Physico-Chemical and Functional Quality of Buffalo Head Meat and Heart Meat

2008 ◽  
Vol 3 (2) ◽  
pp. 134-140 ◽  
Author(s):  
A.K. Verma ◽  
V. Lakshmanan ◽  
Arun K. Das ◽  
S.K. Mendiratta ◽  
A.S.R. Anjaneyulu
Keyword(s):  
Functional Quality ◽  
Physico Chemical

DECOLOURIZATION AND COD REMOVAL OF WASEWATER FROM ETHANOL PRODUCTION PROCESS FROM MOLASSES BY COAGULANTION USING INORGANIC ALUM

2010 ◽  
Vol 13 (3) ◽  
pp. 92-102
Author(s):  
Trung Duc Le
Keyword(s):  
Ethanol Production ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Treated Wastewater ◽  
Treatment Processes ◽  
Physico Chemical ◽  
Biological Methods ◽  
Treatment Step ◽  
Main Material

The industrial production of ethanol by fermentation using molasses as main material that generates large quantity of wastewater. This wastewater contains high levels of colour and chemical oxygen demand (COD), that may causes serious environmental pollution. Most available treatment processes in Vietnam rely on biological methods, which often fail to treat waste water up to discharge standard. As always, it was reported that quality of treated wastewater could not meet Vietnameses discharge standard. So, it is necessary to improve the treatment efficiency of whole technological process and therefore, supplemental physico-chemical treatment step before biodegradation stage should be the appropriate choice. This study was carried out to assess the effect of coagulation process on decolourization and COD removal in molasses-based ethanol production wastewater using inorganic coaglutant under laboratory conditions. The experimental results showed that the reductions of COD and colour with the utilization of Al2(SO4)3 at pH 9.5 were 83% and 70%, respectively. Mixture FeSO4 – Al2(SO4)3 at pH 8.5 reduced 82% of colour and 70% of COD. With the addition of Polyacrylamide (PAM), the reduction efficiencies of colour, COD and turbidity by FeSO4 – Al2(SO4)3 were 87%, 73.1% and 94.1% correspondingly. It was indicated that PAM significantly reduced the turbidity of wastewater, however it virtually did not increase the efficiencies of colour and COD reduction. Furthermore, the coagulation processes using PAM usually produces a mount of sludge which is hard to be deposited.

Physico-Chemical Assessment of Groundwater Quality of Ahmednagar Industrial Area

2011 ◽  
Vol 4 (4) ◽  
pp. 228-230
Author(s):  
Patil S.S Patil S.S ◽  
◽  
Gandhe H.D Gandhe H.D ◽  
Ghorade I.B Ghorade I.B
Keyword(s):  
Groundwater Quality ◽  
Industrial Area ◽  
Physico Chemical ◽  
Chemical Assessment

Physico-Chemical Analysis of Groundwater and Effect of Climatic Change in Angul-Talcher Area

2018 ◽  
Vol 6 (12) ◽  
pp. 26
Author(s):  
Aliva Bera ◽  
D.P. Satapathy
Keyword(s):  
Water Resources ◽  
Linear Regression ◽  
Regression Model ◽  
Climatic Change ◽  
Linear Regression Model ◽  
Ann Model ◽  
Quality Of Water ◽  
Physico Chemical ◽  
Simulation Based

In this paper, the linear regression model using ANN and the linear regression model using MS Excel were developed to estimate the physico-chemical concentrations in groundwater using pH, EC, TDS, TH, HCO3 as input parameters and Ca, Mg and K as output parameters. A comparison was made which indicated that ANN model had the better ability to estimate the physic-chemical concentrations in groundwater. An analytical survey along with simulation based tests for finding the climatic change and its effect on agriculture and water bodies in Angul-Talcher area is done. The various seasonal parameters such as pH, BOD, COD, TDS,TSS along with heavy elements like Pb, Cd, Zn, Cu, Fe, Mn concentration in water resources has been analyzed. For past 30 years rainfall data has been analyzed and water quality index values has been studied to find normal and abnormal quality of water resources and matlab based simulation has been done for performance analysis. All results has been analyzed and it is found that the condition is stable. 

Physico-Chemical Aspects of the Influence of Raw Material Components on the Quality of Ceramic Brick

2019 ◽  
Vol 777 (12) ◽  
pp. 37-42
Author(s):  
G.Yu. SHAGIGALIN ◽  
◽  
P.A. FEDOROV ◽  
L.N. LOMAKINA ◽  
◽  
...  
Keyword(s):  
Raw Material ◽  
Ceramic Brick ◽  
Physico Chemical

QUALIDADE DAS ÁGUAS E NÍVEL TRÓFICO DA BACIA DO RIO PACIÊNCIA NA ILHA DO MARANHÃO, BRASIL

2019 ◽  
Vol 21 (2) ◽  
pp. 437-453
Author(s):  
Elna Lucilia Santos Corrêa ◽  
Karina Suzana Feitosa Pinheiro ◽  
Cláudio José Da Silva de Sousa ◽  
Luiz Jorge Bezerra da Silva Dias
Keyword(s):  
Water Quality ◽  
Trophic Status ◽  
The Body ◽  
Chemical Parameters ◽  
Public Supply ◽  
Physico Chemical ◽  
Great Availability ◽  
Del Rio ◽  
Fluvial Environments

