scholarly journals Adsorption of Malachite Green Dye onto Mesoporous Natural Inorganic Clays: Their Equilibrium Isotherm and Kinetics Studies

Water ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 965
Author(s):  
Sami Ullah ◽  
Altaf Ur Ur Rahman ◽  
Fida Ullah ◽  
Abdur Rashid ◽  
Tausif Arshad ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Surface Area ◽  
Malachite Green ◽  
Langmuir Isotherm ◽  
Adsorption Behavior ◽  
Area Measurement ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Operational Parameters ◽  
X Ray

Contamination of water with organic dyes is a major environmental concern as it causes serious life-threatening environmental problems. The present research was designed to evaluate the potential of three different natural inorganic clays (NICs) i.e., Pakistani bentonite clay (PB), bentonite purchased from Alfa Aesar (BT), and Turkish red mud (RM) for malachite green (MG) dye removal from an aqueous solution. Various analytical techniques, namely X-ray fluorescence spectrometry (XRF), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), Brunauer–Emmett–Teller surface area measurement (BET), and thermogravimetric analysis (TGA), were used to investigate the physicochemical properties of the NICs samples. The effect of adsorption operational parameters such as contact time, aqueous phase pH, dye concentration, and amount of NICs on the adsorption behavior of MG onto NICs samples were investigated under the batch adsorption system. The equilibrium and kinetic inspection reflected the best description of MG adsorption behavior by the Langmuir isotherm model and pseudo-first-order kinetic model, respectively. The results indicated that the adsorption was favorable at higher pH. The maximum adsorption capacities calculated by Langmuir isotherm for PB, BT, and RM were found to be 243.90 mg/g, 188.68 mg/g, and 172.41 mg/g, respectively. It can be concluded that natural inorganic clays with a higher surface area can be used as an effective adsorbent material to remove the MG dye from an aqueous solution.

scholarly journals Removal of methylene blue from aqueous solution by mesoporous silicalite-1 synthetized using carboxymethyl cellulose as template

2021 ◽  
Author(s):  
Sabarish Radoor ◽  
Jasila Karayil ◽  
Aswathy Jayakumar ◽  
Jyothi Mannekote Shivanna ◽  
Jyotishkumar Parameswaranpillai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Contact Time ◽  
Dye Removal ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Order Kinetic ◽  
Adsorption Method ◽  
X Ray ◽  
Adsorption Desorption

Abstract In the present work, we have developed a mesoporous silicalite-1 using CMC as a template for the removal of MB from aqueous solution. The synthesized silicalite-1 were characterised using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Energy-dispersive X-ray spectroscopy (EDX) and N2 adsorption-desorption isotherm (BET). XRD and FTIR analysis confirmed the formation of crystallinity and development of MFI structure in the mesoporous silicalite-1. The adsorption of MB dye on mesoporous silicalite-1 was conducted by batch adsorption method. The effect of various parameters such as adsorbent dosage, initial dye concentration, contact time and temperature on the dye uptake ability of silicalite-1 was investigated. The operating parameters for the maximum adsorption are silicalite-1 dosage (0.1 wt%), contact time (240 min), initial dye concentration (10 ppm) and temperature (30℃). The MB dye removal onto mesoporous silicalite-1 followed pseudo-second-order kinetic and Freundlich isotherm. The silicalite-1 exhibits 86% removal efficiency even after six adsorption-desorption cycle. Therefore, the developed mesoporous silicalite-1 is an effective eco-friendly adsorbent for MB dye removal from aqueous environment.

scholarly journals Removal of methylene blue from aqueous solution by mesoporous silicalite-1 synthetized using carboxymethyl cellulose as template

2021 ◽  
Author(s):  
Sabarish Radoor ◽  
Jasila Karayil ◽  
Aswathy Jayakumar ◽  
Jyothi Mannekote Shivanna ◽  
Jyotishkumar Parameswaranpillai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Contact Time ◽  
Dye Removal ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Order Kinetic ◽  
Adsorption Method ◽  
X Ray ◽  
Adsorption Desorption

Abstract In the present work, we have developed a mesoporous silicalite-1 using CMC as a template for the removal of MB from aqueous solution. The synthesized silicalite-1 were characterised using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Energy-dispersive X-ray spectroscopy (EDX) and N2 adsorption-desorption isotherm (BET). XRD and FTIR analysis confirmed the formation of crystallinity and development of MFI structure in the mesoporous silicalite-1. The adsorption of MB dye on mesoporous silicalite-1 was conducted by batch adsorption method. The effect of various parameters such as adsorbent dosage, initial dye concentration, contact time and temperature on the dye uptake ability of silicalite-1 was investigated. The operating parameters for the maximum adsorption are silicalite-1 dosage (0.1 wt%), contact time (240 min), initial dye concentration (10 ppm) and temperature (30°C). The MB dye removal onto mesoporous silicalite-1 followed pseudo-second-order kinetic and Freundlich isotherm. The silicalite-1 exhibits 86% removal efficiency even after six adsorption-desorption cycle. Therefore, the developed mesoporous silicalite-1 is an effective eco-friendly adsorbent for MB dye removal from aqueous environment.

