scholarly journals Characterization of the Adsorption of Cu (II) from Aqueous Solutions onto Pyrolytic Sludge-Derived Adsorbents

Water ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1816
Author(s):  
Minghui Wang ◽  
Tao Chen ◽  
Bo Yan ◽  
Lili Li ◽  
Damao Xu ◽  
...  
Keyword(s):  
Microscopic Analysis ◽  
Paper Mill ◽  
Order Kinetic ◽  
Aqueous Environments ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

The adsorption of Cu (II) onto two typical types of pyrolytic sludge was investigated in this study. The examined conditions include pH, adsorption time, and temperature, as well as the dosage of adsorbents. Results show that the adsorbents removed the Cu (II) effectively. The adsorbent made from pyrolyzed paper mill sludge (CuMS) exhibited exceptional performance, with a removal efficiency of around 100%. Moreover, the adsorption of Cu (II) onto CuMS was not affected by pH in the range of 3–9. The kinetic data showed better conformation with the pseudo-second-order kinetic model, and the adsorption processes of the CuMS fit well to the Langmuir isotherm model. The adsorption capacity reached 4.90 mg·g−1 under appropriate conditions. Microscopic analysis and FT-IR analysis revealed that the adsorbent with porous structure and high monosilicate content was beneficial to Cu (II) adsorption. Thus, the CuMS is a potentially promising candidate for retaining Cu (II) in aqueous environments.

Characterization of natural- and organobentonite by XRD, SEM, FT-IR and thermal analysis techniques and its adsorption behaviour in aqueous solutions

Clay Minerals ◽  
2012 ◽  
Vol 47 (1) ◽  
pp. 31-44 ◽  
Author(s):  
G. A. Ikhtiyarova ◽  
A. S. Özcan ◽  
Ö. Gök ◽  
A. Özcan
Keyword(s):  
Surface Area ◽  
Bet Surface Area ◽  
Maximum Adsorption Capacity ◽  
Textile Dye ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Thermal Analysis Techniques

AbstractIn this study, natural bentonite was modified with hexadecyltrimethylammonium (HDTMA) bromide to obtain organobentonite (HDTMA-bentonite). Bentonite and HDTMA-bentonite were then characterized using XRD, XRF, SEM, FT-IR, thermogravimetric (TG) analysis, elemental analysis and Brunauer-Emmett-Teller (BET) surface area techniques. The HDTMA+ cation was found to be located on the surface and enters the interlayer spaces of smectite according to the XRD and SEM results. FT-IR spectra indicated the existence of HDTMA functional groups on the bentonite surface. The BET surface area significantly decreased after the modification due to the coverage of the pores of natural bentonite. After the characterization, the adsorption of a textile dye, Reactive Blue 19 (RB19), onto bentonite and HDTMA-bentonite was investigated. The maximum adsorption capacity of HDTMA-bentonite for RB19 was 502 mg g-1 at 20°C. The adsorption process followed a pseudo-second-order kinetic model and it was exothermic and physical in nature.

Adsorption of Cu(II), Ni(II) and Zn(II) ions by nano kaolinite: Thermodynamics and kinetics studies

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Adsorption Process ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

An easy route for preparation emulsion of kaolinite (Al2Si2O5.4H2O) from Sweileh sand deposits, west Amman, Jordan by hydrochloric acid under continuous stirring for 4 h at room temperature was performed and nano kaolinite powder was used as an adsorbent for the removal of Cu(II), Zn(II) and Ni(II) ions. Nano kaolinite was characterized by XRD, FT-IR and SEM techniques. Effect of pH, adsorbent dose, initial metal ion concentration, contact time and temperature on adsorption process was examined. The negative values of ΔGo and the positive value of ΔHo revealed that the adsorption process was spontaneous and endothermic. The Langmuir isotherm model fitted well to metal ions adsorption data and the adsorption capacity. The kinetic data provided the best correlation of the adsorption with pseudo-second order kinetic model. In view of promising efficiency, the nano kaolinite can be employed for heavy metal ions adsorption.

scholarly journals Adsorption of Co(II) from aqueous solution using municipal sludge biochar modified by HNO3

2021 ◽  
Author(s):  
Chunlian Hu ◽  
Wei Zhang ◽  
Yuantao Chen ◽  
Na Ye ◽  
DaWa YangJi ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Order Kinetic ◽  
Adsorption Effect ◽  
Surface Areas ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Adsorption Of Co

Abstract Herein adsorption studies were proposed on a carboxylated sludge biochar (CSB) material modified by HNO3 to assess its capacity in the removal of cobalt from aqueous solution. The as-prepared sludge biochar material were characterized by Brunaure-Emmett-Teller (BET), Fourier transform infrared (FT-IR), Thermogravimetric analysis (TGA), Energy-dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The isotherm process could be well described by Langmuir isotherm model. The adsorption kinetics indicated that cobalt adsorption followed pseudo-second-order kinetic model. The mechanism between Co(II) and biochar involved electrostatic interaction, ion exchange, surface complexation and physical function. The adsorption capacity on CSB was as high as 72.27 mg·g−1, surpassing original sludge biochar (SB). This is due to the fact that CSB had abundant oxygen-containing functional groups and many hydroxyls, as well as, the BET surface areas increased when SB was modified by HNO3, which stimulate adsorption effect. Therefore, this work shows that CSB could be used as an efficient adsorbent to remove Co(II) in the wastewater.