O Brasil apresenta grande disponibilidade de água doce em seus mananciais. Fazendo parte desse recurso encontra-se, o rio Paciência, localizado na Ilha do Maranhão destacado pela sua importância local, principalmente por contribuir com suas águas para recarga dos mananciais subterrâneos, fonte de abastecimento público de vários bairros de São Luís, capital do estado. No entanto, este rio vem sofrendo comprometimento da qualidade de suas águas, consequência do processo de uso e ocupação dos espaços em sua bacia. Destacando-se como um dos principais problemas relacionados a qualidade de ambientes fluviais,  a eutrofização, que consiste no processo em que o corpo d’água adquire elevados níveis de nutrientes (fosfatos e nitratos), é um indicador determinante da qualidade da água. Neste sentido, o objetivo deste trabalho foi caracterizar a qualidade da água e do estado trófico na bacia hidrográfica do rio Paciência atráves dos parâmetros fisico-químico evidenciando os trechos mais comprometidos conforme os valores alcançados nas análises. Os resultados das análises foram comparados com a CONAMA No. 357/05 que indicaram uma situação preocupante quanto à qualidade da água no local de estudo.Palavras-chave: Qualidade de água; Eutrofização; Ilha do Maranhão. ABSTRACTThe Brazil has great availability of fresh water in its springs. Within these contexts, the Paciência River, located on the Island of Maranhão stands out for its local importance, mainly for contributing its waters to the recharge of the underground springs, source of public supply of several districts of São Luís, capital of the state. However, this river has been compromising the quality of its waters, a consequence of the process of use and occupation of the spaces in its basin. Highlighting as one of the main problems related to the quality of fluvial environments, eutrophication, which consists of the process in which the body of water acquires high levels of nutrients (phosphates and nitrates), is a determinant indicator of water quality. In this sense, the objective of this work was to characterize the water quality and trophic status in the Paciência river basin through the physico-chemical parameters, showing the most compromised stretches according to the values reached in the analyzes. The results of the analyzes were compared with CONAMA No. 357/05 which indicated a worrying situation regarding the quality of the water at the place of study.Keywords: Water quality; Eutrophication; Island of Maranhão. RESUMENBrasil tiene gran disponibilidad de agua dulce en sus manantiales. Parte de este recurso es el río Paciencia, ubicado en la isla de Maranhão, que destaca por su importancia local, principalmente porque contribuye con sus aguas a recargar las fuentes subterráneas, fuente de suministro público de varios barrios de São Luís, capital del estado. Sin embargo, este río se ha visto afectado por la calidad de sus aguas, como consecuencia del proceso de uso y ocupación de los espacios en su cuenca. Destacando como uno de los principales problemas relacionados con la calidad de los ambientes fluviales, la eutrofización, que consiste en el proceso en el que el cuerpo de agua adquiere altos niveles de nutrientes (fosfatos y nitratos), es un indicador determinante de la calidad del agua. En este sentido, el objetivo de este trabajo fue caracterizar la calidad del agua y el estado trófico en la cuenca del río Paciência a través de los parámetros fisicoquímicos, mostrando las secciones más comprometidas de acuerdo con los valores alcanzados en los análisis. Los resultados de los análisis se compararon con CONAMA N°. 357/05, que indicó una situación preocupante con respecto a la calidad del agua en el sitio de estudio.Palabras clave: Calidad del agua; Eutrofización, Isla Maranhão.

Phamacognostical and Pharmaceutical Evaluation of Chandrashakaladi Vataka - A herbal formulation

2016 ◽  
Vol 1 (3) ◽  
Author(s):  
Dr. Akash S Changole ◽  
Mandip Goyal ◽  
Harish CR
Keyword(s):  
Classical Method ◽  
Raw Materials ◽  
Herbal Medicines ◽  
Vital Role ◽  
Published Data ◽  
Herbal Formulation ◽  
Physico Chemical ◽  
Good Manufacturing Practices ◽  
Solvent Systems

Background: Quality control and the standardization of herbal medicines involve steps like standard source and quality of raw materials, good manufacturing practices and adequate analytical screening. These practices play a vital role in guaranting the quality and stability of herbal preparations. Chandrashakaladi Vataka is an Ayurvedic herbal formulation mentioned to be beneficial in Kushtha. Till date no published data is available on its analytical profile. Aim: To develop the Pharmacognostical and Phyto-chemical profile of Chandrashakaladi Vataka. Material and Methods: Chandrashakaladi Vataka was prepared as per classical method and analytical findings were recorded. Samples were subjected to organoleptic analysis, physico-chemical analysis and HPTLC examination by optimizing the solvent systems. Results and Conclusions: Pharmacognostical profile of Chandrashakaladi Vataka was established. Loss on drying, Ash value, Acid insoluble extract, Methanol soluble extract, Chandrashakaladi Vataka was found within prescribed limits. HPTLC profile of Chandrashakaladi Vataka revealed 12 spots at 254 nm and 13 spots at 366 nm.

