scholarly journals Cultivation of Chlorella pyrenoidosa as a raw material for the production of biofuels in palm oil mill effluent medium with the addition of urea and triple super phosphate

2020 ◽  
Vol 7 (1) ◽  
pp. 1-6
Author(s):  
Shinta Elystia ◽  
Sri Rezeki Muria ◽  
Herta Furaida Erlangga
Keyword(s):  
Renewable Energy ◽  
Removal Efficiency ◽  
Palm Oil ◽  
Organic Materials ◽  
Renewable Energy Sources ◽  
Oxygen Demand ◽  
Chlorella Pyrenoidosa ◽  
Raw Material ◽  
Palm Oil Mill Effluent ◽  
Palm Oil Mill

Background: The utilization of microalgae as a renewable energy is an important aspect in solving shortage of future oil reserve in 15 years. One of the renewable energy sources is microalgae biodiesel. Palm oil mill effluent (POME) is a wastewater that has a high content of organic materials. These organic materials can be used as growth nutrients for microalgae. Chlorella pyrenoidosa is one of the most potential microalgae used as a raw material for the production of biodiesel since it contains lipids (8%-35%). Methods: Chlorella pyrenoidosa was cultured on the POME medium with concentrations of 0%, 25%, 50%, 75%, and 100%v with addition of synthetic nutrients (urea: TSP) at the ratios of 2:1 ; 1:2 ; 0.5:1 in a 500 mL Erlenmeyer flask, at pH 6-8, aeration using aquarium pumps, and using LED lights (3000 lux). Results: It was revealed that at POME concentration of 25% and with addition of urea: TSP at a ratio of 2:1, the optimum specific growth rate (0.306/day) with the highest number of cells was 3.530 × 107 cells/mL and the highest lipid content was 36% of its dry weight. The removal efficiency of POME could be obtained from the removal efficiency of chemical oxygen demand (COD), total nitrogen, and orthophosphate (P-PO4 ), which was 70, 90.42, and 81.12%, respectively. Conclusion: According to the results, under appropriate culture conditions, C. pyrenoidosa can produce lipids with good use of nutrients contained in the POME medium.

scholarly journals Phytoremediation Potential of Vetiver System Technology for Improving the Quality of Palm Oil Mill Effluent

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Negisa Darajeh ◽  
Azni Idris ◽  
Paul Truong ◽  
Astimar Abdul Aziz ◽  
Rosenani Abu Bakar ◽  
...  
Keyword(s):  
Palm Oil ◽  
Oxygen Demand ◽  
Raw Material ◽  
Biofuel Production ◽  
Palm Oil Mill Effluent ◽  
System Technology ◽  
High Concentration ◽  
Low Concentration ◽  
Control Sets ◽  
Palm Oil Mill

Palm oil mill effluent (POME), a pollutant produced by the palm oil industry, was treated by the Vetiver system technology (VST). This technology was applied for the first time to treat POME in order to decrease biochemical oxygen demand (BOD) and chemical oxygen demand (COD). In this study, two different concentrations of POME (low and high) were treated with Vetiver plants for 2 weeks. The results showed that Vetiver was able to reduce the BOD up to 90% in low concentration POME and 60% in high concentration POME, while control sets (without plant) only was able to reduce 15% of BOD. The COD reduction was 94% in low concentration POME and 39% in high concentration POME, while control just shows reduction of 12%. Morphologically, maximum root and shoot lengths were 70 cm, the number of tillers and leaves was 344 and 86, and biomass production was 4.1 kg m−2. These results showed that VST was effective in reducing BOD and COD in POME. The treatment in low concentration was superior to the high concentration. Furthermore, biomass of plant can be considered as a promising raw material for biofuel production while high amount of biomass was generated in low concentration of POME.

scholarly journals Pengembangan Potensi Energi Alternatif Dengan Pemanfaatan Limbah Cair Kelapa Sawit Sebagai Sumber Energi Baru Terbarukan Di Kabupaten Kotawaringin Timur

