scholarly journals Use of Chemically Treated Human Hair Wastes for the Removal of Heavy Metal Ions from Water

Water ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1263
Author(s):  
Helan Zhang ◽  
Fernando Carrillo-Navarrete ◽  
Montserrat López-Mesas ◽  
Cristina Palet
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Human Hair ◽  
Heavy Metal Ions ◽  
Low Cost ◽  
Waste Product ◽  
Raw Material ◽  
Order Kinetic ◽  
Biosorption Process ◽  
Equilibrium Data

Human hair is considered a ubiquitous waste product and its accumulation can cause environmental problems. Hence, the search for alternatives that take advantage of this waste as a new raw material is of interest, and contributes to the idea of the circular economy. In this study, chemically modified human hair was used as a low cost biosorbent for the removal of heavy metal ions from aqueous solutions. The effect of the contact time, the pH, and the biosorbent concentration on the biosorption process were investigated. Kinetic modeling indicated that the pseudo-second order kinetic equation fitted well with R2 > 0.999. Furthermore, the equilibrium data fitted the Langmuir adsorption isotherm at 295 K resulting in saturation concentrations of 9.47 × 10−5, 5.57 × 10−5, 3.77 × 10−5, and 3.61 × 10−5 mol/g for the sorption of Cr(III), Cu(II), Cd(II), and Pb(II), respectively. The biosorption process did not change the chemical structure and morphology of the hair, which was shown by FTIR and SEM. In addition, desorption experiments prove that 0.1 mol/L EDTA solution is an efficient eluent for the recovery of Pb(II) from the treated human hair. To summarize, treated human hair showed satisfactory biosorption capacity and can be considered as an effective biosorbent for the treatment of water with a low concentration of heavy metal ions.

scholarly journals Research on the Adsorption Behavior of Heavy Metal Ions by Porous Material Prepared with Silicate Tailings

Minerals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 291 ◽  
Author(s):  
Dongxiao Ouyang ◽  
Yuting Zhuo ◽  
Liang Hu ◽  
Qiang Zeng ◽  
Yuehua Hu ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Porous Material ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Low Cost ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
New Thought ◽  
Adsorption Models ◽  
Kinetics Of

Tailings generated from mineral processing have attracted worldwide concerns due to creating serious environmental pollution. In this work, porous adsorbents were prepared as a porous block by using silicate tailings, which can adsorb heavy metal ions from the solution and are easy to separate. The synthesized silicate porous material (SPM) was characterized by X-ray diffraction (XRD), Brunner–Emmet–Teller (BET), and scanning electron microscope (SEM). The material presented a surface area of 3.40 m2⸱g−1, a porosity of 54%, and the compressive strength of 0.6 MPa. The maximum adsorption capacities of Pb2+, Cd2+, and Cu2+ by SPM were 44.83 mg·g−1, 35.36 mg·g−1, and 32.26 mg·g−1, respectively. The experimental data were fitted well by the Freundlich and Langmuir adsorption models. The kinetics of the adsorption process were fitted well by the pseudo-first order kinetic equation. These results show that the porous materials prepared with silicate tailings could act as an effective and low-cost adsorbent for the removal of heavy metal ions from wastewater. This study may provide a new thought on the high-value utilization of tailing for alleviating environmental pressure.

Synthesis and Characterization of Carbon/Bentonite Composite

2012 ◽  
Vol 549 ◽  
pp. 703-706
Author(s):  
De Yi Zhang ◽  
Jing Wu ◽  
Bai Yi Chen ◽  
He Ming Luo ◽  
Kun Jie Wang ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Heavy Metal Ions ◽  
Low Cost ◽  
Raw Material ◽  
Hydroxyl Groups ◽  
Carbon Particles ◽  
Prepared Composite

In this paper, a novel carbon/bentonite composite was prepared using sucrose as carbon source and bentonite as raw material. The characterization results shown that plenty of carbon particles distribute on the surface of the composite, and an abundant of functional groups, such as SO3H, carboxylic and hydroxyl groups, were successfully introduced onto the surface of the prepared composite. The adsorption capacity of the prepared composite for typical heavy metal ions and methylene blue deys also was investigated and compared with activated carbon and bentonite, the results show that the composite shows excellent adsorprion performance for heavy metal ions, and the adsorption capacity for Cu2+and Ni2+ increase by 136% and 591% than natural bentonite, respectSuperscript textively. The prepared composite with excellent adsorption performance could be used as a low-cost alternative to activated carbon for the treatment of heavy metal ions polluted wastewater.

scholarly journals Removal of Zn(II), Mn(II) and Cu(II) by adsorption onto banana stalk biochar: adsorption process and mechanisms

