Micro process engineering. Vocabulary

2015 ◽  
Keyword(s):  
Process Engineering ◽  
Micro Process Engineering

Chemical Micro Process Engineering

2005 ◽  
Author(s):  
Volker Hessel ◽  
Holger Löwe ◽  
Andreas Müller ◽  
Gunther Kolb
Keyword(s):  
Process Engineering ◽  
Micro Process Engineering

scholarly journals Influence of Cross Section Thickness and Aspect Ratio on Deformation during Diffusion Bonding and Impact of Metal Diffusion and Evaporation on Temperature Measurement Accuracy

2020 ◽  
Author(s):  
Thomas Gietzelt ◽  
Volker Toth ◽  
Manfred Kraut ◽  
Uta Gerhards ◽  
Robin Duerrschnabel
Keyword(s):  
Aspect Ratio ◽  
Temperature Measurement ◽  
Contact Pressure ◽  
Cross Section ◽  
Cross Sections ◽  
Diffusion Bonding ◽  
Bonding Temperature ◽  
Process Engineering ◽  
The Cross ◽  
Micro Process Engineering

Diffusion bonding is often used on pre-machined parts to generate internal cavities, e.g. for cooling injection molding tools close to the mold cavity. Only then, the workpieces are finished to their final dimensions. In the case of micro-process devices, however, it is essential to precisely control the deformation, as otherwise uncontrollable pressure losses will occur with channel cross-sections in the sub-millimeter range. Post-processing is not possible. The most important process parameters for diffusion bonding are temperature, dwell time and contact pressure, with the bonding temperature and contact pressure acting in opposite directions and showing a strong non-linear dependence on deformation. In addition, the deformation is influenced by a number of other factors such as the absolute size of the cross-section and the aspect ratio of the parts, the dimensions and distribution of the internal cross sections and the overall percentage of the cross-section to be bonded. In micro process engineering, small material cross-sections in the range of the materials microstructure can facilitate additional deformation mechanisms such as grain boundary sliding, which are not relevant at all for larger structures. For parts consisting of multiple layers, tolerances in thickness and roughness of multiple surfaces must be levelled, contributing to the percentaged deformation. This makes it difficult, especially in micro process engineering and in single or small series production, to determine suitable joining parameters in advance, which on the one hand do not cause unforeseen large deformations, but on the other hand reliably produce highly vacuum-tight components. Hence, a definition of a fixed percentaged deformation does not work for all kinds of components. This makes it difficult to specify parameters for surely obtain high-vacuum tight parts. For successful diffusion bonding, atoms must diffuse over the bonding planes, forming a monolithic part in which the original layers are no longer visible. Only then, mechanical properties identical to those of the base material, which has been subjected to identical heat treatment, can be achieved. In this paper, the impacts of different material cross section widths as well as of the aspect ratio on deformation were investigated. By accident, it was found that also accuracy of the temperature measurement may have a serious impact in terms of deformation.

Sign in / Sign up

Export Citation Format

Share Document