scholarly journals Proton Exchange Membrane Fuel Cell Ejector Test Platform Design and Ejector Test Analysis

2021 ◽  
Vol 12 (3) ◽  
pp. 103
Author(s):  
Fengxiang Chen ◽  
Mingtao Hou ◽  
Jianhui Li ◽  
Yaowang Pei ◽  
Yangyang Wang
Keyword(s):  
Fuel Cell ◽  
Cfd Simulation ◽  
Turbulence Models ◽  
Performance Testing ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Test Method ◽  
Test Platform ◽  
Recirculation System ◽  
Ejector Device

The hydrogen recirculation system is essential to the performance of the fuel cell system; the ejector device plays an important role in the hydrogen recirculation system. In this paper, a test platform which can simulate the fuel cell anode system is integrated for ejector performance testing. Based on the ejector test platform, an ejector device was tested under different operating conditions. The design of the ejector test platform, the test method and test process are introduced in detail. The test results of the ejector are compared with the Computational Fluid Dynamics (CFD) simulation results of different turbulence models. The results show that the standard k-e model is more accurate than other turbulence models at small and medium flow rates. At a large flow rate, the realizable k-e model has a higher simulation accuracy than other turbulence models.

scholarly journals Numerical Study on Humidification Performance of Fuel Cell Test Platform Humidifier

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3839 ◽  
Author(s):  
Tiancai Ma ◽  
Kai Wang ◽  
Qiongqiong Zhou ◽  
Weikang Lin ◽  
Ming Cong ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Water Temperature ◽  
Numerical Study ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Air Velocity ◽  
Humidity Control ◽  
Test Platform ◽  
Temperature And Humidity ◽  
Cell Test

Temperature and humidity are important parameters in the operation of proton exchange membrane fuel cell (PEMFC), which have an important impact on the performance of fuel cell. Fuel cell test platform is an important tool to study the performance of fuel cells, and its temperature and humidity control module is also the key in the research process of the test platform, so that it can provide the gas with precise temperature and humidity control during the test process of the fuel cell. In this paper, a humidifier combined with bubbling and spraying is adopted for the application of test platform, and the numerical simulation model of the humidifier is established. According to the model, the influence of operating conditions of humidifier on humidification performance is verified, such as inlet air velocity and the humidifying water temperature. The results indicate that the inlet air velocity and the humidifying water temperature have great influence on the humidifying performance of the humidifier. The humidifying performance decreases with the increase of the inlet air velocity and increases with the increase of the humidifying water temperature respectively. In addition, the humidification performance of the humidifier is verified.

scholarly journals Modelling of Humidity Dynamics for Open-Cathode Proton Exchange Membrane Fuel Cell

2021 ◽  
Vol 12 (3) ◽  
pp. 106
Author(s):  
Fengxiang Chen ◽  
Liming Zhang ◽  
Jieran Jiao
Keyword(s):  
Fuel Cell ◽  
Mass Flow ◽  
Proton Exchange Membrane ◽  
Flow Model ◽  
Transport Theory ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Output Performance ◽  
Exchange Membrane

The durability and output performance of a fuel cell is highly influenced by the internal humidity, while in most developed models of open-cathode proton exchange membrane fuel cells (OC-PEMFC) the internal water content is viewed as a fixed value. Based on mass and energy conservation law, mass transport theory and electrochemistry principles, the model of humidity dynamics for OC-PEMFC is established in Simulink® environment, including the electrochemical model, mass flow model and thermal model. In the mass flow model, the water retention property and oxygen transfer characteristics of the gas diffusion layer is modelled. The simulation indicates that the internal humidity of OC-PEMFC varies with stack temperature and operating conditions, which has a significant influence on stack efficiency and output performance. In order to maintain a good internal humidity state during operation, this model can be used to determine the optimal stack temperature and for the design of a proper control strategy.

scholarly journals Design of Incremental Conductance Sliding Mode MPPT Control Applied by Integrated Photovoltaic and Proton Exchange Membrane Fuel Cell System under Various Operating Conditions for BLDC Motor

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Jehun Hahm ◽  
Hyoseok Kang ◽  
Jaeho Baek ◽  
Heejin Lee ◽  
Mignon Park
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Sliding Mode ◽  
Proton Exchange ◽  
Operating Conditions ◽  
System Control ◽  
Atmospheric Conditions ◽  
Pv Array ◽  
Incremental Conductance ◽  
Exchange Membrane

