scholarly journals Investigating the Performance of Enhanced Permeable Groins in Series

Water ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3531
Author(s):  
Manoochehr Shokrian Hajibehzad ◽  
Mahmood Shafai Bejestan ◽  
Vito Ferro
Keyword(s):  
Cost Effective ◽  
Effective Length ◽  
Scour Depth ◽  
Design Guideline ◽  
Scour Holes ◽  
Cost Effective Technique ◽  
In Series ◽  
Proper Design ◽  
Meander Bends ◽  
Deposition Height

The enhanced permeable groin is a novel eco-friendly and cost-effective technique for bank protection and restoration of meander bends. The behavior of bed deformations due to the distance between the structures has to be studied to design enhanced permeable groins in series properly. In this study, scour morphologies around enhanced permeable groins in series, characterized by four different distances and located in a 180° mild flume bend, for clear water conditions were investigated. The analysis indicated that scour geometrical patterns such as the maximum scour depth nearby the structures and the maximum deposition height between them are strongly affected by the distance between the groins. The results revealed that the maximum scour depth around the structures increases with the distance between structures, the scour holes develop towards the outer bank and create a series of pools that can lead to the bank collapse. All experiments, carried out with different structure distances, demonstrated that the location of thalweg effectively shifted towards the middle of the channel and near the inner bank for high and low particle Froude numbers, respectively. As a general result, a distance between enhanced permeable groins equal to four times the effective length of the structure is recommended for a 180° mild flume bend for the investigated particle Froude numbers. Finally, a general design guideline is presented to a proper design of enhanced permeable groins in series.

scholarly journals Experimental Scours by Impinging Twin-Propeller Jets at Quay Wall

2020 ◽  
Vol 8 (11) ◽  
pp. 872
Author(s):  
Yonggang Cui ◽  
Wei Haur Lam ◽  
Zhi Chao Ong ◽  
Lloyd Ling ◽  
Chee Loon Siow ◽  
...  
Keyword(s):  
Scour Depth ◽  
Water Tank ◽  
Quay Wall ◽  
Depth Position ◽  
Scour Hole ◽  
Scour Holes ◽  
Horseshoe Vortices ◽  
Three Stages ◽  
Deposition Height ◽  
The Relationship

Experiments were conducted to investigate the seabed scour holes due to the interaction between the twin-propeller jet and quay wall. Vertical quay wall was modelled by using a polyvinyl chloride (PVC) plastic plate in a water tank. The relationship between the positions of the propeller and the vertical quay wall was designed according to the actual working conditions of a ship entering and leaving a port. Propeller-to-wall distance and rotational speed were changed to observe the various scour conditions. The scour depth was measured by using an Acoustic Doppler Velocimeter (ADV). Primary scour hole was found within the jet downstream and secondary scour hole occurred beneath of the propeller. Third scour hole was found close to the quay wall due to horseshoe vortices. The maximum scour position of this third scour hole was found at the jet centre near the quay wall. Temporal formation of scour holes can be divided into three stages: axial scour formation, obstructed scour expansion and equilibrium stages. The quantitative relationships for six characteristic parameters of the scour pit were established including the maximum scour depth (εmax,q), maximum scour depth position (Xm,q), maximum scour width (Wm,q), length of main scour pit (XS,q), maximum deposition height (ZD,q), and location of maximum deposition height (XD,q).

A Chemical Perspective to the Anti-Amyloid Action of Compounds and a Nanoparticle Based Assay for Screening Amyloid Inhibitors

2020 ◽  
Author(s):  
Nidhi Gour ◽  
Bharti Koshti
Keyword(s):  
Memory Loss ◽  
Cost Effective ◽  
Structural Motif ◽  
Rapid Screening ◽  
Stacking Interactions ◽  
Aromatic Rings ◽  
Amyloid Fibers ◽  
Aromatic Stacking ◽  
Cost Effective Technique ◽  
The Brain

