scholarly journals Assessment of the Nonlinear Flow Characteristic of Water Inrush Based on the Brinkman and Forchheimer Seepage Model

Water ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 855 ◽  
Author(s):  
Yi Xue ◽  
Yang Liu ◽  
Faning Dang ◽  
Jia Liu ◽  
Zongyuan Ma ◽  
...  
Keyword(s):  
Flow Field ◽  
Water Flow ◽  
Construction Projects ◽  
Underground Mining ◽  
Fractured Rock ◽  
Flow Behavior ◽  
Water Inrush ◽  
Nonlinear Flow ◽  
Fault Permeability ◽  
Forchheimer Flow

Underground fault water inrush is a hydrogeological disaster that frequently occurs in underground mining and tunnel construction projects. Groundwater may pour from an aquifer when disasters occur, and aquifers are typically associated with fractured rock formations. Water inrush accidents are likely to occur when fractured rock masses are encountered during excavation. In this study, Comsol Multiphysics, cross-platform multiphysics field coupling software, was used to simulate the evolution characteristics of water flow in different flow fields of faults and aquifers when water inrush from underground faults occurs. First, the Darcy and Brinkman flow field nonlinear seepage models were used to model the seepage law of water flow in aquifers and faults. Second, the Forchheimer flow field was used to modify the seepage of fluid in fault-broken rocks in the Brinkman flow field. In general, this phenomenon does not meet the applicable conditions of Darcy’s formula. Therefore, the Darcy and Forchheimer flow models were coupled in this study. Simulation results show that flow behavior in an aquifer varies depending on fault permeability. An aquifer near a fault is likely to be affected by non-Darcy flow. That is, the non-Darcy effect zone will either increase or decrease as fault permeability increases or decreases. The fault rupture zone that connects the aquifer and upper roadway of the fault leads to fault water inrush due to the considerably improved permeability of the fractured rock mass.

scholarly journals Evaluation of the Non-Darcy Effect of Water Inrush from Karst Collapse Columns by Means of a Nonlinear Flow Model

Water ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1234 ◽  
Author(s):  
Yi Xue ◽  
Teng Teng ◽  
Lin Zhu ◽  
Mingming He ◽  
Jie Ren ◽  
...  
Keyword(s):  
Construction Projects ◽  
Numerical Solutions ◽  
Water Inrush ◽  
Nonlinear Flow ◽  
Karst Collapse ◽  
Viscous Resistance ◽  
Mining Operations ◽  
Flow Process ◽  
Mining Work ◽  
Forchheimer Flow

Karst collapse columns (KCCs) are naturally formed geological structures that are widely observed in North China. Given their influence on normal mining operations and the progress of mining work, collapse columns pose a hidden danger in coal mining under the influence of manual mining. By communicating often with the aquifer, the water inrush from KCCs poses a serious threat to construction projects. This paper adopts three flow field models, namely, Darcy aquifer laminar flow, Forchheimer flow, and Navier–Stokes turbulent flow, based on the changes in the water inrush flow pattern in the aquifer and laneway, and uses COMSOL Multiphysics software to produce the numerical solutions of these models. As the water inrush flow velocity increases, the Forchheimer flow shows the effect of additional force (inertial resistance) on flow in KCCs, in addition to the effect of viscous resistance. After the joint action of viscous resistance and inertial resistance, the inertial resistance ultimately dominates and gradually changes the water inrush from the KCCs to fluid seepage. Forchheimer flow can comprehensively reflect the nonlinear flow process in the broken rock mass of KCCs, demonstrate the dynamic process from the Darcy aquifer to the final tunnel turbulence layer, and quantitatively show the changes in the flow patterns of the water inrush from KCCs.

scholarly journals A Coupled Nonlinear Flow Model for Particle Migration and Seepage Properties of Water Inrush through Broken Rock Mass

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Wenhao Shi ◽  
Tianhong Yang
Keyword(s):  
Rock Mass ◽  
Small Particle ◽  
High Velocity ◽  
Flow Behavior ◽  
Water Inrush ◽  
Particle Migration ◽  
Nonlinear Flow ◽  
Rock Mass Structure ◽  
Proposed Model ◽  
Seepage Properties

