scholarly journals High temperature mud system for deep well drilling in Japan.

1993 ◽  
Vol 58 (5) ◽  
pp. 387-392
Author(s):  
Sunao Konno
Keyword(s):  
High Temperature ◽  
Well Drilling ◽  
Deep Well

Study of Drilling Fluid System of Resisting the High Temperature of 220 Degrees

2013 ◽  
Vol 753-755 ◽  
pp. 130-133
Author(s):  
Hui Hong Luo ◽  
Ze Hua Wang ◽  
Yu Xue Sun ◽  
Han Jiang
Keyword(s):  
High Temperature ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Borehole Stability ◽  
Fluid System ◽  
Well Drilling ◽  
Deep Well ◽  
Materials Used ◽  
Loss Control ◽  
Determine System

Focus on the high temperature rheological stability and the fluid loss control of resistance to high temperature drilling fluid system, further determine system formula and the formula of the high temperature drilling fluid system should be optimized. Eventually, a kind of organo-silica drilling fluid system of excellent performance which is resistant to high temperature of 220 degrees has been developed, and the system performances have been evaluated. The high temperature-resistant organo-silica drilling fluid system is of good shale inhibition, lubricity and borehole stability. The fluid loss is low and the filter cake is thin and tight, which can effectively prevent bit balling. The sand-carrying ability is good and the rheological property is easy to control. The performances of drilling fluid remain stable under high salinity and the system can resist the pollution of 6%NaCl and 0.5%CaC12. The materials used in this system are non-toxic, non-fluorescent and suitable for deep well drilling.

scholarly journals Propagation of Measurement-While-Drilling Mud Pulse during High Temperature Deep Well Drilling Operations

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Hongtao Li ◽  
Yingfeng Meng ◽  
Gao Li ◽  
Na Wei ◽  
Jiajie Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
Angular Frequency ◽  
Drill String ◽  
Linear Perturbation ◽  
State Equations ◽  
Attenuation Coefficients ◽  
Well Drilling ◽  
Deep Well ◽  
Measurement While Drilling ◽  
Density Behavior

Signal attenuates while Measurement-While-Drilling (MWD) mud pulse is transmited in drill string during high temperature deep well drilling. In this work, an analytical model for the propagation of mud pulse was presented. The model consists of continuity, momentum, and state equations with analytical solutions based on the linear perturbation analysis. The model can predict the wave speed and attenuation coefficient of mud pulse. The calculated results were compared with the experimental data showing a good agreement. Effects of the angular frequency, static velocity, mud viscosity, and mud density behavior on speed and attenuation coefficients were included in this paper. Simulated results indicate that the effects of angular frequency, static velocity, and mud viscosity are important, and lower frequency, viscosity, and static velocity benefit the transmission of mud pulse. Influenced by density behavior, the speed and attenuation coefficients in drill string are seen to have different values with respect to well depth. For different circulation times, the profiles of speed and attenuation coefficients behave distinctly different especially in lower section. In general, the effects of variables above on speed are seen to be small in comparison.

Effects of Microstructure Evolution on High-Temperature Mechanical Deformation of 95Sn-5Sb

2008 ◽  
Author(s):  
Harry Schoeller ◽  
Shubhra Bansal ◽  
Aaron Knobloch ◽  
David Shaddock ◽  
Junghyun Cho
Keyword(s):  
High Temperature ◽  
Lead Free ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Second Phase ◽  
Creep Tests ◽  
Well Drilling ◽  
Deep Well ◽  
High Homologous Temperature ◽  
Lead Free Solders

Lead-free solders have garnered much attention in recent years due to legislation banning the use of lead in electronics. As use of lead solders is phased out, there is a need for lead-free alternatives for niche applications such as high temperature environments where traditionally high lead solders are used. Electronics and sensors exposed to high-temperature environments such as those associated with deep well drilling require solder interconnects that can withstand high thermal-mechanical stresses. In an effort to characterize solder alloys for such applications, this study focuses on deformation behavior of the Sn95-Sb5 solder under high-temperature exposures (from 298°K to 473°K). As compared to conventional high-temperature Pb-based solder 90Pb–10Sn, Sn95–Sb5 exhibited very high tensile strength and modulus, as well as superior creep properties despite its lower melting temperature. Importantly, high-temperature deformation was shown to be influenced by the presence of the second phase (SnSb) distributed within the Sn-rich matrix. These second phase precipitates appeared to be dissolved into the Sn-rich phase above 453°K, which converted the solder into a single-phase alloy and resulted in a change in its deformation mechanism. Furthermore, as the service temperature is of such high homologous temperature (T > 0.5Tm), creep deformation will contribute significantly toward the life of the solder joint during thermal cycling. In order to characterize the creep behavior and to identify controlling mechanism(s), creep tests were carried out, from which the stress exponent and activation energy were determined. In this study, detailed microstructures under high-temperature are presented in conjunction with the corresponding mechanical behavior to further understand the controlling deformation mechanisms.

Study on Multi-Functional Experimental Apparatus for the Performance Evaluation of HTHP Drilling Fluid

2011 ◽  
Vol 422 ◽  
pp. 10-16
Author(s):  
Fu Hua Wang ◽  
Rui He Wang ◽  
Xue Chao Tan
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Drilling Fluid ◽  
Dynamic State ◽  
Mechanical Transmission ◽  
Well Drilling ◽  
New Device ◽  
Deep Well ◽  
Experimental Apparatus ◽  
New Apparatus

With the development of deep well drilling technology, a new HTHP (High Temperature High Pressure) experimental apparatus LH-1 was developed to meet the need of research and evaluation of deep well drilling fluid. With the advanced dynamic seal technology, mechanical transmission and data sensing technology, this new apparatus has many kinds of HTHP testing functions in a body and could evaluate manifold performances at the dynamic state of high temperature and high pressure including HTHP dynamic or static filtration test, high temperature dynamic scattering test of drilling cuttings, HTHP dynamic sealing and plugging tests, ultra HTHP aging test and so on. The lab tests show that the new apparatus gains such advantages as novelty of the design, stability of the performance, accuracy and reliability of the experimental data and facility of the operation. Having overcome the defections of the old apparatuses, the new device can provide a new means of experimental researches for the evaluation of HTHP comprehensive performance of deep well drilling fluid.

