scholarly journals Impacts of Introducing Remote Sensing Soil Moisture in Calibrating a Distributed Hydrological Model for Streamflow Simulation

Water ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 666 ◽  
Author(s):  
Lihua Xiong ◽  
Ling Zeng
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Objective Function ◽  
Hydrological Model ◽  
Distributed Hydrological Model ◽  
Soil Moisture Data ◽  
Streamflow Data ◽  
The Impact ◽  
Hydrological Variables ◽  
Streamflow Simulation

With the increased availability of remote sensing products, more hydrological variables (e.g., soil moisture and evapotranspiration) other than streamflow data are introduced into the calibration procedure of a hydrological model. However, how the incorporation of these hydrological variables influences the calibration results remains unclear. This study aims to analyze the impact of remote sensing soil moisture data in the joint calibration of a distributed hydrological model. The investigation was carried out in Qujiang and Ganjiang catchments in southern China, where the Dem-based Distributed Rainfall-runoff Model (DDRM) was calibrated under different calibration schemes where the streamflow data and the remote sensing soil moisture are assigned to different weights in the objective function. The remote sensing soil moisture data are from the SMAP L3 soil moisture product. The results show that different weights of soil moisture in the objective function can lead to very slight differences in simulation performance of soil moisture and streamflow. Besides, the joint calibration shows no apparent advantages in terms of streamflow simulation over the traditional calibration using streamflow data only. More studies including various remote sensing soil moisture products are necessary to access their effect on the joint calibration.

scholarly journals Integrating remote sensing-derived evapotranspiration and ground-monitored discharge data for the improvement of hydrological modelling: A case study of the Sekong River Basin

2021 ◽  
Author(s):  
Raksmey Ang ◽  
S. Shrestha ◽  
Salvatore Virdis ◽  
Saurav KC
Keyword(s):  
Remote Sensing ◽  
Model Calibration ◽  
Hydrological Model ◽  
Hydrologic Model ◽  
Physically Based Model ◽  
Physically Based ◽  
Streamflow Data ◽  
The Impact ◽  
Streamflow Simulation ◽  
Calibration Approach

This study analyses the efficiency of integrating remotely sensed evapotranspiration into the process of hydrological model calibration. A joint calibration approach, employing both remote sensing-derived evapotranspiration and ground-monitored streamflow data was compared with a conventional ground-monitored streamflow calibration approach through physically-based hydrological, Soil and Water Assessment Tool (SWAT) model setups. The efficacy of the two calibration schemes was investigated in two modelling setups: 1) a physically-based model with only the outlet gauge available for calibration, and 2) a physically-based model with multiple gauges available for calibration. Joint calibration was found to enhance the skill of hydrological models in streamflow simulation compared to ground-monitored streamflow-only calibration at the unsaturated zone in the upstream area, where essential information on evapotranspiration is also required. Additionally, the use of remote sensing-derived evapotranspiration can significantly improve high flow compared to low flow simulation. A more consistent model performance improvement, obtained from using remote sensing-derived evapotranspiration data was found at gauged sites not used in the calibration, due to additional information on spatial evapotranspiration in internal locations being enhanced into a process-based model. Eventually, satellite-based evapotranspiration with fine resolution was found to be competent for calibrating and validating the hydrological model for streamflow simulation in the absence of measured streamflow data for model calibration. Furthermore, the impact of using evapotranspiration for hydrologic model calibration tended to be stronger at the upstream and tributary sub-basins than at downstream sub-basins.

The Assimilation of Remote Sensing-Derived Soil Moisture Data into a Hydrological Model for the Mahanadi Basin, India

2019 ◽  
Vol 47 (8) ◽  
pp. 1357-1374 ◽  
Author(s):  
Soumya S. Behera ◽  
Bhaskar Ramchandra Nikam ◽  
Mukund S. Babel ◽  
Vaibhav Garg ◽  
Shiv Prasad Aggarwal
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Hydrological Model ◽  
Soil Moisture Data ◽  
Mahanadi Basin

scholarly journals An evaluation of the potential of Sentinel 1 for improving flash flood predictions via soil moisture–data assimilation

2017 ◽  
Vol 44 ◽  
pp. 89-100 ◽  
Author(s):  
Luca Cenci ◽  
Luca Pulvirenti ◽  
Giorgio Boni ◽  
Marco Chini ◽  
Patrick Matgen ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Spatial Resolution ◽  
Temporal Resolution ◽  
Hydrological Model ◽  
High Spatial Resolution ◽  
Flash Flood ◽  
Soil Moisture Data ◽  
Time Period ◽  
The Impact

