Prediction of vibration response and acoustic radiation of a thin-walled box with particle dampers using multiphase flow theory of gas-particle

2016 ◽  
Vol 64 (1) ◽  
pp. 85-98
Author(s):  
Dongqiang Wang ◽  
Chengjun Wu ◽  
Ruichao Yang
Keyword(s):  
Multiphase Flow ◽  
Acoustic Radiation ◽  
Flow Theory ◽  
Vibration Response ◽  
Thin Walled ◽  
Particle Dampers

Post-buckling inelastic analysis of thin-walled metal members using the Generalised Beam Theory

2019 ◽  
Author(s):  
Miguel Abambres ◽  
Dinar Camotim ◽  
Miguel Abambres
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Beam Theory ◽  
Flow Theory ◽  
Promising Alternative ◽  
Inelastic Analysis ◽  
Post Buckling ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Generalised Beam Theory

A 2nd order inelastic Generalised Beam Theory (GBT) formulation based on the J2 flow theory is proposed, being a promising alternative to the shell finite element method. Its application is illustrated for an I-section beam and a lipped-C column. GBT results were validated against ABAQUS, namely concerning equilibrium paths, deformed configurations, and displacement profiles. It was concluded that the GBT modal nature allows (i) precise results with only 22% of the number of dof required in ABAQUS, as well as (ii) the understanding (by means of modal participation diagrams) of the behavioral mechanics in any elastoplastic stage of member deformation .

FEM/BEM Simulation of Vibroacoustics of a Fluid-Loaded, Stiffened Plate Under Combined Force-Moment Excitation

2000 ◽  
Author(s):  
H. Zheng ◽  
C. Cai ◽  
G. R. Liu ◽  
K. Y. Lam
Keyword(s):  
Numerical Simulation ◽  
Acoustic Radiation ◽  
Normal Modes ◽  
Vibration Response ◽  
Structural Vibration ◽  
Stiffened Plate ◽  
Coupled Modes ◽  
Force Moment ◽  
Surrounding Fluid ◽  
Element Method

Abstract A numerical simulation of structural vibration and acoustic radiation is presented for a finite, fluid-loaded plate reinforced with two sets of orthotropic stiffeners. The attempt is to achieve a physical understanding of the dynamic behaviour and especially the acoustic radiation of the stiffened plate under combined force and moment excitations. Finite element method (FEM) is employed for calculation of the in-vacuo normal modes of the stiffened plate. The coupled modes with a heavy fluid (water), vibration response and acoustic radiation of the plate under given force and/or moment excitation are calculated using boundary element method (BEM). Numerical simulation results are detailed to address the significance of moment in combined force-moment excitations and, more importantly, the cancelling of the combined excitation in both structural vibration response and the associated acoustic radiation into the surrounding fluid.

Acoustical Radiation Characteristics Test of Magnesium Alloy Sheets with Element Method

2014 ◽  
Vol 926-930 ◽  
pp. 375-378
Author(s):  
Ting Jin ◽  
Zheng Yin Ding
Keyword(s):  
Magnesium Alloy ◽  
Acoustic Radiation ◽  
Radiation Characteristics ◽  
Paper Advance ◽  
Structure Vibration ◽  
Connection Type ◽  
Thin Walled ◽  
Element Method

Structure vibration is one of the main causes of noise. Thin-walled workpiece has a smaller stiffness,it will easily produce vibrations at work ,and become a source of noice. It is very necessary to study acoustic radiation characteristics of plat,so can we effectively control the structure and connection type of panel structure to change acoustical radiation characteristics.This paper advance a element method to test acoustical radiation characteristics of plat,and take experiment with magnesium alloy sheets.

A Symmetric Galerkin Formulation of the Boundary Element Method for Acoustic Radiation and Scattering

1997 ◽  
Vol 05 (02) ◽  
pp. 219-241 ◽  
Author(s):  
Z. S. Chen ◽  
G. Hofstetter ◽  
H. A. Mang
Keyword(s):  
Boundary Element Method ◽  
Numerical Solution ◽  
Boundary Element ◽  
Integral Equations ◽  
Acoustic Radiation ◽  
Numerical Study ◽  
Three Dimensional ◽  
Galerkin Formulation ◽  
Thin Walled ◽  
Element Method

A symmetric Galerkin formulation of the Boundary Element Method for acoustic radiation and scattering is presented. The basic integral equations for radiation and scattering of sound are derived for structures, which may consist of a combination of a three-dimensional closed part and thin-walled parts. For the numerical solution of these integral equations a Galerkin-type numerical solution scheme is proposed. The evaluation of the weakly-singular and the hypersingular integrals, occurring in this formulation, is addressed briefly. An improved CHIEF-method is employed in order to prevent the singularity of the coefficient matrix of the algebraic system of equations at so-called irregular frequencies. Subsequently, an algorithm for the automatic determination of the number of nodal unknowns at intersections of thin-walled parts of a structure, or of thin-walled parts and the three-dimensional closed part of a structure, is described. The numerical study contains comparisons of analytical solutions for simple academic examples with the numerical results. In addition, a comparison of measured and computed results is presented for a structure, consisting of both a three-dimensional closed part and a thin-walled part.

Sign in / Sign up

Export Citation Format

Share Document