Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)

1973 ◽  
Keyword(s):  
Zirconium Alloy

Control of hydrogen absorption by nickel films obtained upon magnetic spraying of zirconium alloy using the thermoEMF method

2020 ◽  
Vol 86 (8) ◽  
pp. 32-37
Author(s):  
V. V. Larionov ◽  
Xu Shupeng ◽  
V. N. Kudiyarov
Keyword(s):  
Magnetron Sputtering ◽  
Hydrogen Concentration ◽  
Hydrogen Absorption ◽  
Zirconium Alloy ◽  
Hydrogen Adsorption ◽  
Zirconium Alloys ◽  
Nickel Film ◽  
Protective Film ◽  
Nickel Films ◽  
Hydrogen Penetration

Nickel films formed on the surface of zirconium alloys are often used to protect materials against hydrogen penetration. Hydrogen adsorption on nickel is faster since the latter actively interacts with hydrogen, oxidizes and forms a protective film. The goal of the study is to develop a method providing control of hydrogen absorption by nickel films during vacuum-magnetron sputtering and hydrogenation via measuring thermoEMF. Zirconium alloy E110 was saturated from the gas phase with hydrogen at a temperature of 350°C and a pressure of 2 atm. A specialized Rainbow Spectrum unit was used for coating. It is shown that a nickel film present on the surface significantly affects the hydrogen penetration into the alloy. A coating with a thickness of more than 2 μm deposited by magnetron sputtering on the surface of a zirconium alloy with 1% Nb, almost completely protects the alloy against hydrogen penetration. The magnitude of thermoemf depends on the hydrogen concentration in the zirconium alloy and film thickness. An analysis of the hysteresis width of the thermoEMF temperature loop and a method for determining the effective activation energy of the conductivity of a hydrogenated material coated with a nickel film are presented. The results of the study can be used in assessing the hydrogen concentration and, hence, corrosion protection of the material.

To the issue of corrosion of occluders from beta-zirconium alloy in experimental study of endovascular devices for the closure of arterial duct

2018 ◽  
Vol 0 (2) ◽  
pp. 38-45
Author(s):  
Yu. V. Panichkin ◽  
V. P. Zakharova ◽  
Yu. L. Konopliova ◽  
A. Yu. Gavrilishin ◽  
E. V. Beshlyaga ◽  
...  
Keyword(s):  
Experimental Study ◽  
Zirconium Alloy ◽  
Arterial Duct ◽  
Endovascular Devices

SCHMELZMETALL HOVADUR CCZ

Alloy Digest ◽  
2020 ◽  
Vol 69 (9) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Spot Welding ◽  
Zirconium Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Softening Temperature ◽  
Aged Condition ◽  
Heat Treated ◽  
High Softening Temperature ◽  
Made In

Abstract Schmelzmetall Hovadur CCZ is a heat-treatable, copper-chromium-zirconium alloy. In the solution heat-treated and artificially aged condition, this alloy exhibits high thermal and electrical conductivity along with high strength and a high softening temperature. Hovadur CCZ evolved from CuCr1 (CW105C), a precipitation-hardenable alloy first made in the 1930s for spot welding electrodes, for which strength and hardness at temperatures up to 500 °C (930 °F), as well as good electrical and thermal conductivity, are essential. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-912. Producer or source: Schmelzmetall AG.

DOWMETAL HZ32XA

Alloy Digest ◽  
1956 ◽  
Vol 5 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Creep Resistance ◽  
Zirconium Alloy ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
High Temperature Creep ◽  
Aged Condition ◽  
Chemical Company ◽  
Temperature Performance

Abstract DOWMETAL HZ32XA is a magnesium-thorium-zinc-zirconium alloy having good high temperature creep resistance, and is recommended for applications at elevated temperatures. It is used in the artificially aged condition (T5). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Mg-26. Producer or source: The Dow Chemical Company.

JESSOP-SAVILLE ZIRCONIUM ALLOY

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Zirconium Alloy ◽  
Heat Treating ◽  
Pressurized Water Reactors ◽  
Neutron Absorption ◽  
High Melting Point ◽  
Absorption Properties ◽  
Pressurized Water ◽  
Excellent Corrosion Resistance ◽  
Water Reactors

Abstract JESSOP-SAVILLE ZIRCONIUM Alloy has a high melting point and possesses excellent corrosion resistance coupled with low neutron absorption properties. It is equivalent to ZIRCALOY 2. It is recommended for pressurized water reactors. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zr-2. Producer or source: Jessop-Saville Ltd, Brightside Works.

Thermal Analysis and Irradiation Growth of Coated Zirconium Alloy Cladding Specimens in HFIR

2020 ◽  
Author(s):  
Patrick Champlin ◽  
Christian Petrie ◽  
Annabelle Le Coq ◽  
Kurt Smith ◽  
Kory Linton
Keyword(s):  
Thermal Analysis ◽  
Zirconium Alloy ◽  
Irradiation Growth
Sign in / Sign up

Export Citation Format

Share Document