2016 ◽  
Vol 14 (2) ◽  
pp. 96 ◽  
Author(s):  
Yulian Mara Alkusma ◽  
Hermawan Hermawan ◽  
H Hadiyanto
Keyword(s):  
Renewable Energy ◽  
Chemical Oxygen Demand ◽  
Palm Oil ◽  
Oil Palm ◽  
Liquid Waste ◽  
Oxygen Demand ◽  
Electrical Energy ◽  
Palm Oil Mill Effluent ◽  
Environmental Disaster ◽  
Palm Oil Mill

ABSTRAKEnergi  memiliki  peranan penting dalam proses pembangunan yang pada akhirnya untuk mencapai tujuan sosial,  ekonomi  dan  lingkungan  untuk  serta  merupakan  pendukung bagi kegiatan  ekonomi  nasional. Sumber energi terbarukan yang berasal dari pemanfaatan biogas limbah cair kelapa sawit dapat menghasilkan energi listrik yang saat ini banyak bergantung pada generator diesel dengan biaya yang mahal.Limbah cair kelapa sawit (Palm Oil Mill Effluent atau POME) adalah limbah cair yang berminyak dan tidak beracun, berasal dari proses pengolahan minyak kelapa sawit, namun limbah cair tersebut dapat menyebabkan bencana lingkungan apabila tidak dimanfaatkan dan dibuang di kolam terbuka karena akan melepaskan sejumlah besar gas metana dan gas berbahaya lainnya ke udara yang menyebabkan terjadinya emisi gas rumah kaca. Tingginya kandungan Chemical Oxygen Demand (COD) sebesar 50.000-70.000 mg/l dalam limbah cair kelapa sawit memberikan potensi untuk dapat di konversi menjadi listrik dengan menangkap biogas (gas metana) yang dihasilkan melalui serangkaian tahapan proses pemurnian. Di Kabupaten Kotawaringin Timur terdapat 36 Pabrik Pengolahan Kelapa Sawit yang total kapasitas pabriknya adalah sebesar 2.115 TBS/jam, menghasilkan limbah cair sebesar 1.269 ton limbah cari/jam dan mampu menghasilkan 42.300 m3 biogas.Kata kunci:  Renewable Energy, Plam Oil Mill Effluent, Chemical Oxygen Demand, Biogass, Methane. ABSTRACTEnergy has an important role in the development process and ultimately to achieve the objectives of social, economic and environment for as well as an environmental support for national economic activity. Renewable energy source derived from wastewater biogas utilization of oil palm can produce electrical energy which is currently heavily dependent on diesel generators at a cost that mahal.Limbah liquid palm oil (Palm Oil Mill Effluent, or POME) is the wastewater that is greasy and non-toxic, derived from the processing of palm oil, but the liquid waste could cause environmental disaster if not used and disposed of in open ponds because it will release large amounts of methane and other harmful gases into the air that cause greenhouse gas emissions. The high content of Chemical Oxygen Demand (COD) of 50000-70000 mg / l in the liquid waste palm oil provides the potential to be converted into electricity by capturing the biogas (methane gas) produced through a series of stages of the purification process. In East Kotawaringin there are 36 palm oil processing factory that total factory capacity is of 2,115 TBS / hour, producing 1,269 tons of liquid waste wastewater / h and is capable of producing 42,300 m3 of biogas.Keywords:  Renewable Energy, Plam Oil Mill Effluent, Chemical Oxygen Demand, Biogass, MethaneCara sitasi: Alkusma, Y.M., Hermawan, dan Hadiyanto. (2016). Pengembangan Potensi Energi Alternatif dengan Pemanfaatan Limbah Cair Kelapa Sawit sebagai Sumber Energi Baru Terbarukan di Kabupaten Kotawaringin Timur. Jurnal Ilmu Lingkungan,14(2),96-102, doi:10.14710/jil.14.2.96-102

scholarly journals Penyisihan Polutan pada Palm Oil Mill Effluent (POME) Menggunakan Konsorsium Mikroalga-Bakteri dengan Sistem High Rate Algae Reactor (HRAR)

2021 ◽  
Vol 7 (1) ◽  
pp. 146-159
Author(s):  
Shinta Elystia ◽  
Vonny Meidina Rizani ◽  
Sri Rezeki Muria
Keyword(s):  
Removal Efficiency ◽  
Total Nitrogen ◽  
Palm Oil ◽  
Oxygen Demand ◽  
Bacterial Consortium ◽  
High Rate ◽  
Palm Oil Mill Effluent ◽  
Suspension Concentration ◽  
Palm Oil Mill ◽  
By Products