Abstract. The assimilation of satellite-derived soil moisture estimates (soil moisture–data assimilation, SM–DA) into hydrological models has the potential to reduce the uncertainty of streamflow simulations. The improved capacity to monitor the closeness to saturation of small catchments, such as those characterizing the Mediterranean region, can be exploited to enhance flash flood predictions. When compared to other microwave sensors that have been exploited for SM–DA in recent years (e.g. the Advanced SCATterometer – ASCAT), characterized by low spatial/high temporal resolution, the Sentinel 1 (S1) mission provides an excellent opportunity to monitor systematically soil moisture (SM) at high spatial resolution and moderate temporal resolution. The aim of this research was thus to evaluate the impact of S1-based SM–DA for enhancing flash flood predictions of a hydrological model (Continuum) that is currently exploited for civil protection applications in Italy. The analysis was carried out in a representative Mediterranean catchment prone to flash floods, located in north-western Italy, during the time period October 2014–February 2015. It provided some important findings: (i) revealing the potential provided by S1-based SM–DA for improving discharge predictions, especially for higher flows; (ii) suggesting a more appropriate pre-processing technique to be applied to S1 data before the assimilation; and (iii) highlighting that even though high spatial resolution does provide an important contribution in a SM–DA system, the temporal resolution has the most crucial role. S1-derived SM maps are still a relatively new product and, to our knowledge, this is the first work published in an international journal dealing with their assimilation within a hydrological model to improve continuous streamflow simulations and flash flood predictions. Even though the reported results were obtained by analysing a relatively short time period, and thus should be supported by further research activities, we believe this research is timely in order to enhance our understanding of the potential contribution of the S1 data within the SM–DA framework for flash flood risk mitigation.

scholarly journals Surface resistance calibration for a hydrological model using evapotranspiration retrieved from remote sensing data in Nahe catchment forest area

2015 ◽  
Vol 368 ◽  
pp. 81-86
Author(s):  
W. Bie ◽  
M. C. Casper ◽  
P. Reiter ◽  
M. Vohland
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Surface Resistance ◽  
Hydrological Model ◽  
Deciduous Forest ◽  
Remote Sensing Data ◽  
Soil Surface ◽  
Distributed Hydrological Model ◽  
Forest Regions ◽  
Daily Evapotranspiration

Abstract. In this paper, a method combining graphical and statistical techniques is proposed for surface resistance calibration in a distributed hydrological model, WaSiM-ETH, by comparing daily evapotranspiration simulated by model WaSiM-ETH with corresponding daily evapotranspiration retrieved from remote sensing images. The study area locates in Nahe catchment (Rhineland-Palatinate, Germany, 4065 km2) forest regions. The remote sensing based observations are available for a very limited number of days but representative for most soil moisture conditions. By setting canopy resistance (rc) at 150 s/m, soil surface resistance (rse) at 250 s/m or at 300 s/m for deciduous forest and setting rc at 300 s/m, rse at 600 s/m or at 650 s/m for pine forest, the model exhibits its best overall performance in space and time. It is also found that with sufficient soil moisture, the model exhibits its best performance in space scale.

scholarly journals Assimilation of SMOS soil moisture into a distributed hydrological model and impacts on the water cycle variables over the Ouémé catchment in Benin

2016 ◽  
Author(s):  
Delphine J. Leroux ◽  
Thierry Pellarin ◽  
Théo Vischel ◽  
Jean-Martia Cohard ◽  
Tania Gascon ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Hydrological Model ◽  
Water Cycle ◽  
Positive Impact ◽  
In Situ Measurements ◽  
Efficiency Coefficient ◽  
Satellite Precipitation ◽  
The Impact ◽  
Hydrological Variables

Abstract. The impact of the assimilation of surface soil moisture on the simulations of the physically based hydrological model DHSVM (Distributed Hydrology Soil Vegetation Model) is investigated in this paper for a 12 000 km catchment located in Benin, West Africa. Thanks to a large number of rain gauges spread all over the entire basin, reference simulations are performed from one year of calibration (in 2010) and two years of evaluation (2011 and 2012) based on in situ measurements of streamflow at the outlet and local observations of soil moisture at different soil depths and evapotranspiration. In a second step, several satellite products (PERSIANN, TRMM-3B42RT, and CMORPH) are used instead of in situ precipitation measurements. These products bring too much water (especially PERSIANN and CMORPH), sometimes not at the correct time of the year, which has a large impact on various hydrological variables. In order to correct for the wrong amount of input water brought by the satellite precipitation products, the SMOS satellite soil moisture observations are assimilated in the hydrological model. An optimal interpolation is implemented here using an influence radius in order to replicate the field of view of the SMOS instrument. The assimilation of SMOS data shows a positive impact on the soil moisture at different depths (5, 40, and 80 cm defined in the model), with a decrease of the bias compared to the in situ measurements. Streamflow is also positively impacted with a large improvement of the Nash efficiency coefficient after assimilation (from negative to positive for PERSIANN and CMORPH). Finally, the temporal evolution of the water table depth is also greatly improved (from 0.1–0.3 to 0.8–0.9 for PERSIANN and CMORPH). This work shows that the use of satellite precipitation products into a hydrological model can lead to large errors that can be reduced by assimilating satellite soil moisture, which has a positive impact on the estimation of hydrological variables at deeper layers and at other stages of the water cycle.