A large number of statistics indicate that broken rock mass always transforms into a flowing channel and leads to water inrush disasters in mining engineering, such as fault, karst, and strongly weathered rock mass. During the process of water inrush, the structure of the broken rock mass is constantly changing due to seepage erosion under high-velocity flow. Therefore, it is of vital importance to quantitatively evaluate the flow behavior of the water inrush related to the seepage erosion in order to prevent or reduce the risks. This study described a coupled nonlinear flow model, which couples the high-velocity seepage, the small particle migration, and the evolution of the broken rock mass structure. The model was verified firstly for simulation of nonlinear flow behavior by comparing with the traditional one. Then, the proposed model was used to simulate the evolution of particle migration and seepage properties of the water inrush through broken rock mass by a numerical case. The simulation results generally agree well with the existing experimental results. The simulations indicate that small particle migration causes the unstable characteristics of the seepage and the heterogeneity properties of the broken rock mass, which lead to the nonlinear flow behavior of the water inrush in both time and space. From a different perspective, it also indicates that the proposed model is capable of simulating the interaction of high-velocity seepage, small particle migration, and evolution of broken rock mass structure in the process of water inrush.

scholarly journals A Coupled Thermal-Hydraulic-Mechanical Nonlinear Model for Fault Water Inrush

Processes ◽  
2018 ◽  
Vol 6 (8) ◽  
pp. 120 ◽  
Author(s):  
Weitao Liu ◽  
Jiyuan Zhao ◽  
Ruiai Nie ◽  
Yuben Liu ◽  
Yanhui Du
Keyword(s):  
Numerical Simulation ◽  
Fault Zone ◽  
Water Flow ◽  
Water Inrush ◽  
Great Influence ◽  
Simulation Method ◽  
Coupling Model ◽  
Flow Equation ◽  
Nonlinear Flow ◽  
Flow Process

A coupled thermal-nonlinear hydraulic-mechanical (THM) model for fault water inrush was carried out in this paper to study the water-rock-temperature interactions and predict the fault water inrush. First, the governing equations of the coupled THM model were established by coupling the particle transport equation, nonlinear flow equation, mechanical equation, and the heat transfer equation. Second, by setting different boundary conditions, the mechanical model, nonlinear hydraulic-mechanical (HM) coupling model, and the thermal-nonlinear hydraulic-mechanical (THM) coupling model were established, respectively. Finally, a numerical simulation of these models was established by using COMSOL Multiphysics. Results indicate that the nonlinear water flow equation could describe the nonlinear water flow process in the fractured zone of the fault. The mining stress and the water velocity had a great influence on the temperature of the fault zone. The temperature change of the fault zone can reflect the change of the seepage field in the fault and confined aquifer. This coupled THM model can provide a numerical simulation method to describe the coupled process of complex geological systems, which can be used to predict the fault water inrush induced by coal mining activities.

Groundwater flow simulation and its application in GaoSong ore field, China

2018 ◽  
Vol 10 (2) ◽  
pp. 276-284 ◽  
Author(s):  
Gang Chen ◽  
Shiguang Xu ◽  
Chunxue Liu ◽  
Lei Lu ◽  
Liang Guo
Keyword(s):  
Numerical Model ◽  
Flow Field ◽  
Groundwater Flow ◽  
Mine Water ◽  
Permeability Coefficient ◽  
Water Inrush ◽  
Seepage Field ◽  
Groundwater Seepage ◽  
Calculation Results ◽  
Groundwater Flow Field

Abstract Mine water inrush is one of the important factors threatening safe production in mines. The accurate understanding of the mine groundwater flow field can effectively reduce the hazards of mine water inrush. Numerical simulation is an important method to study the groundwater flow field. This paper numerically simulates the groundwater seepage field in the GaoSong ore field. In order to ensure the accuracy of the numerical model, the research team completed 3,724 field fissure measurements in the study area. The fracture measurement results were analyzed using the GEOFRAC method and the whole-area fracture network data were generated. On this basis, the rock mass permeability coefficient tensor of the aquifer in the study area was calculated. The tensor calculation results are used in the numerical model of groundwater flow. After calculation, the obtained numerical model can better represent the groundwater seepage field in the study area. In addition, we designed three different numerical models for calculation, mainly to explore the influence of the tensor assignment of permeability coefficient on the calculation results of water yield of the mine. The results showed that irrational fathom tensor assignment would cause a significant deviation in calculation results.