Palm oil mills in addition to producing crude palm oil also produce by-products in the form of Palm Oil Mill Effluent (POME). POME contains high amounts of organic ingredients and pollutants. One method that can be applied to treat POME is the High Rate Algae Reactor (HRAR) System. The HRAR system uses microalgae-bacterial consortium that has better performance in removing pollutants in POME and increasing the growth of microorganisms. This research aim by determining the effect of microalgae suspension concentration in the HRAR system towards the removal efficiency of Chemical Oxygen Demand (COD) and total nitrogen. The research was conducted in batch in the HRAR system that equipped with a paddle wheel, by variations of microalgae suspension concentration as 0; 10; 15; 20; and 25 (% v/v). The research was carried out for 7 days and used the sun as a source of light. Based on the research results, 25% of microalgae suspension concentration has the highest microalgae cell density, was 6,34 x 106 cells/mL and showed the best removal efficiency of COD and total nitrogen, were 78.79% and 80.37%.  

Treatment of Palm Oil Mill Effluent (POME) Supernatants Using Aerobic Attached–Growth System: Trickling Filter as a Case Study

2012 ◽  
Author(s):  
Ahmad Zuhairi Abdullah ◽  
Mohamad Hakimi Ibrahim ◽  
Mohd. Omar Ab. Kadir
Keyword(s):  
Palm Oil ◽  
Colloidal Particles ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Palm Oil Mill Effluent ◽  
Trickling Filter ◽  
Biomass Hydrolysis ◽  
Removal Efficiencies ◽  
Palm Oil Mill ◽  
Hydrolysis Of

Kertas kerja ini membincangkan tentang kecekapan penuras cucur dalam merawat supernatan kumbahan kilang kelapa sawit (POME). Supernatan POME diperoleh menerusi dua jenis perawatan. Dalam perawatan 1, pengendapan graviti digunakan untuk menyingkir pepejal boleh mendak. Perawatan 2 digunakan untuk menyingkir pepejal boleh mendak dan gumpalan partikal dengan menggunakan 350 ppm alum. Influen dialurkan secara titisan pada biojisim yang terlekat pada penyokong pepejal rawak PVC setinggi 1 m. Penuras cucur berupaya menyingkir lebih daripada 90.0% dari keperluan oksigen biologi (BOD) dan keperluan oksigen kimia (COD) di bawah 1 m3/m2–hari. Pada 2.53 m3/m2–hari, influen dengan Perawatan 1 menghasilkan kecekapan penyingkiran COD sebanyak 40.3%, berbanding 83.1% bila Perawatan 2 digunakan. Perkara ini berlaku berikutan penyingkiran bahan organik tak boleh resap semasa Perawatan 2. Kecekapan penyingkiran menurun dengan meningkatnya bebanan hidraulik kerana wujudnya kelemahan dalam hidrolisis bahan tak boleh resap kepada substratum larut. Dengan edaran semula (α=1), penyingkiran BOD dan COD yang lebih tinggi dicapai di bawah 7 m3/m2–hari. Pencapaian ini disebabkan oleh bebanan organik yang lebih rendah serta pergedaran semula enzim dan biojisim yang aktif kepada sistem. Perawatan 2 menghasilkan enap cemar yang lebih tinggi kerana penukaran substratum boleh larut kepada biojisim tak boleh larut. Hidrolisis bahan organik tak boleh resap didapati berlaku secara aktif pada bahagian atas penuras cucur sementara bahagian bawahnya cenderung mengoksidakan substratum organik. Kata kunci: POME, turas cucur, bahan organik bolehresap, penggumpalan, alir semula This paper discusses the efficiency of a trickling filter to treat Palm Oil Mill Effluent (POME) supernatants. POME supernatants were obtained via two treatments. In Treatment 1, gravity sedimentation was used to remove settleable solids. In Treatment 2, both settleable solids and colloidal particles were removed using 350 ppm of alum. The influents were allowed to trickle over biomass attached to 1 m high random PVC solid support. Below 1 m3/m2–day, the filter demonstrated Biological Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) removal efficiencies of more than 90.0%. At 2.53 m3/m2–day, the influent with Treatment 1 gave a COD removal efficiency of 40.3%, but increased to 83.1% when the influent with Treatment 2 was used. This was ascribed to the removal of non–diffusible organics during Treatment 2. The removal efficiencies decreased with an increase in hydraulic loading due to limitations in the hydrolysis of non–diffusibles into soluble substrates. With recirculation (α=1), higher BOD and COD removals were achieved below 7.0 m3/m2–day, attributed to lower organic loading and the recycling of active enzyme and biomass to the system. The influent with Treatment 2 demonstrated higher sludge production due to higher conversion of soluble substrates into insoluble biomass. Hydrolysis of non–diffusible organics mainly took place at upper reaches of the filter column while lower reaches were involved in oxidizing the organic subtrates. Key words: POME, trickling filter, diffusible organic, coagulation, recirculation