scholarly journals Utilizing Satellite Surface Soil Moisture Data in Calibrating a Distributed Hydrological Model Applied in Humid Regions Through a Multi-Objective Bayesian Hierarchical Framework

2019 ◽  
Vol 11 (11) ◽  
pp. 1335 ◽  
Author(s):  
Han Yang ◽  
Lihua Xiong ◽  
Qiumei Ma ◽  
Jun Xia ◽  
Jie Chen ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Satellite Data ◽  
Hydrological Model ◽  
Distributed Model ◽  
Hydrological Models ◽  
Distributed Hydrological Model ◽  
Bayesian Hierarchical ◽  
Hierarchical Framework ◽  
Multi Objective ◽  
Soil Moisture Data

The traditional calibration objective of hydrological models is to optimize streamflow simulations. To identify the value of satellite soil moisture data in calibrating hydrological models, a new objective of optimizing soil moisture simulations has been added to bring in satellite data. However, it leads to problems: (i) how to consider the trade-off between various objectives; (ii) how to consider the uncertainty these satellite data bring in. Among existing methods, the multi-objective Bayesian calibration framework has the potential to solve both problems but is more suitable for lumped models since it can only deal with constant variances (in time and space) of model residuals. In this study, to investigate the utilization of a soil moisture product from the Soil Moisture Active Passive (SMAP) satellite in calibrating a distributed hydrological model, the DEM (Digital Elevation Model) -based Distributed Rainfall-Runoff Model (DDRM), a multi-objective Bayesian hierarchical framework is employed in two humid catchments of southwestern China. This hierarchical framework is superior to the non-hierarchical framework when applied to distributed models since it considers the spatial and temporal residual heteroscedasticity of distributed model simulations. Taking the streamflow-based single objective calibration as the benchmark, results of adding satellite soil moisture data in calibration show that (i) there is less uncertainty in streamflow simulations and better performance of soil moisture simulations either in time and space; (ii) streamflow simulations are largely affected, while soil moisture simulations are slightly affected by weights of objectives. Overall, the introduction of satellite soil moisture data in addition to observed streamflow in calibration and putting more weights on the streamflow calibration objective lead to better hydrological performance. The multi-objective Bayesian hierarchical framework implemented here successfully provides insights into the value of satellite soil moisture data in distributed model calibration.

scholarly journals Suitability of Satellite-Based Precipitation Products for Water Balance Simulations Using Multiple Observations in a Humid Catchment

2019 ◽  
Vol 11 (2) ◽  
pp. 151 ◽  
Author(s):  
Dan Zhang ◽  
Xiaomang Liu ◽  
Peng Bai ◽  
Xiang-Hu Li
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Water Balance ◽  
Spatial Patterns ◽  
Hydrological Modeling ◽  
Hydrological Model ◽  
Distributed Hydrological Model ◽  
Multiple Observations ◽  
Humid Region ◽  
Regional Water

This study assesses the suitability of five popular satellite-based precipitation products in modeling water balance in a humid region of China during the period 1998–2012. The satellite-based precipitation products show similar spatial patterns with varying degrees of overestimation or underestimation, compared with the gauged precipitation. A distributed hydrological model is used to evaluate the suitability of satellite-based precipitation products in simulating streamflow, evapotranspiration and soil moisture. The simulations of streamflow and evapotranspiration forced by the MSWEP precipitation perform best among the five satellite-based precipitation products, where the Kling-Gupta efficiency (KGE) between the simulated and observed streamflow ranges from 0.75 to 0.91, and the KGE between the simulated and observed evapotranspiration ranges from 0.46 to 0.61. However, the KGE between the simulated and observed soil moisture is negative, indicating that the performance of soil moisture simulation forced by satellite-based precipitation is poor. In addition, this study finds the spatial pattern of simulated streamflow is dominated by the distribution of precipitation, whereas the distribution of evapotranspiration and soil moisture is controlled by the parameters of the hydrological model. This study is useful for the improvement of hydrological modeling based on remote sensing and the monitoring of regional water resources.

Sign in / Sign up

Export Citation Format

Share Document