scholarly journals MECHANICAL BEHAVIOR OF BANANA REINFORCED EPOXY COMPOSITE BY FINITE ELEMENT METHOD

2021 ◽  
Author(s):  
Upendra Sharan Gupta ◽  
◽  
Sudhir Tiwari ◽  
Rajeev Namdeo ◽  
Siddhartha Chaturvedi ◽  
...  
Keyword(s):  
Finite Element ◽  
Impact Strength ◽  
Tensile Load ◽  
High Strength ◽  
Natural Fibres ◽  
Banana Fruit ◽  
Element Analysis ◽  
Binding Characteristics ◽  
Banana Fibre ◽  
The Impact

In the recent years, there is a shift in interest of engineers and researchers to natural fibres from synthetic fibres. Natural fibres have high strength, are light weight and are also inexpensive than the traditional synthetic fibres. In addition, the fibres obtained naturally are biodegradability and eco-friendly in nature. Banana fibre is a derived product by cultivation of banana fruit and thus plentiful in environment. Banana fibre is classified among the strongest naturally obtained fibre and therefore when reinforced with other few binding resins can be utilized for different applications. Epoxy resin are suitable matrix for composite creation since they have outstanding binding characteristics. The (FEA) Finite Element Analysis of epoxy-banana composite shows that the maximum value of impact, flexural and tensile load that the composite can bear is 1000 N, 900 N and 2100 N respectively. According to this investigation it can be concluded that because of their outstanding load bearing characteristics epoxy-banana composite can be utilized for several medium load industrial uses to high load industrial uses. It is observed that the composite with least volume percent of epoxy has better mechanical strength and can bear higher deformation under higher load for tensile and flexural tests and for the impact strength results, the increase in fibre % results in lower impact strength. Also, the increase in higher vol. % of epoxy results in lower stiffness and higher deflection in the specimens, except for the specimen with 40% vol. of epoxy which obtained the most optimal results.

Finite Element Analysis of Transverse Impact on a Woven Textile

2004 ◽  
Author(s):  
Yiping Duan ◽  
Michael Keefe ◽  
Travis A. Bogetti ◽  
Brian Powers
Keyword(s):  
Finite Element ◽  
Failure Modes ◽  
High Strength ◽  
Theoretical Work ◽  
Impact Behavior ◽  
Transverse Impact ◽  
Element Analysis ◽  
Distribution Energy ◽  
The Impact ◽  
Woven Textile

High-strength textiles are widely used in soft impact threat shield systems. During the past several decades, a lot of experiments and theoretical work were conducted to understand the transverse impact behavior of textile structures. As a continuation of those efforts, this paper presents finite element modeling of transverse impact of a rigid right circular cylinder into a square patch of plain-woven textile. Two boundary conditions are applied on the woven textile: four edges clamped; two opposite edges clamped and the other two edges left free. Results show that during the initial stage of the impact, there exists an abrupt momentum/energy transfer from the projectile to the local textile in the impact region. The modeling results also show that the textile boundary condition plays an important role in the impact. It significantly affects the textile transient deformation, stress distribution, energy absorption, and failure modes. The textile absorbs energy more quickly when all its four edges are clamped.

scholarly journals Potential and limitations of finite element modelling in assessing structural integrity of coralline algae under future global change

2015 ◽  
Vol 12 (19) ◽  
pp. 5871-5883 ◽  
Author(s):  
L. A. Melbourne ◽  
J. Griffin ◽  
D. N. Schmidt ◽  
E. J. Rayfield
Keyword(s):  
Climate Change ◽  
Finite Element ◽  
Structural Integrity ◽  
Geometric Model ◽  
Algal Growth ◽  
Coralline Algae ◽  
Rocky Shores ◽  
Element Analysis ◽  
Scan Data ◽  
The Impact

Abstract. Coralline algae are important habitat formers found on all rocky shores. While the impact of future ocean acidification on the physiological performance of the species has been well studied, little research has focused on potential changes in structural integrity in response to climate change. A previous study using 2-D Finite Element Analysis (FEA) suggested increased vulnerability to fracture (by wave action or boring) in algae grown under high CO2 conditions. To assess how realistically 2-D simplified models represent structural performance, a series of increasingly biologically accurate 3-D FE models that represent different aspects of coralline algal growth were developed. Simplified geometric 3-D models of the genus Lithothamnion were compared to models created from computed tomography (CT) scan data of the same genus. The biologically accurate model and the simplified geometric model representing individual cells had similar average stresses and stress distributions, emphasising the importance of the cell walls in dissipating the stress throughout the structure. In contrast models without the accurate representation of the cell geometry resulted in larger stress and strain results. Our more complex 3-D model reiterated the potential of climate change to diminish the structural integrity of the organism. This suggests that under future environmental conditions the weakening of the coralline algal skeleton along with increased external pressures (wave and bioerosion) may negatively influence the ability for coralline algae to maintain a habitat able to sustain high levels of biodiversity.