Effect of Different Mediators on Bio-Energy Generation and Palm Oil Mill Effluent Treatment in an Air-Cathode Microbial Fuel Cell-Adsorption System

2021 ◽  
Vol 411 ◽  
pp. 67-78
Author(s):  
Ivy Ai Wei Tan ◽  
J.R. Selvanathan ◽  
M.O. Abdullah ◽  
N. Abdul Wahab ◽  
D. Kanakaraju
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Palm Oil ◽  
Oxygen Demand ◽  
Energy Generation ◽  
Effluent Treatment ◽  
Palm Oil Mill Effluent ◽  
Adsorption System ◽  
Air Cathode ◽  
Palm Oil Mill

Palm oil mill effluent (POME) discharged without treatment into watercourses can pollute the water source. Microbial fuel cell (MFC) has gained high attention as a green technology of converting organic wastewater into bio-energy. As an approach to overcome the limitations of the existing POME treatment methods, air-cathode MFC-Adsorption system is introduced as an innovative technology to treat POME and generate bio-electricity simultaneously. However, the use of conventional MFC with proton exchange membrane in large scale applications is restricted by the high cost and low power generation. Addition of mediator in MFC is essential in order to increase the electron transfer efficiency, hence enhancing the system performance. This study therefore aims to investigate the effect of different type of mediators i.e. congo red (CR), crystal violet (CV) and methylene blue (MB) on the performance of an affordable air-cathode MFC-Adsorption system made from earthen pot with POME as the substrate. The addition of different mediators altered the pH of the MFC-Adsorption system, in which more alkaline system showed better performance. The voltage generated in the system with CR, CV and MB mediator was 120.58 mV, 168.63 mV and 189.25 mV whereas the current generated was 2.41 mA, 3.37 mA and 3.79 mA, respectively. The power density of 290.79 mW/m3, 568.72 mW/m3 and 716.31 mW/m3 was produced in the MFC-Adsorption system with CR, CV and MB mediator, respectively. The highest POME treatment efficiency was achieved in MFC-Adsorption system with MB mediator, which resulted in biochemical oxygen demand, chemical oxygen demand, total suspended solids, turbidity and ammoniacal nitrogen removal of 75.3%, 84.8%, 91.5%, 86.1% and 23.31%, respectively. Overall, the air-cathode MFC-Adsorption system with addition of MB mediator was feasible for POME treatment and simultaneous bio-energy generation.

scholarly journals Acclimatization Study for Biohydrogen Production from Palm Oil Mill Effluent (POME) in Continuous-flow System

2018 ◽  
Vol 34 ◽  
pp. 02054 ◽  
Author(s):  
N. Idris ◽  
N.A. Lutpi ◽  
Y. S. Wong ◽  
T.N. Tengku Izhar
Keyword(s):  
Steady State ◽  
Palm Oil ◽  
Continuous Flow ◽  
Flow System ◽  
Oxygen Demand ◽  
Biohydrogen Production ◽  
Palm Oil Mill Effluent ◽  
Continuous Flow System ◽  
Thermophilic Fermentation ◽  
Palm Oil Mill