This paper proposes an integrated photovoltaic (PV) and proton exchange membrane fuel cell (PEMFC) system for continuous energy harvesting under various operating conditions for use with a brushless DC motor. The proposed scheme is based on the incremental conductance (IncCond) algorithm combined with the sliding mode technique. Under changing atmospheric conditions, the energy conversion efficiency of a PV array is very low, leading to significant power losses. Consequently, increasing efficiency by means of maximum power point tracking (MPPT) is particularly important. To manage such a hybrid system, control strategies need to be established to achieve the aim of the distributed system. Firstly, a Matlab/Simulink based model of the PV and PEMFC is developed and validated, as well as the incremental conductance sliding (ICS) MPPT technique; then, different MPPT algorithms are employed to control the PV array under nonuniform temperature and insolation conditions, to study these algorithms effectiveness under various operating conditions. Conventional techniques are easy to implement but produce oscillations at MPP. Compared to these techniques, the proposed technique is more efficient; it produces less oscillation at MPP in the steady state and provides more precise tracking.

Experimental Results of a PEM System Operated on Hydrogen and Reformate

2008 ◽  
Vol 5 (1) ◽  
Author(s):  
M. Minutillo ◽  
E. Jannelli ◽  
F. Tunzio
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Large Scale ◽  
Pem Fuel Cell ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Cell Performance ◽  
Pure Hydrogen ◽  
Test Bed ◽  
Fuel Cell Performance

The main objective of this study is to evaluate the performance of a proton exchange membrane (PEM) fuel cell generator operating for residential applications. The fuel cell performance has been evaluated using the test bed of the University of Cassino. The experimental activity has been focused to evaluate the performance in different operating conditions: stack temperature, feeding mode, and fuel composition. In order to use PEM fuel cell technology on a large scale, for an electric power distributed generation, it could be necessary to feed fuel cells with conventional fuel, such as natural gas, to generate hydrogen in situ because currently the infrastructure for the distribution of hydrogen is almost nonexistent. Therefore, the fuel cell performance has been evaluated both using pure hydrogen and reformate gas produced by a natural gas reforming system.

Theoretical Analysis on the Autothermal Reforming Process of Ethanol as Fuel for a Proton Exchange Membrane Fuel Cell System

2006 ◽  
Vol 4 (4) ◽  
pp. 468-473 ◽  
Author(s):  
Alessandra Perna
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cell ◽  
Cell System ◽  
Autothermal Reforming ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Hydrogen Yield ◽  
Fuel Cell System ◽  
Exchange Membrane

The purpose of this work is to investigate, by a thermodynamic analysis, the effects of the process variables on the performance of an autothermal reforming (ATR)-based fuel processor, operating on ethanol as fuel, integrated into an overall proton exchange membrane (PEM) fuel cell system. This analysis has been carried out finding the better operating conditions to maximize hydrogen yield and to minimize CO carbon monoxide production. In order to evaluate the overall efficiency of the system, PEM fuel cell operations have been analyzed by an available parametric model.

scholarly journals Fuel Cell designing with optimal high speed air compressor

2021 ◽  
pp. 29-38
Author(s):  
Nabeel Ahsan ◽  
Mahrukh Mehmood ◽  
Asad A. Zaidi
Keyword(s):  
Fuel Cell ◽  
High Speed ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Air Compressor ◽  
Different Types ◽  
Input Parameters ◽  
Turbo Compressor

This paper discusses different air management technologies for fuel cell systems. Two different types of compressors are analyzed for Proton-exchange membrane fuel cells (PEMFC). Some important criteria are analyzed thoroughly for the selection of turbo compressor among different types of compressors illustrated with the help of matrix representations. The impacts of various input parameters for Fuel Cell (FC) are also explained thoroughly. Later the numerical modeling of an automobile fuel cell system using a high speed turbo-compressor for air supply is explained. The numerical model incorporates the important input parameters related with air and hydrogen. It also performed energy and mass balances across different components such as pump, fan, heat-exchanger, air compressor and also keeps in consideration the pressure drop across the flow pipes and various mechanical parts. The model is solved to obtain the characteristics of the FC system at different operating conditions. Therefore, it can be concluded that the high speed turbo compressor with a turbo-expander can have significant effects on the overall system power and efficiency.

scholarly journals Electrochemical Performance Improvement of the Catalyst of the Methanol Micro-Fuel Cell Using Carbon Nanotubes

