scholarly journals Enzymatic interesterification on the physicochemical properties of Moringa oleifera seed oil blended with palm olein and virgin coconut oil

2015 ◽  
Vol 66 (2) ◽  
pp. e073 ◽  
Author(s):  
H. M. Ghazali ◽  
S. Dollah ◽  
S. M. Abdulkarim ◽  
S. H. Ahmad ◽  
A. Khoramnia
Molecules ◽  
2014 ◽  
Vol 19 (7) ◽  
pp. 9187-9202 ◽  
Author(s):  
Yih Khor ◽  
Soo Koh ◽  
Kamariah Long ◽  
Shariah Long ◽  
Sharifah Ahmad ◽  
...  

Author(s):  
ABDUL ROHMAN ◽  
YAAKOB BIN CHE MAN ◽  
MD. EAKUB ALI

Objective: The objective of this study was to develop Fourier transform infrared (FTIR) spectroscopy in combination with chemometrics of multivariate calibration and discriminant analysis (DA) for the authentication of virgin coconut oil (VCO) from grape seed oil (GSO) and soybean oil (SO). Methods: FTIR spectra of VCO, GSO, SO and its binary mixture of VCO-SO, and VCO-GSO were scanned at mid-infrared region (4000-650 cm-1) using attenuated total reflectance technique. The wavenumbers were selected based on its capability to provide the best prediction models for quantification and classification of adulterants in VCO assisted by multivariate calibrations and DA, respectively. Results: The results showed that partial least square (PLS) calibration using absorbance values at combined wavenumbers of 1200-900 and 3027-2985 cm-1 revealed reliable method for quantification of GSO in VCO, as indicated by high value of coefficient of determination (R2) and low value of root mean square of calibration (RMSEC) and root mean square error of prediction (RMSEP). PLS using FTIR spectra at the combined wavenumbers of 1200-1000 and 3025-2995 cm-1 was suitable for quantitative analysis of SO in VCO. DAwas also successfully used for classification of VCO and VCO added with adulterants of GSO and SO. Conclusion: FTIR spectroscopy in combination with chemometrics of multivariate calibration and DA offered effective tools for the authentication of VCO


2020 ◽  
Vol 7 (3) ◽  
pp. 911-920
Author(s):  
Abeer IDRIS ◽  
Azhari NOUR ◽  
Omer ISHAG ◽  
Mahmoud ALİ ◽  
Ibrahim ERWA ◽  
...  

2021 ◽  
Vol 12 (1) ◽  
pp. 235
Author(s):  
Putu Hadi Setyarini ◽  
Khairul Anam ◽  
Muhammad Wahyudi

<p class="Abstract">Environmentally friendly lubricants are lubricants that are easily dissolved in the environment and are not harmful to the ecosystem. It uses to reduce the heat in the contact area so that the machinability of the workpiece and the ability of the chisel will increase. To minimize the use of bio-cutting fluids, lubrication is carried out by minimum drop lubrication in the lathe process. The purpose of this research is to comply with the surface roughness of the workpiece and the shape of the chip. The material used is aluminum 6061, the natural oil used are rubber seed oil, virgin coconut oil, sunflower seed oil, and castor oil. The turning parameters were the depth of cut 0.5 mm, spindle speed of 330 rpm, feed rate 0.231 mm/rev, tool angle 90o, drop lubrication 192 ml/hour, infeed length 100 mm. The results of the research showed that virgin coconut oil has the lowest surface roughness. This is because the viscosity value of virgin coconut oil is very small so that the flow rate is able to work perfectly to lubricate the contact area. It has a thin chip configuration, the tool also wears but did not experience cracks.</p>


Author(s):  
Alex Y ◽  
Roji George Roy

Biodiesel has become more attractive recently, because of its environmental benefits and the fact that it is made from renewable resources. Over the past few decades, most of the countries depending on diesel engines for transportation. Some of its valuable advantages like highest thermal efficiency made it very popular. At the same time, the cost of diesel fuel is increasing, due to the depletion of fossil fuels. In this current scenario, we need an alternative fuel instead of diesel fuel. Many of the researchers have successfully placed several works on generating energy from different types of alternative sources including solar and some kind of conversion processes including renewable agricultural products into liquid fuel. One of the biggest challenges for developing countries in relation to energy consumption is to develop and implement technologies that help to improve efficiency of automobile engines, also to reduce the emissions of harmful gases and particulate matters. In order to avoid environmental impacts, emissions are reduced or eliminated by introducing renewable energy resources. The present research chronicles the production and testing of renewable biodiesel fuel derived from virgin coconut oil on a diesel engine, to analyses the engine performance and emission characteristics. In the first phase of work, production of biodiesel fuel from virgin coconut oil using transeterification process with two types of catalysts (homogenous and heterogeneous). The preliminary results shows that, with the addition of homogenous catalyst called Potassium Hydroxide (KOH) with methanol shows much higher activity than that of heterogeneous catalysts, and it shows more similar properties with diesel fuel. The results obtained from the chemical test and physicochemical properties of transesterified biodiesel fuel clearly proves the above-mentioned statement. The chemical tests such as GCMS and FT-IR clearly shows that the biodiesel fuel has sufficient amount of volatile components and functional groups. Then, physicochemical properties include, Fire point, Flashpoint, density, and viscosity were analyzed. Finally, Engine performance and Emission characteristics were analysed to confirm, whether this biodiesel fuel is suitable for diesel engines, without any engine modifications. It was found to be, the transesterified virgin coconut oil biodiesel has similar properties to that of the diesel fuel. From the physiochemical properties and engine performance clearly shows that, coconut oil biodiesel is suitable for diesel engine on blending, at a blending percentage level of 20% with conventional diesel fuel. Since the obtained transesterified biofuel can be used as an alternative fuel for diesel engines. The several journal reports and find outs from experimental investigation clearly depicts that the efficiency of the transesterified biofuel mainly depends upon the amount of catalyst adding and type of catalysts present in the biofuel, whether it is homogenous or heterogeneous catalyst is suitable with methanol. Finally, from the analysis made from biodiesel fuel. Coconut Oil Biodiesel fuel has less emission characteristics than that of the diesel fuels.


2018 ◽  
Vol 6 (5) ◽  
pp. 1298-1306 ◽  
Author(s):  
Nurul Aqilah A. Ghani ◽  
Amy-Arniza Channip ◽  
Phoebe Chok Hwee Hwa ◽  
Fairuzeta Ja'afar ◽  
Hartini M. Yasin ◽  
...  

CORD ◽  
2018 ◽  
Vol 34 (1) ◽  
pp. 9
Author(s):  
J.M.N. Marikkar

Authentication of virgin coconut oil (VCO) is important to safeguard customers from adulteration practices. A study was carried out to distinguish VCO from VCO adulterated with palm olein (PO) using principal component analysis (PCA) of fatty acid (FA) compositional data. Six samples of VCO, and six samples of palm olein were obtained from oil producers’ companies in Malaysia. Six samples of adulterated VCO were prepared by mixing with palm olein in 5% increment of adulteration. Fatty acid compositions of all oil samples were determined individually and the data were analyzed statistically. PCA analysis showed that lauric, palmitic and oleic acids were the most influencing parameters to discriminate VCO from adulterated VCO. Out of the thirteen FA variables investigated, ten were found to display high correlation with increasing adulteration. Predictive models showing higher coefficient of determination (R2) and good confidence limits were useful for quantification purposes.


Sign in / Sign up

Export Citation Format

Share Document