This research aims to study the acclimatization phase for biohydrogen production from palm oil mill effluent (POME) by adapting the microorganism to the new environment in continuous-flow system of thermophilic bioreactor. The thermophilic fermentation was continuously loaded with 0.4 L/day of raw POME for 35 days to acclimatize the microorganism until a steady state of biohydrogen production was obtained. The significance effect of acclimatization phase on parameter such as pH, microbial growth, chemical oxygen demand (COD), and alkalinity were also studied besides the production of biogas. This study had found that the thermophilic bioreactor reach its steady state with 1960 mL/d of biogas produced, which consist of 894 ppm of hydrogen composition.

scholarly journals Enhancement of Biodegradation of Palm Oil Mill Effluents by local Isolated Fungi

2016 ◽  
Vol 15 (4) ◽  
pp. 23-34 ◽  
Author(s):  
F T Z Jabeen ◽  
J V Shreevathsa
Keyword(s):  
Chemical Oxygen Demand ◽  
Effective Treatment ◽  
Palm Oil ◽  
Biochemical Oxygen Demand ◽  
Oxygen Demand ◽  
Palm Oil Mill Effluent ◽  
Physicochemical Quality ◽  
Palm Oil Mill ◽  
Micro Organisms ◽  
Better Than

This study was designed to investigate the fungi associated with palm oil mill effluent (POME) in Gulur village of Tumkur. Biodegradation of palm oil mill effluents was conducted to measure the discarded POME based on physicochemical quality. The fungi that were isolated are Aspergillusniger, A. flavus, A. fumigatus, A. ochraceus, Rhizopussp, Peniciliumsp and Trichodermavirde. The autoclaved and unautoclaved raw POME samples were incubated for 7 days and the activities of the fungi were observed each for 12 hours. The supernatants of the digested POME were investigated for the removal of chemical oxygen demand (COD), color (ADMI), and biochemical oxygen demand (BOD) at the end of each digestion cycle. The results showed that the unautoclaved raw POME sample degraded better than the inoculated POME sample and this suggests that the microorganisms that are indigenous in the POME are more effective than the introduced micro-organisms. This result, however, indicates the prospect of isolating indigenous microorganisms in the POME for effective biodegradation of POME. Moreover, the effective treatment of POME yields useful products such as reduction of BOD, COD, and color.

scholarly journals IDENTIFIKASI LIMBAH PALM OIL MILL EFFLUENT (POME) MENGGUNAKAN BIOSENSOR BERBASIS ALGA

2021 ◽  
Vol 7 (1) ◽  
pp. 1-6
Author(s):  
Dina Maryani ◽  
Lazuardi Umar
Keyword(s):  
Chemical Oxygen Demand ◽  
Palm Oil ◽  
Biochemical Oxygen Demand ◽  
Oxygen Demand ◽  
Palm Oil Mill Effluent ◽  
Chlorella Sp ◽  
Palm Oil Mill

Palm Oil Mill Effluent (POME) merupakan limbah minyak kelapa sawit yang memiliki kadar Chemical Oxygen Demand (COD) dan Biochemical Oxygen Demand (BOD) yang tinggi dan sehingga merusak ekosistem periairan serta menurunkan kadar oksigen terlarut (DO). Namun, POME memiliki nutrisi untuk sel alga dalam memproduksi oksigen. Berdasarkan hal tersebut diperlukan identifikasi POME yang jatuh kebadan air berdasarkan fotosintesis Chlorella sp. menggunakan biosensor. Biosensor telah banyak dikembangkan dalam aplikasi bidang lingkungan dengan melihat kadar oksigen terlarut sebagai kualitas perairan. Penelitian ini menggunakan biosensor dengan prinsip sensor amperometris  tipe Biochip-G. Sensor amperometris mengukur perubahan arus dari reaksi reduksi dan oksidasi dan menghasilkan potensial keluaran yang terukur. Potensial keluaran yang terukur merupakan kadar oksigen terlarut dari penambahan POME terhadap Chlorella sp. ketika proses fotosintesis terjadi. Identifikasi POME berdasarkan proses fotosintesis Chlorella sp. menggunakan cahaya artifisial LED Putih 380 nm-780 nm dengan tingkat variasi konsentrasi POME sebanyak 10%, 20%, dan 30%. Berdasarkan pengukuran kadar oksigen terlarut (DO) menghasilkan nilai DO sebesar 174.15%, 154.66%, dan 138.98% serta nilai sensitivitas sebesar 4mV/%POME.  

Sign in / Sign up

Export Citation Format

Share Document