scholarly journals Utilizing Satellite Surface Soil Moisture Data in Calibrating a Distributed Hydrological Model Applied in Humid Regions Through a Multi-Objective Bayesian Hierarchical Framework

2019 ◽  
Vol 11 (11) ◽  
pp. 1335 ◽  
Author(s):  
Han Yang ◽  
Lihua Xiong ◽  
Qiumei Ma ◽  
Jun Xia ◽  
Jie Chen ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Satellite Data ◽  
Hydrological Model ◽  
Distributed Model ◽  
Hydrological Models ◽  
Distributed Hydrological Model ◽  
Bayesian Hierarchical ◽  
Hierarchical Framework ◽  
Multi Objective ◽  
Soil Moisture Data

The traditional calibration objective of hydrological models is to optimize streamflow simulations. To identify the value of satellite soil moisture data in calibrating hydrological models, a new objective of optimizing soil moisture simulations has been added to bring in satellite data. However, it leads to problems: (i) how to consider the trade-off between various objectives; (ii) how to consider the uncertainty these satellite data bring in. Among existing methods, the multi-objective Bayesian calibration framework has the potential to solve both problems but is more suitable for lumped models since it can only deal with constant variances (in time and space) of model residuals. In this study, to investigate the utilization of a soil moisture product from the Soil Moisture Active Passive (SMAP) satellite in calibrating a distributed hydrological model, the DEM (Digital Elevation Model) -based Distributed Rainfall-Runoff Model (DDRM), a multi-objective Bayesian hierarchical framework is employed in two humid catchments of southwestern China. This hierarchical framework is superior to the non-hierarchical framework when applied to distributed models since it considers the spatial and temporal residual heteroscedasticity of distributed model simulations. Taking the streamflow-based single objective calibration as the benchmark, results of adding satellite soil moisture data in calibration show that (i) there is less uncertainty in streamflow simulations and better performance of soil moisture simulations either in time and space; (ii) streamflow simulations are largely affected, while soil moisture simulations are slightly affected by weights of objectives. Overall, the introduction of satellite soil moisture data in addition to observed streamflow in calibration and putting more weights on the streamflow calibration objective lead to better hydrological performance. The multi-objective Bayesian hierarchical framework implemented here successfully provides insights into the value of satellite soil moisture data in distributed model calibration.

scholarly journals Predicting Rainfall and Runoff Through Satellite Soil Moisture Data and SWAT Modelling for a Poorly Gauged Basin in Iran

Water ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 594 ◽  
Author(s):  
Majid Fereidoon ◽  
Manfred Koch ◽  
Luca Brocca
Keyword(s):  
Soil Moisture ◽  
Hydrological Model ◽  
Assessment Tool ◽  
Swat Model ◽  
Rainfall Data ◽  
Coefficient Of Determination ◽  
Hydrological Models ◽  
Streamflow Prediction ◽  
Soil Moisture Data ◽  
Monthly Runoff

Hydrological models are widely used for many purposes in water sector projects, including streamflow prediction and flood risk assessment. Among the input data used in such hydrological models, the spatial-temporal variability of rainfall datasets has a significant role on the final discharge estimation. Therefore, accurate measurements of rainfall are vital. On the other hand, ground-based measurement networks, mainly in developing countries, are either nonexistent or too sparse to capture rainfall accurately. In addition to in-situ rainfall datasets, satellite-derived rainfall products are currently available globally with high spatial and temporal resolution. An innovative approach called SM2RAIN that estimates rainfall from soil moisture data has been applied successfully to various regions. In this study, first, soil moisture content derived from the Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E) is used as input into the SM2RAIN algorithm to estimate daily rainfall (SM2R-AMSRE) at different sites in the Karkheh river basin (KRB), southwest Iran. Second, the SWAT (Soil and Water Assessment Tool) hydrological model was applied to simulate runoff using both ground-based observed rainfall and SM2R-AMSRE rainfall as input. The results reveal that the SM2R-AMSRE rainfall data are, in most cases, in good agreement with ground-based rainfall, with correlations R ranging between 0.58 and 0.88, though there is some underestimation of the observed rainfall due to soil moisture saturation not accounted for in the SM2RAIN equation. The subsequent SWAT-simulated monthly runoff from SM2R-AMSRE rainfall data (SWAT-SM2R-AMSRE) reproduces the observations at the six gauging stations (with coefficient of determination, R² > 0.71 and NSE > 0.56), though with slightly worse performances in terms of bias (Bias) and root-mean-square error (RMSE) and, again, some systematic flow underestimation compared to the SWAT model with ground-based rainfall input. Additionally, rainfall estimates of two satellite products of the Tropical Rainfall Measuring Mission (TRMM), 3B42 and 3B42RT, are used in the calibrated SWAT- model after bias correction. The monthly runoff predictions obtained with 3B42- rainfall have 0.42 < R2 < 0.72 and−0.06 < NSE < 0.74 which are slightly better than those obtained with 3B42RT- rainfall, but not as good as the SWAT-SM2R-AMSRE. Therefore, despite the aforementioned limitations, using SM2R-AMSRE rainfall data in a hydrological model like SWAT appears to be a viable approach in basins with limited ground-based rainfall data.

