scholarly journals One-pot synthesis of oxazolidinones and five-membered cyclic carbonates from epoxides and chlorosulfonyl isocyanate: theoretical evidence for an asynchronous concerted pathway

2020 ◽  
Vol 16 ◽  
pp. 1805-1819
Author(s):  
Esra Demir ◽  
Ozlem Sari ◽  
Yasin Çetinkaya ◽  
Ufuk Atmaca ◽  
Safiye Sağ Erdem ◽  
...  
Keyword(s):  
Potential Energy Surfaces ◽  
Density Functional ◽  
Cycloaddition Reaction ◽  
Reaction Times ◽  
Dft Method ◽  
Synthetic Approach ◽  
Cyclic Carbonates ◽  
One Pot ◽  
Purification Method ◽  
Chlorosulfonyl Isocyanate

The one-pot reaction of chlorosulfonyl isocyanate (CSI) with epoxides having phenyl, benzyl and fused cyclic alkyl groups in different solvents under mild reaction conditions without additives and catalysts was studied. Oxazolidinones and five-membered cyclic carbonates were obtained in ratios close to 1:1 in the cyclization reactions. The best yields of these compounds were obtained in dichloromethane (DCM). Together with 16 known compounds, two novel oxazolidinone derivatives and two novel cyclic carbonates were synthesized with an efficient and straightforward method. Compared to the existing methods, the synthetic approach presented here provides the following distinct advantageous: being a one-pot reaction with metal-free reagent, having shorter reaction times, good yields and a very simple purification method. Moreover, using the density functional theory (DFT) method at the M06-2X/6-31+G(d,p) level of theory the mechanism of the cycloaddition reactions has been elucidated. The further investigation of the potential energy surfaces associated with two possible channels leading to oxazolidinones and five-membered cyclic carbonates disclosed that the cycloaddition reaction proceeds via an asynchronous concerted mechanism in gas phase and in DCM.

scholarly journals One-Pot Synthesis of Oxazolidinones and Five-Membered Cyclic Carbonates from Epoxides and Chlorosulfonyl isocyanate: Theoretical Evidence for the Asynchronous Concerted Pathway

2020 ◽  
Author(s):  
Esra Demir ◽  
Özlem Sarı ◽  
Yasin Çetinkaya ◽  
Ufuk Atmaca ◽  
Safiye Sağ Erdem ◽  
...  
Keyword(s):  
Potential Energy Surfaces ◽  
Density Functional ◽  
Cycloaddition Reaction ◽  
Reaction Times ◽  
Dft Method ◽  
Cyclic Carbonates ◽  
One Pot ◽  
Purification Method ◽  
Chlorosulfonyl Isocyanate ◽  
The One

The one-pot reaction of chlorosulfonyl isocyanate (CSI) with epoxides having substituted phenyl, benzyl and fused cyclic alkyl groups in different solvents under mild reaction conditions without additives and catalysts was studied. Oxazolidinones and five-membered cyclic carbonates were obtained with a ratio close to (1:1) in the cyclization reactions. The best reaction conversion for the synthesis of these compounds was carried out in dichloromethane (DCM). The method presented here has distinct advantageous over the existing methods such as one-pot reaction, shorter reaction times, metal-free reagent, good yields and very simple purification method. The mechanism for the cycloaddition reactions has been elucidated using density functional theory (DFT) method at the M06-2X/6-31+G(d,p) level. The investigation of the potential energy surfaces associated with two possible channels leading to oxazolidinones and five-membered cyclic carbonates revealed that the cycloaddition reaction takes place through an asynchronous concerted mechanism in gas phase and in DCM.