scholarly journals Investigation of effectiveness of pyrolysis products on removal of alizarin yellow GG from aqueous solution: a comparative study with commercial activated carbon

2020 ◽  
Vol 81 (6) ◽  
pp. 1191-1208 ◽  
Author(s):  
Nihan Kaya ◽  
Zeynep Yildiz Uzun
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Surface Area ◽  
Bet Surface Area ◽  
Walnut Shell ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Pine Cone ◽  
Alizarin Yellow

Abstract The increasing use of dyestuff in industrial applications brings with it environmental problems. These dyes, which are an eco-toxic hazard, are common water pollutants, even at very low concentrations in water resources. Therefore, they must be removed in an economical way. In this study, low-cost biosorbents such as pine cone char, walnut shell char, and hazelnut shell char were prepared by pyrolysis process at different carbonization temperatures in the range of 400–700 °C. Biochars with the highest surface area were used to remove alizarin yellow GG from aqueous solution and the adsorption capacities of these materials were compared to commercially available activated carbon. Biomasses and prepared biochars were characterized using Fourier transform infrared spectroscopy, thermogravimetric/differential thermogravimetry analysis, Brunauer–Emmett–Teller (BET), scanning electron microscopy/energy dispersive X-ray spectroscopy, partial and elemental analysis techniques. Operational parameters such as contact time, temperature, pH, adsorbent dosage, and initial dye concentration were considered as variables for the batch adsorption experiments. Among the biochars used, the highest adsorption efficiency (82%) was obtained in pine cone char (BET surface area 259.74 m2/g) at pH = 3, T = 45 °C, adsorbent dosage of 8 g/L, and initial dye concentration of 20 ppm. The adsorption mechanism has been investigated by applying different kinetic and isotherm models with the aid of time-dependent adsorption data. The adsorption process was best described by Langmuir isotherm and pseudo-second order kinetic model.

scholarly journals Preparation of a Highly Porous Carbon Material Based on Quinoa Husk and Its Application for Removal of Dyes by Adsorption

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1407 ◽  
Author(s):  
Siji Chen ◽  
Shanshan Tang ◽  
Yang Sun ◽  
Gang Wang ◽  
Huan Chen ◽  
...  
Keyword(s):  
Malachite Green ◽  
Porous Carbon ◽  
Carbon Material ◽  
Chemical Activation ◽  
Methyl Violet ◽  
Porous Carbon Material ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Dyeing Wastewater ◽  
X Ray

A porous carbon material was prepared from quinoa husk (QH) by carbonization and chemical activation with KOH. A series of experiments, including SEM (Scanning electron microscopy), FT-IR (Fourier transform infrared), XRD (X-ray diffraction), Raman, X-ray photoelectron spectroscopy (XPS), and N2 adsorption/desorption, were carried out on the porous carbon produced from quinoa husk (PC–QH). The results showed that PC–QH was mainly composed of activated carbon and graphite. Moreover, PC–QH exhibited a high level of porosity with a BET (the Brunauer–Emmett–Teller theory) surface area of 1713 m2 g−1. As a representative dye, malachite green (MG) was selected to evaluate the performance of PC–QH to absorb the contaminants in dyeing wastewater. In batch adsorption experiments, PC–QH exhibited a high adsorption rate toward malachite green (MG). An uptake capacity of 599.90 mg g−1 was achieved in the initial 5 min, and the MG adsorption capacity of PC–QH reached 1365.10 mg g−1, which was higher than many other adsorbents. The adsorption data were well fitted with the Freundlich isotherm model and the pseudo-second-order kinetic model. PC–QH also displayed a high absorption rate to rhodamine B (RhB), methyl violet (MV), methylene blue (MB), and methyl orange (MO). The results in this study suggest that PC–QH can be a promising adsorbent for quick treatment of dyeing wastewater.

scholarly journals Release of toxic methylene blue from water by mesoporous silicalite-1: characterization, kinetics and isotherm studies