A new numerical model for simulating top surface soil moisture and runoff

2018 ◽  
Vol 35 (3) ◽  
pp. 1344-1363 ◽  
Author(s):  
Jiongfeng Chen ◽  
Wan-chang Zhang
Keyword(s):  
Soil Moisture ◽  
Stream Flow ◽  
Hydrological Model ◽  
Surface Soil ◽  
Flow Simulation ◽  
Hydrological Models ◽  
Distributed Hydrological Model ◽  
Surface Soil Moisture ◽  
Content Type ◽  
Simulation Results

PurposeThis paper aims to construct a simplified distributed hydrological model based on the surveyed watershed soil properties database.Design/methodology/approachThe new established model requires fewer parameters to be adjusted than needed by former hydrological models. However, the achieved stream-flow simulation results are similar and comparable to the classic hydrological models, such as the Xinanjiang model and the TOPMODEL.FindingsGood results show that the discharge and the top surface soil moisture can be simultaneously simulated, and that is the exclusive character of this new model. The stream-flow simulation results from two moderate hydrological watershed models show that the daily stream-flow simulation achieved the classic hydrological results shown in the TOPMODEL and Xinanjiang model. The soil moisture validation results show that the modeled watershed scale surface soil moisture has general agreement with the obtained measurements, with a root-mean-square error (RMSE) value of 0.04 (m3/m3) for one of the one-measurement sites and an averaged RMSE of 0.08 (m3/m3) over all measurements.Originality/valueIn this paper, a new simplified distributed hydrological model was constructed.

scholarly journals Impacts of Introducing Remote Sensing Soil Moisture in Calibrating a Distributed Hydrological Model for Streamflow Simulation

Water ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 666 ◽  
Author(s):  
Lihua Xiong ◽  
Ling Zeng
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Objective Function ◽  
Hydrological Model ◽  
Distributed Hydrological Model ◽  
Soil Moisture Data ◽  
Streamflow Data ◽  
The Impact ◽  
Hydrological Variables ◽  
Streamflow Simulation

With the increased availability of remote sensing products, more hydrological variables (e.g., soil moisture and evapotranspiration) other than streamflow data are introduced into the calibration procedure of a hydrological model. However, how the incorporation of these hydrological variables influences the calibration results remains unclear. This study aims to analyze the impact of remote sensing soil moisture data in the joint calibration of a distributed hydrological model. The investigation was carried out in Qujiang and Ganjiang catchments in southern China, where the Dem-based Distributed Rainfall-runoff Model (DDRM) was calibrated under different calibration schemes where the streamflow data and the remote sensing soil moisture are assigned to different weights in the objective function. The remote sensing soil moisture data are from the SMAP L3 soil moisture product. The results show that different weights of soil moisture in the objective function can lead to very slight differences in simulation performance of soil moisture and streamflow. Besides, the joint calibration shows no apparent advantages in terms of streamflow simulation over the traditional calibration using streamflow data only. More studies including various remote sensing soil moisture products are necessary to access their effect on the joint calibration.

Assimilation of soil moisture data for improving streamflow prediction: Is there a role for the hydrological model structure?

