Methods of testing plastics. Methods 502, 503 and 504 water absorption and water soluble matter, boiling water absorption and water vapour absorption.

1958 ◽  
Keyword(s):  
Water Absorption ◽  
Water Vapour ◽  
Water Soluble ◽  
Boiling Water ◽  
Water Vapour Absorption

scholarly journals The Impact of Post-Manufacture Treatments on the Surface Characteristics Important for Finishing of OSB and Particleboard

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 975
Author(s):  
Antonio Copak ◽  
Vlatka Jirouš-Rajković ◽  
Nikola Španić ◽  
Josip Miklečić
Keyword(s):  
Water Vapour ◽  
Oriented Strand Board ◽  
Construction Material ◽  
Surface Characteristics ◽  
Surface Treatments ◽  
Factors Affecting ◽  
Treatment Conditions ◽  
Water Vapour Absorption ◽  
The Impact

Oriented strand board (OSB) is a commonly used structural wood-based panel for walls and roof siding, but recently the industry has become interested in OSB as a substrate for indoor and outdoor furniture. Particleboard is mainly used in furniture productions and has become popular as a construction material due to its numerous usage possibilities and inexpensive cost. Moisture is one of the most important factors affecting wood-based panel performance and the post-treatment conditions affected their affinity to water. When OSB and particleboard are used as substrates for coatings, their surface characteristics play an important role in determining the quality of the final product. Furthermore, roughness can significantly affect the interfacial phenomena such as adsorption, wetting, and adhesion which may have an impact on the coating performance. In this research particleboard and OSB panels were sanded, re-pressed and IR heated and the influence of surface treatments on hardness, roughness, wetting, water, and water vapour absorption was studied. Results showed that sanding improved the wetting of particleboard and OSB with water. Moreover, studied surface treatments increased water absorption and water penetration depth of OSB panels, and re-pressing had a positive effect on reducing the water vapour absorption of particleboard and OSB panels.

Effect on Vulcanized Rubber Compounds of Immersion in Boiling Water

1931 ◽  
Vol 4 (3) ◽  
pp. 426-436
Author(s):  
K. J. Soule
Keyword(s):  
Water Absorption ◽  
Room Temperature ◽  
Anomalous Behavior ◽  
Boiling Water ◽  
Vulcanized Rubber ◽  
Rubber Compounds ◽  
Different Temperatures ◽  
Actual Change

Abstract Further work is very desirable on the effect of different accelerators, antioxidants, and fluxes. It is possible that their study will throw more light on the mechanism of the swelling phenomena, and also help to explain the anomalous behavior of some of the fillers tested. It would also seem to be worth while to study the action of a few selected stocks in water, at several temperatures between room temperature and 100° C., to determine if the water absorption and swelling merely increase with rising temperatures, or whether there might be an actual change in behavior at different temperatures.

Comprehensive Characterization of Agricultural By-Products for Bio-Aggregate Based Concrete

2022 ◽  
Author(s):  
Herinjaka Haga Ratsimbazafy ◽  
Aurélie Laborel-Préneron ◽  
Camille Magniont ◽  
Philippe Evon
Keyword(s):  
Water Absorption ◽  
Building Materials ◽  
Complete Characterization ◽  
Water Soluble ◽  
Dry Density ◽  
Characterization Methods ◽  
Manufacturing Method ◽  
West Part ◽  
Hemp Shiv ◽  
By Products

The valorization of available agricultural by-products is important for the development of bio-aggregate based concretes as eco-friendly solutions for building materials. However, their diversity requires to assess their potential of use in vegetal concretes. This study aims to propose simple and relevant multi-physical characterization methods for plant aggregates. Basic and complementary characterizations were carried out on hemp shiv as a reference plant aggregate, and nine by-products available in the South-West part of France, i.e., oleaginous flax shiv, sunflower pith and bark, coriander straw, wheat straw, wheat chaff, corn shuck, miscanthus stem and vine shoot. The basic characterizations performed were those recommended by the TC-RILEM 236 BBM, i.e., particle size distribution, bulk density, water absorption and thermal conductivity. Complementary characterizations have also been proposed, taking into account the possible environment of the binder and the vegetal concrete manufacturing method. The additional tests developed or adapted from previous research assess the following properties: the content of water-soluble compounds at pH 7 and 12, the dry density of plant aggregates compacted in wet state, the real water absorption after compaction and the compression behavior of these compacted aggregates. This complete characterization highlights the distinct behavior of the different agroresources and allows to correlate these characteristics to the use properties of hardened composites.

An equation describing water vapour absorption on porous carbon

Carbon ◽  
1992 ◽  
Vol 30 (1) ◽  
pp. 123-124 ◽  
Author(s):  
S.S. Barton ◽  
M.J.B. Evans ◽  
J. MacDonald
Keyword(s):  
Water Vapour ◽  
Porous Carbon ◽  
Water Vapour Absorption
Sign in / Sign up

Export Citation Format

Share Document