2019 ◽  
Author(s):  
Mohammad Kazemi Nasrabadi ◽  
Amir Ebrahimi-Moghadam ◽  
Mohammad Hosein Ahmadi ◽  
Ravinder Kumar ◽  
Narjes Nabipour
Keyword(s):  
Carbon Nanotubes ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Carbon Black ◽  
Oxidation Reaction ◽  
High Energy ◽  
Proton Exchange ◽  
Operating Conditions ◽  
High Energy Density ◽  
Methanol Oxidation Reaction

Due to low working temperature, high energy density and low pollution, proton exchange fuel cells have been investigated under different operating conditions in different applications. Using platinum catalysts in methanol fuel cells leads to increasing the cost of this kind of fuel cell which is considered as a barrier to the commercialism of this technology. For this reason, a lot of efforts have been made to reduce the loading of the catalyst required on different supports. In this study, carbon black (CB) and carbon nanotubes (CNT) have been used as catalyst supports of the fuel cell as well as using the double-metal combination of platinum-ruthenium (PtRu) as anode electrode catalyst and platinum (Pt) as cathode electrode catalyst. The performance of these two types of electro-catalyst in the oxidation reaction of methanol has been compared based on electrochemical tests. Results showed that the carbon nanotubes increase the performance of the micro-fuel cell by 37% at maximum power density, compared to the carbon black. Based on thee-electrode tests of chronoamperometry and voltammetry, it was found that the oxidation onset potential of methanol for CNT has been around 20% less than CB, leading to the kinetic improvement of the oxidation reaction. The current density of methanol oxidation reaction increased up to 62% in CNT sample compared to CB supported one, therefore the active electrochemical surface area of the catalyst has been increased up to 90% by using CNT compared to CB which shows the significant rise of the electrocatalytic activity in CNT supported catalyst. Moreover, the resistance of the CNT supported sample to poisonous intermediate species has been found 3% more than CB supported one. According to the chronoamperometry test results, it was concluded that the performance and sustainability of the CNT electro-catalyst show remarkable improvement compared to CB electro-catalyst in the long term.

scholarly journals Recent Progress in the Development of Aromatic Polymer-Based Proton Exchange Membranes for Fuel Cell Applications

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1061 ◽  
Author(s):  
Raja Rafidah R. S. ◽  
Rashmi W. ◽  
Khalid M. ◽  
Wong W. Y. ◽  
Priyanka J.
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Conductivity ◽  
Elevated Temperatures ◽  
Proton Exchange Membranes ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Polymer Chains ◽  
Membrane Electrode ◽  
Aryl Ether

Proton exchange membranes (PEMs) play a pivotal role in fuel cells; conducting protons from the anode to the cathode within the cell’s membrane electrode assembles (MEA) separates the reactant fuels and prevents electrons from passing through. High proton conductivity is the most important characteristic of the PEM, as this contributes to the performance and efficiency of the fuel cell. However, it is also important to take into account the membrane’s durability to ensure that it canmaintain itsperformance under the actual fuel cell’s operating conditions and serve a long lifetime. The current state-of-the-art Nafion membranes are limited due to their high cost, loss of conductivity at elevated temperatures due to dehydration, and fuel crossover. Alternatives to Nafion have become a well-researched topic in recent years. Aromatic-based membranes where the polymer chains are linked together by aromatic rings, alongside varying numbers of ether, ketone, or sulfone functionalities, imide, or benzimidazoles in their structures, are one of the alternatives that show great potential as PEMs due totheir electrochemical, mechanical, and thermal strengths. Membranes based on these polymers, such as poly(aryl ether ketones) (PAEKs) and polyimides (PIs), however, lack a sufficient level of proton conductivity and durability to be practical for use in fuel cells. Therefore, membrane modifications are necessary to overcome their drawbacks. This paper reviews the challenges associated with different types of aromatic-based PEMs, plus the recent approaches that have been adopted to enhance their properties and performance.

Durability study and lifetime prediction of baseline proton exchange membrane fuel cell under severe operating conditions

2008 ◽  
Vol 182 (2) ◽  
pp. 469-475 ◽  
Author(s):  
M. Marrony ◽  
R. Barrera ◽  
S. Quenet ◽  
S. Ginocchio ◽  
L. Montelatici ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Lifetime Prediction ◽  
Exchange Membrane
Sign in / Sign up

Export Citation Format

Share Document