2020 ◽  
Author(s):  
Aruna Kumar Nayak ◽  
Basudev Biswal ◽  
Kulamulla Parambath Sudheer
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Ensemble Kalman Filter ◽  
Hydrological Model ◽  
Assimilation Efficiency ◽  
Hydrological Models ◽  
Streamflow Forecasting ◽  
Streamflow Prediction ◽  
The Past ◽  
Soil Moisture Data

&lt;p&gt;Soil moisture data assimilation has found increased applicability in hydrology due to easily available remotely sensed soil moisture data. Numerous studies in the past have explored the possibility of assimilating soil moisture information for improving streamflow forecasting. The general understanding is that if better soil moisture data can provide better streamflow forecast. However, to our knowledge no study has so far focused on understanding if the hydrological model itself has a role in assimilation of soil moisture data. In this regard, here we use three different conceptual hydrological models for soil moisture assimilation: (1) Dynamic Budyko (DB), (2) GR4J, and (3) PDM model. Assimilation of GLDAS observed soil moisture is carried out for four MOPEX basins using Ensemble Kalman Filter. DB model&amp;#8217;s performance improved after soil moisture data assimilation for all the study basins. However, deterioration in performance was observed for GR4J and PDM for all the basins after the assimilation exercise. The performance of the assimilated models is evaluated in terms of Assimilation Efficiency (AE), which was found to be varying from 17.11 to 22.56%, from -20.98 to -41.29%, and from -8.4 to -38.23%, respectively, for DB, GR4J, and PDM. Overall, our results highlight the importance of the hydrological models structure in a soil moisture data assimilation exercise.&lt;/p&gt;

scholarly journals Multi-objective calibration of MIKE SHE with SMAP soil moisture datasets

2018 ◽  
Vol 50 (2) ◽  
pp. 644-654 ◽  
Author(s):  
Dayang Li ◽  
Zhongmin Liang ◽  
Binquan Li ◽  
Xiaohui Lei ◽  
Yan Zhou
Keyword(s):  
Soil Moisture ◽  
Root Zone ◽  
Negative Impact ◽  
Hydrological Models ◽  
Distributed Hydrological Model ◽  
Mike She ◽  
Multi Objective ◽  
The Mean ◽  
The Difference ◽  
Better Than

Abstract Root zone soil moisture plays an important role in water storage in hydrological processes. The recently launched Soil Moisture Active Passive (SMAP) mission has produced a high-resolution assimilation product of global root zone soil moisture that can be applied to improve the performance of hydrological models. In this study, we compare three calibration approaches in the Beimiaoji watershed. The first approach is single-objective calibration, in which only observed streamflow is used as a benchmark for comparison with the other approaches. The second and third approaches use multi-objective calibration based on SMAP root zone soil moisture and observed streamflow. The difference between the second and third approaches is the metric used to characterize the root zone soil moisture. The second approach applies the mean, which was commonly used in previous studies, whereas the third approach applies the hydrologic complexity μ, a dimensionless metric based on information entropy theory. These approaches are implemented to calibrate the distributed hydrological model MIKE SHE. Results show that the root zone soil moisture simulation is clearly improved, whereas streamflow simulation suffers from a slightly negative impact with multi-objective calibration. The hydrologic complexity μ performs better than the mean in capturing the features of root zone soil moisture.

scholarly journals DRYP 1.0: a parsimonious hydrological model of DRYland Partitioning of the water balance

2021 ◽  
Vol 14 (11) ◽  
pp. 6893-6917
Author(s):  
E. Andrés Quichimbo ◽  
Michael Bliss Singer ◽  
Katerina Michaelides ◽  
Daniel E. J. Hobley ◽  
Rafael Rosolem ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Water Balance ◽  
Groundwater Recharge ◽  
Overland Flow ◽  
Hydrological Model ◽  
Hydrological Models ◽  
Distributed Hydrological Model ◽  
Transmission Losses ◽  
Total Transmission ◽  
Groundwater Aquifer