Study on the Local Buckling Behavior of Steel Equal Angle Members under Axial Compression with the Steel Strength Variation

2011 ◽  
Vol 374-377 ◽  
pp. 2430-2436
Author(s):  
Gang Shi ◽  
Zhao Liu ◽  
Yong Zhang ◽  
Yong Jiu Shi ◽  
Yuan Qing Wang
Keyword(s):  
Finite Element ◽  
Axial Compression ◽  
High Strength Steel ◽  
Local Buckling ◽  
Steel Structures ◽  
High Strength ◽  
Element Analysis ◽  
Equal Angle ◽  
Buckling Behavior ◽  
Steel Strength

High strength steel sections have been increasingly used in buildings and bridges, and steel angles have also been widely used in many steel structures, especially in transmission towers and long span trusses. However, high strength steel exhibits mechanical properties that are quite different from ordinary strength steel, and hence, the local buckling behavior of steel equal angle members under axial compression varies with the steel strength. However, there is a lack of research on the relationship of the local buckling behavior of steel equal angle members under axial compression with the steel strength. A finite element model is developed in this paper to analyze the local buckling behavior of steel equal angle members under axial compression, and study its relationship with the steel strength and the width-to-thickness ratio of the angle leg. The finite element analysis (FEA) results are compared with the corresponding design method in the American code AISC 360-05, which provides a reference for the related design.

Response of Mild Steel Pipes Under High Mass Low Velocity Impacts

2014 ◽  
Author(s):  
Shamsoon Fareed ◽  
Ian May
Keyword(s):  
Finite Element ◽  
Mild Steel ◽  
Impact Energy ◽  
High Mass ◽  
Low Velocity ◽  
Element Analysis ◽  
Steel Pipes ◽  
Impact Tests ◽  
The Finite Element Analysis ◽  
The Impact

Accidental loads, for example, due to heavy dropped objects, impact from the trawl gear and anchors of fishing vessels can cause damage to pipelines on the sea bed. The amount of damage will depend on the impact energy. The indentation will be localized at the contact area of the pipe and the impacting object, however, an understanding of the extent of the damage due to an impact is required so that if one should occur in practice an assessment can be made to determine if remedial action needs to be taken to ensure that the pipeline is still serviceable. There are a number of parameters, including the pipe cross section and impact energy, which influence the impact behaviour of a pipe. This paper describes the response, and assesses the damage, of mild steel pipes under high mass low velocity impacts. For this purpose full scale impacts tests were carried out on mild steel pipe having diameter of 457 mm, thickness of 25.4 mm and length of 2000 mm. The pipe was restrained along the base and a 2 tonnes mass with sharp impactor having a vertical downward velocity of 3870 mm/sec was used to impact the pipe transversely with an impact energy of 16 kJ. It was found from the impact tests that a smooth indentation was produced in the pipe. The impact tests were then used for validation of the non-linear dynamic implicit analyses using the finite element analysis software ABAQUS. Deformations at the impact zone, the rebound velocity, etc, recorded in the tests and the results of the finite element analysis were found to be in good agreement. The impact tests and finite element analyses described in this paper will help to improve the understanding of the response of steel pipes under impact loading and can be used as a benchmark for further finite element modelling of impacts on pipes.

Flexible Flowline Walking Tendency on Seabed With Longitudinal Undulations and Transverse Gradients

2018 ◽  
Author(s):  
Graeme Roberts ◽  
T. Sriskandarajah ◽  
Gianluca Colonnelli ◽  
Arnaud Roux ◽  
Alan Roy ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Gradients ◽  
Radius Of Curvature ◽  
Bend Radius ◽  
Lateral Buckling ◽  
Element Analysis ◽  
Slip Tendency ◽  
Start Ups ◽  
The Impact

A method of carrying out a combined axial walking and lateral buckling assessment for a flexible flowline has been developed using finite element analysis. The method overcomes limitations of screening assessments which could be inconclusive when applied either to a flexible flowline on an undulating seabed with transverse gradients or to one that buckles during hydrotest. Flexible flowlines that were to be surface-laid on a seabed with longitudinal undulations and transverse gradients were assessed using the method. The flexible flowlines were simulated in their as-laid state, and the simulation incorporated hydrotest pressure and the pressure & temperature gradients and transients associated with multiple start-ups. The objective was to quantify the axial walking and lateral slip tendency of the flexible flowlines and the impact that walking might have on the connected end structures. The lateral buckle locations predicted by finite element analysis were compared to a post-hydrotest survey and the radius of curvature from analysis was compared to the minimum bend radius of the flexible.

scholarly journals Finite Element Analysis on Behavior of Reinforced Hollow High Strength Concrete Filled Square Steel Tube Short Columns under Axial Compression

2021 ◽  
Vol 2101 (1) ◽  
pp. 012059
Author(s):  
Z J Yang ◽  
X Li ◽  
G C Li ◽  
S C Peng
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Strength Concrete ◽  
Mechanical Performance ◽  
Concrete Strength ◽  
High Strength ◽  
Steel Tube ◽  
Element Analysis ◽  
Steel Strength ◽  
Square Steel Tube

Abstract Hollow concrete-filled steel tubular (CFST) member is mainly adopted in power transmission and transformation structures, but when it is used in the superstructure with complex stress, the hollow CFST member has a low bearing capacity and is prone to brittle failure. To improve the mechanical performance of hollow CFST members, a new type of reinforced hollow high strength concrete-filled square steel tube (RHCFSST) was proposed, and its axial compression performance was researched. 18 finite element analysis (FEA) models of axially loaded RHCFSST stub columns were established through FEA software ABAQUS. The whole stress process of composite columns was studied, and parametric studies were carried out to analyze the mechanical performance of the member. Parameters of the steel strength, steel ratio, deformed bar and sandwich concrete strength were varied. Based on the simulation results, the stress process of members can be divided into four stages: elastic stage, elastoplastic stage, descending stage and gentle stage. With the increase of steel strength, steel ratio, the strength of sandwich concrete and the addition of deformed bars, the ultimate bearing capacity of members also increases. Additionally, the increment of those parameters will improve the ductility of the member, except for the sandwich concrete strength.

Sign in / Sign up

Export Citation Format

Share Document