Aggregation of amyloid beeta 1-42 (Aβ<sub>42</sub>) peptide causes the formation of clustered deposits knows as amyloid plaques in the brain which leads to neuronal dysfunction and memory loss and associated with many neurological disorders including Alzheimer’s and Parkinson’s. Aβ<sub>42</sub> has core structural motif with phenylalanine at the 19 and 20 positions. The diphenylalanine (FF) residue plays a crucial role in the formation of amyloid fibers and serves as model peptide for studying Aβ<sub>42 </sub>aggregation. FF self-assembles to well-ordered tubular morphology via aromatic pi-pi stackings. Our studies, suggest that the aromatic rings present in the anti-amyloidogenic compounds may interact with the pi-pi stacking interactions present in the FF. Even the compounds which do not have aromatic rings, like cyclodextrin and cucurbituril show anti-amyloid property due to the binding of aromatic ring inside the guest cavity. Hence, our studies also suggest that compounds which may have a functional moiety capable of interacting with the aromatic stacking interactions might be tested for their anti-amyloidogenic properties. Further, in this manuscript, we have proposed two novel nanoparticle based assays for the rapid screening of amyloid inhibitors. In the first assay, interaction between biotin-tagged FF peptide and the streptavidin labelled gold nanoparticles (s-AuNPs) were used. In another assay, thiol-Au interactions were used to develop an assay for detection of amyloid inhibitors. It is envisaged that the proposed analytical method will provide a simple, facile and cost effective technique for the screening of amyloid inhibitors and may be of immense practical implications to find the therapeutic remedies for the diseases associated with the protein aggregation.

scholarly journals Conversion of sequence-characterized amplified region (SCAR) bands into high-throughput DNA markers based on RAPD technique for detection of the stem nematode Ditylenchus dipsaci in crucial plant hosts

2008 ◽  
Vol 53 (No. 3) ◽  
pp. 97-104 ◽  
Author(s):  
M. Zouhar ◽  
M. Marek ◽  
O. Douda ◽  
J. Mazáková ◽  
P. Ryšánek
Keyword(s):  
Cost Effective ◽  
Healthy Plant ◽  
Host Preferences ◽  
Sequence Characterized Amplified Region ◽  
Detection And Identification ◽  
Plant Hosts ◽  
Cost Effective Technique ◽  
Ditylenchus Dipsaci ◽  
Species Specific ◽  
Template Dna

<i>Ditylenchus dipsaci</i>, the stem nematode, is a migratory endoparasite of over 500 species of angiosperms. The main method of <i>D. dipsaci</i> control is crop rotation, but the presence of morphologically indistinguishable host races with different host preferences makes rotation generally ineffective. Therefore, a sensitive, rapid, reliable, as well as cost effective technique is needed for identification of <i>D. dipsaci</i> in biological samples. This study describes the development of species-specific pairs of PCR oligonucleotides for detection and identification of the <i>D. dipsaci</i> stem nematode in various plant hosts. Designed DIT-2 primer pair specifically amplified a fragment of 325 bp, while DIT-5 primer pair always produced a fragment of 245 bp in all <i>D. dipsaci</i> isolates. Two developed SCAR primer pairs were further tested using template DNA extracted from a collection of twelve healthy plant hosts; no amplification was however observed. The developed PCR protocol has proved to be quite sensitive and able to specifically detect <i>D. dipsaci</i> in artificially infested plant tissues.

Bucket handle meniscus tears in low-resource settings can be successfully treated with a cost-effective technique

2021 ◽  
Author(s):  
Allicia Ostoposides Imada ◽  
James J. O’Hara ◽  
Ignacio L. Proumen ◽  
Pablo S. Molinari ◽  
Daniel C. Wascher ◽  
...  
Keyword(s):  
Cost Effective ◽  
Effective Technique ◽  
Low Resource Settings ◽  
Low Resource ◽  
Meniscus Tears ◽  
Cost Effective Technique ◽  
Bucket Handle

scholarly journals Simple, cost-effective technique for portable digital eletrocorticography

2000 ◽  
Vol 58 (2B) ◽  
pp. 424-427 ◽  
Author(s):  
PAULO R. M. DE BITTENCOURT ◽  
MARCOS C. SANDMANN ◽  
MARLUS S. MORO ◽  
JOÃO C. DE ARAÚJO
Keyword(s):  
Real Time ◽  
Epilepsy Surgery ◽  
Vascular Malformations ◽  
Cost Effective ◽  
New Method ◽  
Cortical Lesions ◽  
Effective Technique ◽  
Seizure Disorders ◽  
Operational Costs ◽  
Cost Effective Technique

We revised 16 patients submitted to epilepsy surgery using a new method of digital, real-time, portable electrocorticography. Patients were operated upon over a period of 28 months. There were no complications. The exam was useful in 13 cases. The low installation and operational costs, the reliability and simplicity of the method, indicate it may be useful for defining the epileptogenic regions in a variety of circumnstances, including surgery for tumors, vascular malformations, and other cortical lesions associated with seizure disorders.