Abstract. Dryland regions are characterised by water scarcity and are facing major challenges under climate change. One difficulty is anticipating how rainfall will be partitioned into evaporative losses, groundwater, soil moisture, and runoff (the water balance) in the future, which has important implications for water resources and dryland ecosystems. However, in order to effectively estimate the water balance, hydrological models in drylands need to capture the key processes at the appropriate spatio-temporal scales. These include spatially restricted and temporally brief rainfall, high evaporation rates, transmission losses, and focused groundwater recharge. Lack of available input and evaluation data and the high computational costs of explicit representation of ephemeral surface–groundwater interactions restrict the usefulness of most hydrological models in these environments. Therefore, here we have developed a parsimonious distributed hydrological model for DRYland Partitioning (DRYP). The DRYP model incorporates the key processes of water partitioning in dryland regions with limited data requirements, and we tested it in the data-rich Walnut Gulch Experimental Watershed against measurements of streamflow, soil moisture, and evapotranspiration. Overall, DRYP showed skill in quantifying the main components of the dryland water balance including monthly observations of streamflow (Nash–Sutcliffe efficiency, NSE, ∼ 0.7), evapotranspiration (NSE > 0.6), and soil moisture (NSE ∼ 0.7). The model showed that evapotranspiration consumes > 90 % of the total precipitation input to the catchment and that < 1 % leaves the catchment as streamflow. Greater than 90 % of the overland flow generated in the catchment is lost through ephemeral channels as transmission losses. However, only ∼ 35 % of the total transmission losses percolate to the groundwater aquifer as focused groundwater recharge, whereas the rest is lost to the atmosphere as riparian evapotranspiration. Overall, DRYP is a modular, versatile, and parsimonious Python-based model which can be used to anticipate and plan for climatic and anthropogenic changes to water fluxes and storage in dryland regions.

scholarly journals Predicting Rainfall and Runoff Through Satellite Soil Moisture Data and SWAT Modelling for a Poorly Gauged Basin in Iran

2018 ◽  
Author(s):  
Majid Fereidoon ◽  
Manfred Koch ◽  
Luca Brocca
Keyword(s):  
Soil Moisture ◽  
Hydrological Model ◽  
Assessment Tool ◽  
Swat Model ◽  
Rainfall Data ◽  
Coefficient Of Determination ◽  
Hydrological Models ◽  
Streamflow Prediction ◽  
Soil Moisture Data ◽  
Monthly Runoff

Hydrological models have been widely used for many purposes in water sector projects, including streamflow prediction and flood risk assessment. Among the input data used in such hydrological models, the spatial-temporal variability of rainfall datasets has a significant role on the final discharge estimation. Therefore, accurate measurements of rainfall are vital. On the other hand, ground-based measurement networks, mainly in developing countries, are either nonexistent or too sparse to capture rainfall accurately. In addition to in-situ rainfall datasets, satellite-derived rainfall products are nowadays available globally with high spatial and temporal resolution. An innovative approach called SM2RAIN that estimates rainfall from soil moisture data has been applied successfully to various regions. In this study, firstly soil moisture content derived from the Advanced Microwave Scanning Radiometer for the Earth observing system (AMSR-E) is used as input into the SM2RAIN algorithm to estimate daily rainfall, SM2R-AMSRE, at different sites in the Karkheh river basin (KRB), southwest Iran. Secondly, the SWAT (Soil and Water Assessment Tool) hydrological model is applied to simulate runoff using both ground-based observed rainfall and SM2R-AMSRE rainfall as input. The results reveal that the SM2R-AMSRE rainfall data are, in most cases, in good agreement with ground-based rainfall, with correlations R ranging between 0.58 and 0.88, though there is some underestimation of the observed rainfall, due to soil moisture saturation, not accounted for in the SM2RAIN equation. The subsequent SM2R-AMSRE- SWAT- simulated monthly runoff reproduces well the observations at the 6 gauging stations (with coefficient of determination, R&sup2; &gt; 0.72), though with slightly worse performances in terms of bias (Bias) and root-mean-square error (RMSE) and, again, some systematic flow underestimation than the SWAT model with ground-based rainfall input. Furthermore, rainfall estimations of two satellite products of the Tropical Rainfall Measuring Mission (TRMM), 3B42 and 3B42RT, are used in the calibrated SWAT- model. The monthly runoff obtained with 3B42- rainfall have 0.39&lt; R2 &lt; 0.70 and are slightly better than those obtained with 3B42RT- rainfall, but not as good as the SM2R-AMSRE- SWAT- simulated runoff above. Therefore, in spite of the afore-mentioned limitations, using SM2R-AMSRE rainfall data in a hydrological model like SWAT, appears to be a viable approach in basins with limited ground-based rainfall data.

Sign in / Sign up

Export Citation Format

Share Document