Regio- and Diastereoselective Synthesis of Novel Polycyclic Pyrrolo[2,1-a]isoquinolines Bearing Indeno[1,2-b]quinoxaline Moieties by a Three-Component [3+2]-Cycloaddition Reaction

Synlett ◽  
2019 ◽  
Vol 31 (03) ◽  
pp. 267-271 ◽  
Author(s):  
Firouz Matloubi Moghaddam ◽  
Atiyeh Moafi ◽  
Behzad Jafari ◽  
Alexander Vilinger ◽  
Peter Langer
Keyword(s):  
Cycloaddition Reaction ◽  
Reaction Times ◽  
Dipolar Cycloaddition ◽  
Diastereoselective Synthesis ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
One Pot ◽  
Three Component Reaction ◽  
Relative Stereochemistry ◽  
High Yields

A regio- and diastereoselective synthesis of 2,3-dihydro-10b′H-spiro[indeno[1,2-b]quinoxaline-11,1′-pyrrolo[2,1-a]isoquinoline]-2′,3′-diylbis(phenylmethanone) derivatives containing four contiguous chiral stereocenters was achieved through 1,3-dipolar cycloaddition of isoquinolinium N-ylides in a one-pot three-component reaction. The desired products were obtained in short reaction times and in moderate to high yields (up to 92%) under relatively mild reaction conditions. The structure and relative stereochemistry of the desired product was confirmed by X-ray diffraction analysis.

scholarly journals [Bmim]Br Accelerated One-Pot Three-Component Cascade Protocol for the Construction of Spirooxindole–Pyrrolidine Heterocyclic Hybrids

Molecules ◽  
2020 ◽  
Vol 25 (20) ◽  
pp. 4779 ◽  
Author(s):  
Raju Suresh Kumar ◽  
Dhaifallah M. Al-thamili ◽  
Abdulrahman I. Almansour ◽  
Natarajan Arumugam ◽  
Necmi Dege
Keyword(s):  
Reaction Rate ◽  
Cycloaddition Reaction ◽  
Reaction Medium ◽  
Azomethine Ylide ◽  
Dipolar Cycloaddition ◽  
Synthetic Approach ◽  
One Pot ◽  
Short Reaction Time ◽  
Phenyl Alanine

Our synthetic approach for the assembly of structurally complex spirooxindole heterocyclic hybrids was based on an ionic liquid, [bmim]Br mediated one-pot three-component cascade reaction strategy involving 1,3-dipolar cycloaddition reaction of N-1-(2-pyridinylmethyl)-3,5-bis[(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones and azomethine ylide generated in situ from isatin and L-phenyl alanine, affording a series of spirooxindole–pyrrolidine heterocyclic hybrids in good-to-excellent yields. In addition to serving as the reaction medium, [bmim]Br also functioned as a catalyst in this cycloaddition reaction and hence accelerated the reaction rate affording the cycloadducts in short reaction time.

uMBD: A Materials-Ready Dispersion Correction that Uniformly Treats Metallic, Ionic, Covalent, and van der Waals Bonding

2019 ◽  
Author(s):  
Minho Kim ◽  
won june kim ◽  
Tim Gould ◽  
Eok Kyun Lee ◽  
Sébastien Lebègue ◽  
...  
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Electrode Materials ◽  
Full Range ◽  
Van Der Waals ◽  
Dft Method ◽  
Dispersion Correction ◽  
Computational Overhead ◽  
System A ◽  
Battery Design

<p>Materials design increasingly relies on first-principles calculations for screening important candidates and for understanding quantum mechanisms. Density functional theory (DFT) is by far the most popular first-principles approach due to its efficiency and accuracy. However, to accurately predict structures and thermodynamics, DFT must be paired with a van der Waals (vdW) dispersion correction. Therefore, such corrections have been the subject of intense scrutiny in recent years. Despite significant successes in organic molecules, no existing model can adequately cover the full range of common materials, from metals to ionic solids, hampering the applications of DFT for modern problems such as battery design. Here, we introduce a universally optimized vdW-corrected DFT method that demonstrates an unbiased reliability for predicting molecular, layered, ionic, metallic, and hybrid materials without incurring a large computational overhead. We use our method to accurately predict the intercalation potentials of layered electrode materials of a Li-ion battery system – a problem for which the existing state-of-the-art methods fail. Thus, we envisage broad use of our method in the design of chemo-physical processes of new materials.</p>