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Sabarish Radoor ◽  
Jasila Karayil ◽  
Aswathy Jayakumar ◽  
Jyotishkumar Parameswaranpillai ◽  
Suchart Siengchin
Keyword(s):  
Electron Microscopy ◽  
Contact Time ◽  
Dye Removal ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Order Kinetic ◽  
Adsorption Method ◽  
X Ray ◽  
Ft Ir ◽  
Adsorption Desorption

AbstractIn the present work, we have developed a mesoporous silicalite-1 using CMC as a template for the removal of MB from aqueous solution. The synthesized silicalite-1 were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Energy-dispersive X-ray spectroscopy (EDAX) and N2 adsorption–desorption isotherm (BET). XRD and FT-IR analysis confirmed the formation of crystallinity and development of MFI structure in the mesoporous silicalite-1. The adsorption of MB dye on mesoporous silicalite-1 was conducted by batch adsorption method. The effect of various parameters such as adsorbent dosage, initial dye concentration, contact time and temperature on the dye uptake ability of silicalite-1 was investigated. The operating parameters for the maximum adsorption are silicalite-1 dosage (0.1 wt%), contact time (240 min), initial dye concentration (10 ppm) and temperature (30 ℃). The MB dye removal onto mesoporous silicalite-1 followed pseudo-second-order kinetic and Freundlich isotherm. The silicalite-1 exhibits 86% removal efficiency even after six adsorption–desorption cycle. Therefore, the developed mesoporous silicalite-1 is an effective eco-friendly adsorbent for MB dye removal from aqueous environment.

scholarly journals Synthesis of Silver-Impregnated Magnetite Mesoporous Silica Composites for Removing Iodide in Aqueous Solution

Toxics ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 175
Author(s):  
Sang-Eun Jo ◽  
Jung-Weon Choi ◽  
Sang-June Choi
Keyword(s):  
Aqueous Solution ◽  
Langmuir Isotherm ◽  
High Surface ◽  
High Surface Area ◽  
High Capacity ◽  
Maximum Adsorption Capacity ◽  
Initial Contact ◽  
Order Kinetic ◽  
Sorption Ability ◽  
High Sorption

Mag@silica-Ag composite has a high sorption ability for I− in aqueous solution due to its high surface area and strong affinity for the studied anion. The material adsorbed I− rapidly during the initial contact time (in 45 min, η = 80%) and reached adsorption equilibrium after 2 h. Moreover, mag@silica-Ag proved to selectively remove I− from a mixture of Cl−, NO3− and I−. The adsorption behavior fitted the Langmuir isotherm perfectly and the pseudo-second-order kinetic model. Based on the Langmuir isotherm, the maximum adsorption capacity of mag@silica-Ag was 0.82 mmol/g, which is significantly higher than previously developed adsorbents. This study introduces a practical application of a high-capacity adsorbent in removing radioactive I− from wastewaters.

scholarly journals Effective Removal of Malachite Green from Aqueous Solutions Using Magnetic Nanocomposite: Synthesis, Characterization, and Equilibrium Study

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Ali Q. Alorabi
Keyword(s):  
Surface Area ◽  
Malachite Green ◽  
Chemical Activation ◽  
Aqueous Media ◽  
Kinetic Studies ◽  
Cost Effective ◽  
Magnetic Nanocomposite ◽  
Bet Surface Area ◽  
Isotherm Models ◽  
Order Kinetic

In this work, magnetized activated Juniperus procera leaves (Fe3O4@AJPL) were successfully prepared via chemical activation of JPL and in situ coprecipitation with Fe3O4. A Fe3O4@AJPL nanocomposite was successfully applied for the elimination of malachite green (MG) dye from aqueous media. The prepared Fe3O4@AJPL adsorbent was characterized by SEM, EDX, TEM, XRD, FTIR, TGA, and BET surface area analyses. The BET surface area and pore size of the Fe3O4@AJPL nanocomposite were found to be 38.44 m2/g and 10.6 nm, respectively. The XRD and FTIR results indicated the formation of a Fe3O4@AJPL nanocomposite. Different parameters, such as pH of the solution (3–8), adsorbent dosage (10–100 mg), temperature (25–45°C), contact time (5-240 min), and initial MG concentrations (20–350 mg/L), for the elimination of the MG dye using Fe3O4@AJPL were optimized and found to be 7, 50 mg, 45°C, 120 min, and 150 mg/L, respectively. The nonlinear isotherm and kinetic studies exhibited a better fitting to second-order kinetic and Langmuir isotherm models, with a maximum monolayer adsorption capacity of 318.3 mg/g at 45°C, which was highly superior to the previously reported magnetic nanocomposite adsorbents. EDX analyses confirmed the presence of nitrogen on the Fe3O4@AJPL surface after MG adsorption. The calculated thermodynamic factors indicated endothermic and spontaneous processes. The desorption of MG dye from Fe3O4@AJPL was performed using a solution of 90% ethanol. Finally, it could be concluded that the designed Fe3O4@AJPL magnetic nanocomposite will be a cost-effective and promising adsorbent for the elimination of MG from aqueous media.