2020 ◽  
Vol 82 (12) ◽  
pp. 2962-2974
Author(s):  
Hua Deng ◽  
Qiuyan Li ◽  
Meijia Huang ◽  
Anyu Li ◽  
Junyu Zhang ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Photoelectron Spectroscopy ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Order Kinetic ◽  
Solution Ph ◽  
X Ray

Abstract Low-cost banana stalk (Musa nana Lour.) biochar was prepared using oxygen-limited pyrolysis (at 500 °C and used), to remove heavy metal ions (including Zn(II), Mn(II) and Cu(II)) from aqueous solution. Adsorption experiments showed that the initial solution pH affected the ability of the biochar to adsorb heavy metal ions in single- and polymetal systems. Compared to Mn(II) and Zn(II), the biochar exhibited highly selective Cu(II) adsorption. The adsorption kinetics of all three metal ions followed the pseudo-second-order kinetic equation. The isotherm data demonstrated the Langmuir model fit for Zn(II), Mn(II) and Cu(II). The results showed that the chemical adsorption of single molecules was the main heavy metal removal mechanism. The maximum adsorption capacities (mg·g−1) were ranked as Cu(II) (134.88) > Mn(II) (109.10) > Zn(II) (108.10)) by the single-metal adsorption isotherms at 298 K. Moreover, characterization analysis was performed using Fourier transform infrared spectroscopy, the Brunauer-Emmett-Teller method, scanning electron microscopy with energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The results revealed that ion exchange was likely crucial in Mn(II) and Zn(II) removal, while C-O, O-H and C = O possibly were key to Cu(II) removal by complexing or other reactions.

Preparation and Characterisation of Sulfonic Acid-Functionalized Carbon/Loess Composite

2011 ◽  
Vol 194-196 ◽  
pp. 1652-1655 ◽  
Author(s):  
De Yi Zhang ◽  
Ying Ma ◽  
Yi Wang ◽  
Hui Xia Feng ◽  
Jiao Chen ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Sulfonic Acid ◽  
Heavy Metal Ions ◽  
Low Cost ◽  
Raw Material ◽  
Carbon Particles ◽  
Prepared Composite

In this paper, a novel sulfonic acid-functionalized carbon/loess composite was prepared using sucrose as carbon source and loess as raw material. The characterization results shown that plenty of carbon particles distribute on the surface of the composite, and an abundant of SO3H groups were successfully introduced onto the surface of the prepared composite through incomplete carbonization of sucrose and sulfonation of carbon particles. The adsorption capacity of the prepared composite for typical heavy metal ions also was investigated and compared with activated carbon, the results show that the composite shows excellent adsorprion performance, and the adsorption capacity for Fe3+, Pb2+, Cu2+, Cd2+, Ni2+can reach about 412%, 249%, 153%, 134% and 120% of the capacity of activated carbon, respectively. The prepared composite with excellent adsorption performance could be used as a low-cost alternative to activated carbon for the removal of heavy metal ions from wastewater.

Comparison of the fixation of several metal ions onto a low-cost biopolymer

2002 ◽  
Vol 2 (5-6) ◽  
pp. 217-224 ◽  
Author(s):  
Z. Reddad ◽  
C. Gérente ◽  
Y. Andrès ◽  
P. Le Cloirec
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Low Cost ◽  
Operating Conditions ◽  
Order Kinetic ◽  
Adsorption Mechanisms ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Beet Pulp ◽  
Removal Of Metal Ions

In the present work, sugar beet pulp, a common waste from the sugar refining industry, was studied in the removal of metal ions from aqueous solutions. The ability of this cheap biopolymer to sorb several metals namely Pb2+, Cu2+, Zn2+, Cd2+ and Ni2+ in aqueous solutions was investigated. The metal fixation capacities of the sorbent were determined according to operating conditions and the fixation mechanisms were identified. The biopolymer has shown high elimination rates and interesting metal fixation capacities. A pseudo-second-order kinetic model was tested to investigate the adsorption mechanisms. The kinetic parameters of the model were calculated and discussed. For 8 × 10-4 M initial metal concentration, the initial sorption rates (v0) ranged from 0.063 mmol.g-1.min-1 for Pb2+ to 0.275 mmol.g-1.min-1 for Ni2+ ions, with the order: Ni2+ > Cd2+ > Zn2+ > Cu2+ > Pb2+. The equilibrium data fitted well with the Langmuir model and showed the following affinity order of the material: Pb2+ > Cu2+ > Zn2+ > Cd2+ > Ni2+. Then, the kinetic and equilibrium parameters calculated qm and v0 were tentatively correlated to the properties of the metals. Finally, equilibrium experiments in multimetallic systems were performed to study the competition of the fixation of Pb2+, Zn2+ and Ni2+ cations. In all cases, the metal fixation onto the biopolymer was found to be favourable in multicomponent systems. Based on these results, it is demonstrated that this biosorbent represents a low-cost solution for the treatment of metal-polluted wastewaters.