Chlorosulfonic Acid Supported Piperidine-4-carboxylic Acid (PPCA) Functionalized Fe3O4 Nanoparticles (Fe3O4-PPCA): The Efficient, Green and Reusable Nanocatalyst for the Synthesis of Pyrazolyl Coumarin Derivatives under Solvent-Free Conditions

2019 ◽  
Vol 22 (2) ◽  
pp. 123-128
Author(s):  
Setareh Habibzadeh ◽  
Hassan Ghasemnejad-Bosra ◽  
Mina Haghdadi ◽  
Soheila Heydari-Parastar
Keyword(s):  
Carboxylic Acid ◽  
Fe3o4 Nanoparticles ◽  
High Efficiency ◽  
Reaction Times ◽  
Chlorosulfonic Acid ◽  
Aromatic Aldehydes ◽  
Solvent Free ◽  
Magnetic Nanocatalyst ◽  
One Pot ◽  
Solvent Free Conditions

Background: In this study, we developed a convenient methodology for the synthesis of coumarin linked to pyrazolines and pyrano [2,3-h] coumarins linked to 3-(1,5-diphenyl-4,5- dihydro-1H-pyrazol-3-yl)-chromen-2-one derivatives using Chlorosulfonic acid supported Piperidine-4-carboxylic acid (PPCA) functionalized Fe3O4 nanoparticles (Fe3O4-PPCA) catalyst. Materials and Methods:: Fe3O4-PPCA was investigated as an efficient and magnetically recoverable Nanocatalyst for the one-pot synthesis of substituted coumarins from the reaction of coumarin with a variety of aromatic aldehydes in high to excellent yield at room temperature under solvent-free conditions. The magnetic nanocatalyst can be easily recovered by applying an external magnet device and reused for at least 10 reaction runs without considerable loss of reactivity. Results and Conclusion: The advantages of this protocol are the use of commercially available materials, simple and an inexpensive procedure, easy separation, and an eco-friendly procedure, and it shows good reaction times, good to high yields, inexpensive and practicability procedure, and high efficiency.

Synthesis of Highly Functionalized Quinazoline-2,4(1H,3H)-diones from Isocyanides, Aniline and Isocyanate via Cu-Catalyzed Intermolecular C-H Activation Reactions

2020 ◽  
Vol 17 (11) ◽  
pp. 832-836
Author(s):  
Manijeh Nematpour ◽  
Hossein Fasihi Dastjerdi ◽  
Mehdi Jahani ◽  
Sayyed Abbas Tabatabai
Keyword(s):  
13C Nmr ◽  
Reaction Times ◽  
High Yield ◽  
One Pot ◽  
1H And 13C Nmr ◽  
Activation Reaction ◽  
Elemental Analyses

A simple and appropriate procedure for the synthesis of quinazoline-2,4(1H,3H)-dione derivatives from isocyanides, aniline and isocyanate via the Cu-catalyzed intramolecular C-H activation reaction is reported. The advantages of this method are one-pot conditions, accessible starting materials- catalyst, high yield of products, and short reaction times. The structures are confirmed spectroscopically (1H- and 13C-NMR, IR and EI-MS) and by elemental analyses.