scholarly journals Adsorption and Equilibrium Studies on the Removal of Methyl Red from Aqueous Solution Using White Potato Peel Powder

2017 ◽  
Vol 72 ◽  
pp. 52-64 ◽  
Author(s):  
Conrad K. Enenebeaku ◽  
Nnaemeka J. Okorocha ◽  
Uchechi E. Enenebeaku ◽  
Ikechukwu C. Ukaga
Keyword(s):  
Aqueous Solution ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Methyl Red ◽  
Potato Peel ◽  
White Potato ◽  
Equilibrium Studies

The potential of white potato peel powder for the removal of methyl red (MR) dye from aqueous solution was investigated. The adsorbent was characterized by FTIR and SEM analysis. Batch adsorption studies were conducted and various parameters such as contact time, adsorbent dosage, initial dye concentration, pH and temperature were studied to observe their effects in the dye adsorption process. The optimum conditions for the adsorption of MR onto the adsorbent (WPPP) was found to be contact (80 mins), pH (2) and temperature (303K) for an initial MR dye concentration of 50mg/l and adsorbent dose of 1.0g. The experimental equilibrium adsorption data of the (MR) dye fitted best and well to the Freundlich isotherm model. The maximum adsorption capacity was found to be 30.48mg/g for the adsorption of MR. The kinetic data conforms to the pseudo – second order kinetic model.

scholarly journals Microwave Enhanced Synthesis of Sulfonated Chitosan-montmorillonite for Effective Removal of Methylene Blue

2021 ◽  
Author(s):  
Nur Shazwani Abdul Mubarak ◽  
N.N. Bahrudin ◽  
Ali H. Jawad ◽  
B.H. Hameed ◽  
Sumiyyah Sabar
Keyword(s):  
Methylene Blue ◽  
Langmuir Isotherm ◽  
Cationic Dyes ◽  
Isotherm Model ◽  
Batch Adsorption ◽  
Sulfonate Group ◽  
Order Kinetic ◽  
Effective Removal ◽  
Langmuir Isotherm Model ◽  
Mb Adsorption

Abstract In this work, sulfonated chitosan montmorillonite composite (S-CS-MT) beads were synthesized using a microwave irradiation method designed to have a better saving-time procedure. The potency of S-CS-MT as an adsorbent was assessed for the removal of cationic dyes such as methylene blue (MB) from aqueous solution. The batch adsorption experiments indicated that MB adsorption onto S-CS-MT follows the Pseudo-second-order kinetic and Langmuir isotherm model. The maximum extent obtained from the Langmuir isotherm model for MB adsorption was 188.2 mg g− 1 at 303 K. The thermodynamic study indicated that the adsorption reaction is favorable and spontaneous. These findings indicated that montmorillonite chitosan grafted with the sulfonate group has the ability and efficacy as biohybrid adsorbent for the adsorption of cationic dyes.

scholarly journals The Removal of Uranium and Thorium from Their Aqueous Solutions by 8-Hydroxyquinoline Immobilized Bentonite

Minerals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 626 ◽  
Author(s):  
Salah ◽  
Gaber ◽  
Kandil
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The sorption of uranium and thorium from their aqueous solutions by using 8-hydroxyquinoline modified Na-bentonite (HQ-bentonite) was investigated by the batch technique. Na-bentonite and HQ-bentonite were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared (FTIR) spectroscopy. Factors that influence the sorption of uranium and thorium onto HQ-bentonite such as solution pH, contact time, initial metal ions concentration, HQ-bentonite mass, and temperature were tested. Sorption experiments were expressed by Freundlich and Langmuir isotherms and the sorption results demonstrated that the sorption of uranium and thorium onto HQ-bentonite correlated better with the Langmuir isotherm than the Freundlich isotherm. Kinetics studies showed that the sorption followed the pseudo-second-order kinetic model. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the sorption of uranium and thorium onto HQ-bentonite was endothermic, feasible, spontaneous, and physical in nature. The maximum adsorption capacities of HQ-bentonite were calculated from the Langmuir isotherm at 303 K and were found to be 63.90 and 65.44 for U(VI) and Th(IV) metal ions, respectively.

Sign in / Sign up

Export Citation Format

Share Document