A Framework for Non-Nominal Visualization and Perceived Quality Evaluation

2011 ◽  
Author(s):  
Ola Wagersten ◽  
Karin Forslund ◽  
Casper Wickman ◽  
Rikard So¨derberg
Keyword(s):  
Industrial Process ◽  
Perceived Quality ◽  
Product Development Process ◽  
Functional Quality ◽  
Quality Aspects ◽  
System Solution ◽  
Comprehensive Framework ◽  
Variation Simulation ◽  
Support Evaluation

Perceived Quality clusters different aspects that influence the customer’s perception of non-functional quality on a product that are perceive through senses. All together those aspects and the harmony between them reflect the producer’s ability to control product parameters and thereby also mirror the functional quality of the product. High Perceived Quality cannot be added to the product at the end of the developing process. Project prerequisites, system solution, factory capability etc. are criterion to succeed. Therefore, it is important to be able to evaluate Perceived Quality early in the process when product system solutions and architecture are defined, although data maturity is low. This paper presents a comprehensive framework to manage and support evaluation of Perceived Quality aspects in a product development process. The framework is based on an industrial process in combination with recent research within the field. The framework focuses on activities that can be performed at different stages in the developing process based on maturity of the CAD or styling data. For example, if the styling data is divided into different components by split-lines it has reached higher level of maturity then styling data that not has been divided. Consequently, the choice of applied method is based on data maturity, regardless phase in the developing process. The framework contains methods based on several different simulation and analysis techniques. Design methods, Computer-Aided Tolerancing and FEA based non-rigid variation simulation are represented in the framework.

scholarly journals Quality of beef diaphragm meat in naturally occurring Sarcocystic infection in cattle

2018 ◽  
Vol 36 (No. 5) ◽  
pp. 378-385
Author(s):  
Vytautas Januskevicius ◽  
Grazina Januskeviciene ◽  
Gintare Zaborskiene
Keyword(s):  
Meat Quality ◽  
Harmful Effect ◽  
Coliform Bacteria ◽  
E Coli ◽  
Noticeable Increase ◽  
Physico Chemical ◽  
Infected Meat ◽  
Technological Quality ◽  
Meat Samples

The aim of this study was to investigate the possible harmful effect of Sarcocystis parasites on bovine diaphragm meat quality. Meat samples were collected from 120 bulls aged 20–24 months. Meat quality was investigated using microbiological and physico-chemical (RP-HPLC, GC) methods 48 hours after slaughter. Sarcocystis infection was associated with increased fat content, lightness L* and drip loss, and decreased ash and protein percentages. Infection also had a significant effect on the amount of amino acids (AAs), which slowly decreased as the number of sarcocysts increased. The total amount of AAs correlated with glutamic acid content (R = 0.966, P &lt; 0.05). Heavily infected samples contained significantly lower amounts of putrescine, histamine, spermine and spermidine (P &lt; 0.05) and<br /> a noticeable increase in the total count of aerobic microorganisms, but no change in the numbers of E. coli and coliform bacteria in comparison with no infected samples. Sarcocysts in beef diaphragms did not cause serious changes in the technological quality of the meat, but the biological quality of infected meat was reduced.  

scholarly journals Microencapsulation of Flaxseed Oil—State of Art

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 295
Author(s):  
Asma Yakdhane ◽  
Sabrine Labidi ◽  
Donia Chaabane ◽  
Anita Tolnay ◽  
Arijit Nath ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Gum Arabic ◽  
Tween 80 ◽  
Flaxseed Oil ◽  
Review Article ◽  
Wall Material ◽  
Physico Chemical ◽  
Comprehensive Information ◽  
The Matrix

Microencapsulation is a well-known technology for the lipid delivery system. It prevents the oxidation of fatty acids and maintains the quality of lipid after extraction from oil seed and processing. In flaxseed oil, the amount of ω-3 and ω-6 polyunsaturated fatty acids are 39.90–60.42% and 12.25–17.44%, respectively. A comprehensive review article on the microencapsulation of flaxseed oil has not been published yet. Realizing the great advantages of flaxseed oil, information about different technologies related to the microencapsulation of flaxseed oil and their characteristics are discussed in a comprehensive way, in this review article. To prepare the microcapsule of flaxseed oil, an emulsion of oil-water is performed along with a wall material (matrix), followed by drying with a spray-dryer or freeze-dryer. Different matrices, such as plant and animal-based proteins, maltodextrin, gum Arabic, and modified starch are used for the encapsulation of flaxseed oil. In some cases, emulsifiers, such as Tween 80 and soya lecithin are used to prepare flaxseed oil microcapsules. Physico-chemical and bio-chemical characteristics of flaxseed oil microcapsules depend on process parameters, ratio of oil and matrix, and characteristics of the matrix. As an example, the size of the microcapsule, prepared with spray-drying and freeze-drying ranges between 10–400 and 20–5000 μm, respectively. It may be considered that the comprehensive information on the encapsulation of flaxseed oil will boost the development of functional foods and biopharmaceuticals.

Sign in / Sign up

Export Citation Format

Share Document