The Unsteady Flow Field of a Purged High Pressure Turbine Based on Mode Detection

2017 ◽  
Author(s):  
S. Zerobin ◽  
S. Bauinger ◽  
A. Marn ◽  
A. Peters ◽  
F. Heitmeir ◽  
...  
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Unsteady Flow ◽  
Flow Behavior ◽  
Low Pressure ◽  
Pressure Probe ◽  
Special Focus ◽  
High Pressure Turbine ◽  
Low Pressure Turbine ◽  
Mode Detection

This paper presents an experimental study of the unsteady flow field downstream of a high pressure turbine with ejected purge flows, with a special focus on a flow field discussion using the mode detection approach according to the theory of Tyler and Sofrin. Measurements were carried out in a product-representative one and a half stage turbine test setup, which consists of a high-pressure turbine stage followed by an intermediate turbine center frame and a low-pressure turbine vane row. Four independent purge mass flows were injected through the forward and aft cavities of the unshrouded high-pressure turbine rotor. A fast-response pressure probe was used to acquire time-resolved data at the turbine center frame duct inlet and exit. The interactions between the stator, rotor, and turbine center frame duct are identified as spinning modes, propagating in azimuthal direction. Time-space diagrams illustrate the amplitude variation of the detected modes along the span. The composition of the unsteadiness and its major contributors are of interest to determine the role of unsteadiness in the turbine center frame duct loss generation mechanisms and to avoid high levels of blade vibrations in the low-pressure turbine which can in turn result in increased acoustic emissions. This work offers new insight into the unsteady flow behavior downstream of a purged high-pressure turbine and its propagation through an engine-representative turbine center frame duct configuration.

scholarly journals Towards Investigation of External Oil Flow From a Journal Bearing in an Epicyclic Gearbox

2017 ◽  
Author(s):  
Martin Berthold ◽  
Hervé Morvan ◽  
Colin Young ◽  
Richard Jefferson-Loveday
Keyword(s):  
Flow Field ◽  
Journal Bearing ◽  
Numerical Models ◽  
Flow Behavior ◽  
Phase Interface ◽  
Journal Bearings ◽  
Field Behavior ◽  
Oil Flow ◽  
Inlet Conditions ◽  
Near Wall

High loads and bearing life requirements make journal bearings the preferred choice for use in high power, epicyclic gearboxes in jet engines. In contrast to conventional, non-orbiting journal bearings in epicyclic star gearboxes, the kinematic conditions in epicyclic planetary arrangements are much more complex. With the planet gears rotating about their own axis and orbiting around the sun gear, centrifugal forces generated by both motions interact with each other and affect the external flow behavior of the oil exiting the journal bearing. This paper presents a literature and state-of-the-art knowledge review to identify existing work performed on cases similar to external journal bearing oil flow. In order to numerically investigate external journal bearing oil flow, an approach to decompose an actual journal bearing into simplified models is proposed. Later, these can be extended in a step-wise manner to allow key underlying physical phenomena to be identified. Preliminary modeling considerations will also be presented. This includes assessing different geometrical inlet conditions with the aim of minimizing computational requirements and different numerical models for near-wall treatment. The correct choice of near-wall treatment models is particularly crucial as it determines the bearing’s internal and external thermal behavior and properties. The findings and conclusions are used to create a three dimensional (3D), two-component computational fluid dynamic (CFD) sector model with rotationally periodic boundaries of the most simplistic approximation of an actual journal bearing: a non-orbiting representation, rotating about its own axis, with a circumferentially constant, i.e. concentric, lubricating gap. The inlet boundary conditions for simulating the external oil flow are generated by partly simulating the internal oil flow within the lubricating gap. In order to track the phase interface between the oil and the air surrounding the bearing, the Volume of Fluid (VoF) method is used. The quality of the CFD simulations of the domain of interest is not only dependent on the accuracy of the inlet conditions, but is also dependent on the computational mesh type, cell count, cell shape and numerical methods used. External journal bearing oil flow was simulated with a number of different mesh densities and the effect on the flow field behavior will be discussed. Two different operating temperatures, representing low and high viscosity oil, were used and their effect on the flow field behavior will also be assessed. In order to achieve the future objective of creating a design tool for routine use, key areas will be identified in which further progress is required. This includes the need to progressively increase the model fidelity to eventually simulate an orbiting journal bearing in planetary configuration with an eccentric, i.e. convergent-divergent, lubricating gap.

Sign in / Sign up

Export Citation Format

Share Document