Formation of Periodical Sub-Micron Sized Structures on Silicon by Interfered Nanosecond Laser Pulses

2010 ◽  
Vol 97-101 ◽  
pp. 3803-3806
Author(s):  
Yong Xiang Hu ◽  
Heng Zhang ◽  
Zheng Qiang Yao
Keyword(s):  
Cost Effective ◽  
Laser Pulses ◽  
Laser Beams ◽  
Nanosecond Laser ◽  
Effective Technique ◽  
First Order ◽  
Direct Fabrication ◽  
Cost Effective Technique ◽  
Nanosecond Laser Pulses ◽  
Micro Structuring

Laser interference micro-structuring is a relatively efficient and cost-effective technique for fabricating periodical micro-nano-structuring surfaces. The direct fabrication of sub-micron sized dot array on silicon was performed by four interfering nanosecond laser beams with a diffractive beam splitter. The mechanism to form the dot array was analyzed and it was found that the obtained conical dot array had a negative shape of the interference pattern of four laser beams. A second-order peak between two first-order peaks also occurred due to the liquid-solid expansion.

Telemedicine in the control of intra-ocular pressure

2000 ◽  
Vol 6 (1_suppl) ◽  
pp. 126-128 ◽  
Author(s):  
G Michelson ◽  
W Striebel ◽  
W Prihoda ◽  
Volker Schmidt
Keyword(s):  
Cost Effective ◽  
Western World ◽  
Pressure Curve ◽  
Effective Technique ◽  
Intra Ocular Pressure ◽  
Continuous Evaluation ◽  
Common Causes ◽  
Cost Effective Technique ◽  
Email Message ◽  
Ocular Pressure

Glaucoma is one of the most common causes of blindness in the Western world and a major risk factor is increased intra-ocular pressure. We therefore used telemedicine in its control. Patients measured their intra-ocular pressure several times a day with a portable instrument and the values were then entered into a portable digital assistant. These data were transmitted by a modem to a central server. If the intra-ocular pressure was pathologically high, an email message was automatically sent to the ophthalmologist. The pressure curve, including a statistical analysis, was displayed in an easily readable chart format. Ten patients with glaucoma participated in a trial. Self-tonometry with telemedicine enabled continuous evaluation of the patient by the ophthalmologist. This approach offered the advantage of controlling the treatment remotely. Advantages for the patient were that the measurements were easily done at home under normal conditions, and the patient could control when the measurement and data transmission would be performed. Telemedicine is a cost-effective technique enabling the early diagnosis of pathologically increased intra-ocular pressure.

Drywall Thermal Properties Exposed to High Temperatures and Fire Condition

2013 ◽  
Vol 62 (1) ◽  
Author(s):  
Md Azree Othuman Mydin
Keyword(s):  
Thermal Properties ◽  
High Temperatures ◽  
Fire Resistance ◽  
Residential Buildings ◽  
Cost Effective ◽  
Standard Fire ◽  
Performance Requirements ◽  
Cost Effective Technique ◽  
Fire Barrier ◽  
In Fire

Drywall is a widespread fire barrier used in house and general building construction. Drywall partitions and ceiling membranes are possibly the most common fire resistant construction approach employed in an extensive range of building types. The utilization of drywall board as prime fire protection of light-flame wood or steel construction is ubiquitous. Drywall board based systems are among those now broadly used, as walls or ceilings and it is principally employed as lining material in light-weight construction, which is a competent and cost effective technique of providing flexible partitioning assemblies in commercial and residential buildings. The thickness of the drywall board lining and the configuration of the framing can be flexibly changed to meet specified fire performance requirements. The use of such systems is increasing every day and there demands to be more research on their properties and behaviour. This paper will presents the properties of drywall board which will includes the assemblies and standard fire tests and the thermal properties of drywall in general and includes suggested properties of drywall by different researchers. Drywall boards shrink and crack at high temperatures, and this leads to collapse of parts of the drywall boards in fire. Fall-off of gypsum in fire affects the fire resistance of the assembly considerably, and cannot be overlooked when evaluating the fire resistance of drywall assemblies

Sign in / Sign up

Export Citation Format

Share Document