scholarly journals Rapid removal of heavy metal ions from aqueous solutions by low cost adsorbents

2012 ◽  
Vol 12 (2/3/4) ◽  
pp. 318 ◽  
Author(s):  
Ali Ahmadpour ◽  
Tahereh Rohani Bastami ◽  
Masumeh Tahmasbi ◽  
Mohammad Zabihi
Keyword(s):  
Heavy Metal ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Low Cost ◽  
Rapid Removal

scholarly journals Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 315 ◽  
Author(s):  
Musa Yahaya Pudza ◽  
Zurina Zainal Abidin ◽  
Suraya Abdul Rashid ◽  
Faizah Md Yasin ◽  
A. S. M. Noor ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Carbon Dots ◽  
Heavy Metal Ions ◽  
Active Sites ◽  
Adsorption Process ◽  
Coefficient Of Determination ◽  
Aqueous Environment ◽  
Order Kinetic ◽  
Sensing Applications

The materials and substances required for sustainable water treatment by adsorption technique, are still being researched widely by distinguished classes of researchers. Thus, the need to synthesize substances that can effectively clean up pollutants from the environment cannot be overemphasized. So far, materials in bulk forms that are rich in carbon, such as biochar and varieties of activated carbon have been used for various adsorptive purposes. The use of bulk materials for such purposes are not efficient due to minimal surface areas available for adsorption. This study explores the adsorption task at nano dimension using carbon dots (CDs) from tapioca. The properties of carbon structure and its influence on the adsorptive efficacy of carbon nanoparticles were investigated by energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HrTEM), and atomic force microscopy (AFM). The results implied carbon present in CDs are good adsorbents for effective adsorption of heavy metal ions (lead) with removal efficiency of 80.6% in aqueous environment. The adsorption process as explored by both Langmuir and Freundlich isotherms have proven favorability of the adsorption process. Langmuir form two and three have correlation coefficients R2 at 0.9922 and 0.9912, respectively. The Freundlich isotherm confirms CDs as having defined surface heterogeneity and the exponential distribution of active sites. The adsorption of lead unto CDs obeyed the second order kinetic model with coefficient of determination, R2 of 0.9668 and 0.9996 at an initial lead concentration of 20 mg/L and 100 mg/L, respectively. The findings validated the efficiency of CDs derived from tapioca as an excellent material for further utilization in the environmental fields of wastewater pollution detection and clean up, bio-imaging, and chemical sensing applications.

Study on the Performance of the Ionic Liquids [Emim]CH3SO3 and [Emim]PF6 to Prepare the Biosensor of the Detection of Heavy Metals in Seawater

2017 ◽  
Vol 20 (1) ◽  
pp. 013-020 ◽  
Author(s):  
Xuhui Ma ◽  
Shipeng Zhao ◽  
Shuping Zhang
Keyword(s):  
Heavy Metal ◽  
Ionic Liquid ◽  
Ionic Liquids ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Electrochemical Sensors ◽  
Low Cost ◽  
Sensor Applications ◽  
Electrochemical Window ◽  
Significant Difference

Electrochemical sensors can detect the heavy metal ions in seawater quickly, conveniently and accurately with the advantages such as the fast detection speed, the simple operability and the low cost. The ionic liquid [Emim]CH3SO3 showed excellent electrochemical performance and could meet the initial application requirements as electrochemical sensors. The characters of the ionic liquids [Emim]CH3SO3 and [Emim]PF6 which include IR, LC-MS, conductivity, electrochemical window and viscosity were detected. The influ-ence of trace impurity on the conductivity of the ionic liquids was investigated. Results suggested that the conductivity of the ionic liquids increased with the concentration of the added organic solvents. In addition, though the conductivity of the ionic liquids increased with temperature, there is no significant difference in the influence of the same impurity at varying temperatures. Muti Walls Carbon Nanotubes (MWCNTs) are appropriate materials which are commonly used materials for electrochemical sensor applications. The effect of theImidaz-olium-based ionic liquids on the performance of the conductivity of the MWCNTs was studied. It was found that Ionic liquid is an excellent extraction agent for metal ions and its presence in the sensor system improves significantly the detection of heavy metal ions.

Sign in / Sign up

Export Citation Format

Share Document