of the specimen.3) Better performance of x-ray detection for EDS analysis, that is, higher take-off angle and larger detection solid angle.4) Higher specimen tilting angle to adjust the specimen orientation.To attain these requirements simultaneously, the objective lens polepiece must have smaller spherical and chromatic aberration coefficients and must keep enough open space around the specimen holder in it.

3D Seismic Petrophysical Evaluation of Complex Clastic-Carbonate Sequences in the Neuquen Basin, Argentina. A Case Study

2009 ◽  
Author(s):  
Pablo Andres Borghi ◽  
Erick Raciel Alvarez ◽  
Jaume Hernandez ◽  
Rafael Vela ◽  
Marco Antonio Vasquez ◽  
...  
Keyword(s):  
3D Seismic ◽  
Neuquen Basin ◽  
Neuquén Basin ◽  
Petrophysical Evaluation
Sign in / Sign up

Export Citation Format

Share Document