Pipe stick problems of deep well drilling

2021 ◽  
Vol 66 (05) ◽  
pp. 192-195
Author(s):  
Rövşən Azər oğlu İsmayılov ◽  
Keyword(s):  
Drilling Fluid ◽  
Drill Pipe ◽  
Drill String ◽  
Differential Pressure ◽  
Drilling Mud ◽  
Fluid Circulation ◽  
Well Drilling ◽  
Deep Well ◽  
Pressure Pipe ◽  
Bottomhole Pressure

The aricle is about the pipe stick problems of deep well drilling. Pipe stick problem is one of the drilling problems. There are two types of pipe stick problems exist. One of them is differential pressure pipe sticking. Another one of them is mechanical pipe sticking. There are a lot of reasons for pipe stick problems. Indigators of differential pressure sticking are increase in torque and drug forces, inability to reciprocate drill string and uninterrupted drilling fluid circulation. Key words: pipe stick, mecanical pipe stick,difference of pressure, drill pipe, drilling mud, bottomhole pressure, formation pressure

The Feasibility for Potassium-Based Phosphate Brines To Serve as High-Density Solid-Free Well-Completion Fluids in High-Temperature/High-Pressure Formations

SPE Journal ◽  
2018 ◽  
Vol 24 (05) ◽  
pp. 2033-2046 ◽  
Author(s):  
Hu Jia ◽  
Yao–Xi Hu ◽  
Shan–Jie Zhao ◽  
Jin–Zhou Zhao
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Oil And Gas ◽  
Pressure Coefficient ◽  
High Density ◽  
Well Drilling ◽  
Well Completion ◽  
Oil And Gas Resources ◽  
Completion Fluids ◽  
High Temperature High Pressure

Summary Many oil and gas resources in deep–sea environments worldwide are often located in high–temperature/high–pressure (HT/HP) and low–permeability reservoirs. The reservoir–pressure coefficient usually exceeds 1.6, with formation temperature greater than 180°C. Challenges are faced for well drilling and completion in these HT/HP reservoirs. A solid–free well–completion fluid with safety density greater than 1.8 g/cm3 and excellent thermal endurance is strongly needed in the industry. Because of high cost and/or corrosion and toxicity problems, the application of available solid–free well–completion fluids such as cesium formate brines, bromine brines, and zinc brines is limited in some cases. In this paper, novel potassium–based phosphate well–completion fluids were developed. Results show that the fluid can reach the maximum density of 1.815 g/cm3 at room temperature, which makes a breakthrough on the density limit of normal potassium–based phosphate brine. The corrosion rate of N80 steel after the interaction with the target phosphate brine at a high temperature of 180°C is approximately 0.1853 mm/a, and the regained–permeability recovery of the treated sand core can reach up to 86.51%. Scanning–electron–microscope (SEM) pictures also support the corrosion–evaluation results. The phosphate brine shows favorable compatibility with the formation water. The biological toxicity–determination result reveals that it is only slightly toxic and is environmentally acceptable. In addition, phosphate brine is highly effective in inhibiting the performance of clay minerals. The cost of phosphate brine is approximately 44 to 66% less than that of conventional cesium formate, bromine brine, and zinc brine. This study suggests that the phosphate brine can serve as an alternative high–density solid–free well–completion fluid during well drilling and completion in HT/HP reservoirs.

Design and Calibration of Resistive Stress Sensors on 4H Silicon Carbide

2018 ◽  
Author(s):  
Richard C. Jaeger ◽  
Jun Chen ◽  
Jeffrey C. Suhling ◽  
Leonid Fursin
Keyword(s):  
Silicon Carbide ◽  
Integrated Circuits ◽  
Stress Sensitivity ◽  
Well Drilling ◽  
Deep Well ◽  
Stress Sensors ◽  
Wide Range ◽  
Higher Temperature ◽  
Van Der Pauw ◽  
Transverse Piezoresistance

Stress sensors have shown potential to provide “health monitoring” of a wide range of issues related to packaging of integrated circuits, and silicon carbide offers the advantage of much higher temperature sensor operation with application in packaged high-voltage, high-power SiC devices as well as both automotive and aerospace systems, geothermal plants, and deep well drilling, to name a few. This paper discusses the theory and uniaxial calibration of resistive stress sensors on 4H silicon carbide (4H-SiC) and provides new theoretical descriptions for four-element resistor rosettes and van der Pauw (VDP) stress sensors. The results delineate the similarities and differences relative to those on (100) silicon: resistors on the silicon face of 4H-SiC respond to only four of the six components of the stress state; a four-element rosette design exists for measuring the in-plane stress components; two stress quantities can be measured in a temperature compensated manner. In contrast to silicon, only one combined coefficient is required for temperature compensated stress measurements. Calibration results from a single VDP device can be used to calculate the basic lateral and transverse piezoresistance coefficients for 4H-SiC material. Experimental results are presented for lateral and transverse piezoresistive coefficients for van der Pauw structures and p- and n-type resistors. The VDP devices exhibit the expected 3.16 times higher stress sensitivity than standard resistor rosettes.

Sign in / Sign up

Export Citation Format

Share Document