Copper-catalyzed Convenient Synthesis and SAR Studies of Substituted-1,2,3-triazole as Antimicrobial Agents

2018 ◽  
Vol 16 (1) ◽  
pp. 3-10
Author(s):  
Aniket P. Sarkate ◽  
Kshipra S. Karnik ◽  
Pravin S. Wakte ◽  
Ajinkya P. Sarkate ◽  
Ashwini V. Izankar ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Antifungal Activity ◽  
Antimicrobial Agents ◽  
Cycloaddition Reaction ◽  
Dipolar Cycloaddition ◽  
One Pot ◽  
Triazole Derivatives ◽  
Sar Studies ◽  
Convenient Synthesis ◽  
Antibacterial And Antifungal

Background:A novel copper-catalyzed synthesis of substituted-1,2,3-triazole derivatives has been developed and performed by Huisgen 1,3-dipolar cycloaddition reaction of azides with alkynes. The reaction is one-pot multicomponent.Objective:We state the advancement and execution of a methodology allowing for the synthesis of some new substituted 1,2,3-triazole analogues with antimicrobial activity.Methods:A series of triazole derivatives was synthesized by Huisgen 1,3-dipolar cycloaddition reaction of azides with alkynes. The structures of the synthesized compounds were elucidated and confirmed by 1H NMR, IR, MS and elemental analysis. All the synthesized compounds were tested for their antimicrobial activity against a series of strains of Bacillus subtilis, Staphylococcus aureus and Escherichia coli for antibacterial activity and against the strains of Candida albicans, Aspergillus flavus and Aspergillus nigar for antifungal activity, respectively.Results and Conclusion:From the antimicrobial data, it was observed that all the newly synthesized compounds showed good to moderate level of antibacterial and antifungal activity.

Microwave-accelerated Carbon-carbon and Carbon-heteroatom Bond Formation via Multi-component Reactions: A Brief Overview

2020 ◽  
Vol 7 (1) ◽  
pp. 23-39 ◽  
Author(s):  
Kantharaju Kamanna ◽  
Santosh Y. Khatavi
Keyword(s):  
Organic Synthesis ◽  
Bond Formation ◽  
Cycloaddition Reaction ◽  
Nanoparticle Synthesis ◽  
Single Step ◽  
Bioactive Molecules ◽  
One Pot ◽  
Bond Forming ◽  
Material Interest ◽  
Carbon Carbon Bond

Multi-Component Reactions (MCRs) have emerged as an excellent tool in organic chemistry for the synthesis of various bioactive molecules. Among these, one-pot MCRs are included, in which organic reactants react with domino in a single-step process. This has become an alternative platform for the organic chemists, because of their simple operation, less purification methods, no side product and faster reaction time. One of the important applications of the MCRs can be drawn in carbon- carbon (C-C) and carbon-heteroatom (C-X; X = N, O, S) bond formation, which is extensively used by the organic chemists to generate bioactive or useful material synthesis. Some of the key carbon- carbon bond forming reactions are Grignard, Wittig, Enolate alkylation, Aldol, Claisen condensation, Michael and more organic reactions. Alternatively, carbon-heteroatoms containing C-N, C-O, and C-S bond are also found more important and present in various heterocyclic compounds, which are of biological, pharmaceutical, and material interest. Thus, there is a clear scope for the discovery and development of cleaner reaction, faster reaction rate, atom economy and efficient one-pot synthesis for sustainable production of diverse and structurally complex organic molecules. Reactions that required hours to run completely in a conventional method can now be carried out within minutes. Thus, the application of microwave (MW) radiation in organic synthesis has become more promising considerable amount in resource-friendly and eco-friendly processes. The technique of microwaveassisted organic synthesis (MAOS) has successfully been employed in various material syntheses, such as transition metal-catalyzed cross-coupling, dipolar cycloaddition reaction, biomolecule synthesis, polymer formation, and the nanoparticle synthesis. The application of the microwave-technique in carbon-carbon and carbon-heteroatom bond formations via MCRs with major reported literature examples are discussed in this review.

scholarly journals First Attempts of the Use of 195Pt NMR of Phenylbenzothiazole Complexes as Spectroscopic Technique for the Cancer Diagnosis

