Polymer coated paper and board intended for food contact. Detection of pinholes

2015 ◽  
Keyword(s):  
Contact Detection ◽  
Coated Paper ◽  
Food Contact

Economics of coated paper production made from deinked pulp

TAPPI Journal ◽  
2013 ◽  
Vol 12 (4) ◽  
pp. 19-27
Author(s):  
PATRICK HUBER ◽  
LAURENT LYANNAZ ◽  
BRUNO CARRÉ
Keyword(s):  
Mechanical Properties ◽  
Optimization Methods ◽  
Coating Process ◽  
Coated Paper ◽  
Paper Production ◽  
Base Paper

The fraction of deinked pulp for coated paper production is continually increasing, with some mills using 100% deinked pulp for the base paper. The brightness of the coated paper made from deinked pulp may be reached through a combination of more or less extensive deinking, compensated by appropriate coating, to optimize costs overall. The authors proposed general optimization methods combined with Kubelka-Munk multilayer calculations to find the most economical combination of deinking and coating process that would produce a coated paper made from DIP, at a given target brightness, while maintaining mechanical properties.

Cracking at the fold in double layer coated paper: the influence of latex and starch composition

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 93-99
Author(s):  
SEYYED MOHAMMAD HASHEMI NAJAFI ◽  
DOUGLAS BOUSFIELD, ◽  
MEHDI TAJVIDI
Keyword(s):  
Mechanical Properties ◽  
Double Layer ◽  
Starch Content ◽  
Single Layer ◽  
Double Layers ◽  
Coated Paper ◽  
Coated Papers ◽  
Coating Layers ◽  
Scanned Images ◽  
Packaging Paper

Cracking at the fold of publication and packaging paper grades is a serious problem that can lead to rejection of product. Recent work has revealed some basic mechanisms and the influence of various parameters on the extent of crack area, but no studies are reported using coating layers with known mechanical properties, especially for double-coated systems. In this study, coating layers with different and known mechanical properties were used to characterize crack formation during folding. The coating formulations were applied on two different basis weight papers, and the coated papers were folded. The binder systems in these formulations were different combinations of a styrene-butadiene latex and mixtures of latex and starch for two different pigment volume concentrations (PVC). Both types of papers were coated with single and double layers. The folded area was scanned with a high-resolution scanner while the samples were kept at their folded angle. The scanned images were analyzed within a constant area. The crack areas were reported for different types of papers, binder system and PVC values. As PVC, starch content, and paper basis weight increased, the crack area increased. Double layer coated papers with high PVC and high starch content at the top layer had more cracks in comparison with a single layer coated paper, but when the PVC of the top layer was low, cracking area decreased. No measurable cracking was observed when the top layer was formulated with a 100% latex layer.

Functional surfaces produced by foam coating

TAPPI Journal ◽  
2016 ◽  
Vol 15 (8) ◽  
pp. 515-521 ◽  
Author(s):  
EIJA KENTTÄ ◽  
HANNA KOSKELA ◽  
SARA PAUNONEN ◽  
KARITA KINNUNEN-RAUDASKOSKI ◽  
TUOMO HJELT
Keyword(s):  
Life Time ◽  
Silica Coating ◽  
Foaming Properties ◽  
Coated Paper ◽  
Paper Properties ◽  
Foaming Agent ◽  
Foaming Agents ◽  
Size Stability ◽  
Stability Measurement ◽  
Standard Paper

This paper reports experiments on silica coating formulations that are suitable for application as a thin pigment layer with foam coating technique on a paper web. To understand the foaming properties of nanosilica dispersions, the critical micelle concentration, foam half-life time, and foam bubble size stability were determined with three different foaming agents. The results indicate that the bubble stability measurement is a useful characterization method for foam coating purposes. Pilot foam coating trials were done and the effects of the chosen foaming agents were studied on the properties of the nanosilica-coated paper. The surface hydrophilicity of silica coated paper was related not only to silica pigment, but also to the chemical nature of the foaming agent. Standard paper properties were not affected by the thin silica coating.

A Study on Pigment Coated Paper Produced by High Speed Curtain Coating (2)

2004 ◽  
Vol 58 (8) ◽  
pp. 1040-1046
Author(s):  
Kazuaki Ito ◽  
Hisashi Matsui ◽  
Atsushi Higuchi
Keyword(s):  
High Speed ◽  
Coated Paper ◽  
Curtain Coating

The Basic Study on the Relationship between the Physical Properties of Coating Pigment and the Coated Paper Quality

2011 ◽  
Vol 65 (12) ◽  
pp. 1293-1297
Author(s):  
Keiko Hashiguchi ◽  
Takehiro Yoshimatsu ◽  
Masanori Kawashima
Keyword(s):  
Physical Properties ◽  
Coated Paper ◽  
Basic Study ◽  
The Relationship ◽  
Paper Quality

Study on Print Abrasion Trouble in Ink Layer of Matt Coated Paper

2007 ◽  
Vol 61 (10) ◽  
pp. 1198-1203
Author(s):  
Takeshi Watanabe ◽  
Shigeo Yamanaka ◽  
Nobuhiro Matsuda
Keyword(s):  
Coated Paper
Sign in / Sign up

Export Citation Format

Share Document