Molecules ◽  
2019 ◽  
Vol 24 (21) ◽  
pp. 3970 ◽  
Author(s):  
Bruna T. L. Pereira ◽  
Mateus A. Gonçalves ◽  
Daiana T. Mancini ◽  
Kamil Kuca ◽  
Teodorico C. Ramalho
Keyword(s):  
Cancer Treatment ◽  
Cancer Diagnosis ◽  
Density Functional ◽  
Chemical Shifts ◽  
Chloride Ion ◽  
Platinum Complexes ◽  
Dft Method ◽  
Ion Concentration ◽  
Implicit Solvent ◽  
Early Cancer Diagnosis

Platinum complexes have been studied for cancer treatment for several decades. Furthermore, another important platinum characteristic is related to its chemical shifts, in which some studies have shown that the 195Pt chemical shifts are very sensitive to the environment, coordination sphere, and oxidation state. Based on this relevant feature, Pt complexes can be proposed as potential probes for NMR spectroscopy, as the chemical shifts values will be different in different tissues (healthy and damaged) Therefore, in this paper, the main goal was to investigate the behavior of Pt chemical shifts in the different environments. Calculations were carried out in vacuum, implicit solvent, and inside the active site of P13K enzyme, which is related with breast cancer, using the density functional theory (DFT) method. Moreover, the investigation of platinum complexes with a selective moiety can contribute to early cancer diagnosis. Accordingly, the Pt complexes selected for this study presented a selective moiety, the 2-(4′aminophenyl)benzothiazole derivative. More specifically, two Pt complexes were used herein: One containing chlorine ligands and one containing water in place of chlorine. Some studies have shown that platinum complexes coordinated to chlorine atoms may suffer hydrolyses inside the cell due to the low chloride ion concentration. Thus, the same calculations were performed for both complexes. The results showed that both complexes presented different chemical shift values in the different proposed environments. Therefore, this paper shows that platinum complexes can be a potential probe in biological systems, and they should be studied not only for cancer treatment, but also for diagnosis.

scholarly journals Highly Efficient MOF Catalyst Systems for CO2 Conversion to Bis-Cyclic Carbonates as Building Blocks for NIPHUs (Non-Isocyanate Polyhydroxyurethanes) Synthesis

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 628
Author(s):  
Adolfo Benedito ◽  
Eider Acarreta ◽  
Enrique Giménez
Keyword(s):  
Molar Mass ◽  
Cycloaddition Reaction ◽  
Building Blocks ◽  
Catalyst System ◽  
Cyclic Carbonate ◽  
Ammonium Bromide ◽  
Cyclic Carbonates ◽  
High Molar Mass ◽  
Highly Efficient ◽  
Free Process

The present paper describes a greener sustainable route toward the synthesis of NIPHUs. We report a highly efficient solvent-free process to produce [4,4′-bi(1,3-dioxolane)]-2,2′-dione (BDC), involving CO2, as renewable feedstock, and bis-epoxide (1,3-butadiendiepoxide) using only metal–organic frameworks (MOFs) as catalysts and cetyltrimethyl-ammonium bromide (CTAB) as a co-catalyst. This synthetic procedure is evaluated in the context of reducing global emissions of waste CO2 and converting CO2 into useful chemical feedstocks. The reaction was carried out in a pressurized reactor at pressures of 30 bars and controlled temperatures of around 120–130 °C. This study examines how reaction parameters such as catalyst used, temperature, or reaction time can influence the molar mass, yield, or reactivity of BDC. High BDC reactivity is essential for producing high molar mass linear non-isocyanate polyhydroxyurethane (NIPHU) via melt-phase polyaddition with aliphatic diamines. The optimized Al-OH-fumarate catalyst system described in this paper exhibited a 78% GC-MS conversion for the desired cyclic carbonates, in the absence of a solvent and a 50 wt % chemically fixed CO2. The cycloaddition reaction could also be carried out in the absence of CTAB, although lower cyclic carbonate yields were observed.

Sign in / Sign up

Export Citation Format

Share Document