scholarly journals Organobentonite: Characterization and adsorptive properties towards phenol and its derivatives

2016 ◽  
Vol 48 (2) ◽  
pp. 167-176
Author(s):  
Sanja Marinovic ◽  
Marija Ajdukovic ◽  
Natasa Jovic-Jovicic ◽  
Predrag Bankovic ◽  
Zorica Mojovic ◽  
...  
Keyword(s):  
Point Of Zero Charge ◽  
Hexadecyltrimethylammonium Bromide ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Phenol Derivatives ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Nitro Derivatives

Bentonite from Mecji Do locality in Serbia was modified with hexadecyltrimethylammonium bromide (HDTMA-Br), and the sample was denoted as HDTMA-MD. The characterization of the material included X-Ray diffraction, elemental analysis and point of zero charge determination. The adsorption of phenol and its nitro derivatives: 2-nitrophenol (2NP), 3-nitrophenol (3NP) and 4-nitrophenol (4NP) on HDTMA-MD was investigated. The adsorption capacity of HDTMA-MD toward phenol derivatives increased in the following order qe (phenol) < qe (3NP) < qe (2NP) < qe (4NP). The influence of adsorption time and initial concentration on the adsorption efficiency of HDTMA-MD was studied for 4NP. The data were best fitted with Langmuir isotherm model and the pseudo-second-order kinetic model.

Modification of waste coal gangue and its application in the removal of Mn2+ from aqueous solution

2016 ◽  
Vol 74 (2) ◽  
pp. 524-534 ◽  
Author(s):  
Ruifang Qiu ◽  
Fangqin Cheng
Keyword(s):  
Aqueous Solution ◽  
Absorption Capacity ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Calcination Method ◽  
Adsorbent Capacity

We developed a new calcination method to convert coal gangue (CG), a common waste generated from coal production process, into a modified form, which could be used as an adsorbent to remove Mn2+ from aqueous solution. Sodium tetraborate (Na2B4O7·10H2O) was added into the CG calcination process as an additive, and the concentrations of Na2B4O7·10H2O were optimized along with the calcination temperature to obtain the best adsorbent capacity of modified coal gangue (MCG). We applied multiple analytical methods such as scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and Brunauer–Emmett–Teller analysis to characterize the MCG. The results showed it had a smaller particle size and a larger specific surface area and pore volume after modification. It also indicated that the phase of CG transformed from kaolinite to metakaolinite after calcination. Moreover, a new substance was generated with two new peaks at 1,632 cm−1 and 799 cm−1. The Mn2+ absorption capacity of MCG was evaluated using a series of experiments with different adsorbent doses, pH values and initial Mn2+ concentrations during the adsorption process. We found that Mn2+ adsorbent capacity of MCG increased by more than seven-fold compared to that of CG. The Langmuir isotherm model and the pseudo-second-order kinetic model provided the best fit to the adsorption processes.

Synthesis of Functionalized Magnetite Titanium Dioxide Nanocomposite for Removal of Acid Fuchsine Dye

2018 ◽  
Vol 21 (8) ◽  
pp. 583-593 ◽  
Author(s):  
Sara Rahnama ◽  
Shahab Shariati ◽  
Faten Divsar
Keyword(s):  
Titanium Dioxide ◽  
Removal Efficiency ◽  
Magnetic Core ◽  
Fractional Factorial ◽  
Order Kinetic ◽  
Sorption Data ◽  
Salt Addition ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Objective: In this research, a novel magnetite titanium dioxide nanocomposite functionalized by amine groups (Fe3O4@SiO2@TiO2-NH2) was synthesized and its ability for efficient removal of Acid Fuchsine as an anionic dye from aqueous solutions was investigated. Method: The core-shell structure of Fe3O4@SiO2@TiO2 was prepared using Fe3O4 as magnetic core, tetra ethyl orthosilicate as silica and tetra butyl titanate as titanium source for shell. The synthesized nanocomposites (particle size lower than 44 nm) were characterized by FT-IR, XRD, DRS, SEM and TGA instruments. The various experimental parameters affecting dye removal efficiency were investigated and optimized using Taguchi fractional factorial design. Results: The synthesized adsorbent showed the highest removal efficiency of Acid Fuchsine (99 %) at pH= 3.5, without salt addition and during stirring at contact times less than 10 minutes. The study of kinetic models at two concentration levels showed the fast dye sorption on the surface of proposed nanocomposites with pseudo second order kinetic model (R2=1). Also, the fitting of Acid Fuchsine sorption data to Freundlich, Langmuir and Temkin isotherms suggested that Freundlich model gave a better fitting than other models (R2=0.9936, n=2). Conclusion: Good chemical stability, excellent magnetic properties, very fast adsorption kinetics and high removal efficiency make the synthesized nanocomposite as a proper recoverable sorbent for removal of Acid Fuchsine dye from wastewaters.

Nano-ZrO2/TiO2 Impregnated Orange Wood Sawdust and Peach Stone Shell Adsorbents for Cr (VI) Removal

2020 ◽  
Vol 16 (7) ◽  
pp. 880-892
Author(s):  
Şerife Parlayıcı ◽  
Kübra Tuna Sezer ◽  
Erol Pehlivan
Keyword(s):  
Contact Time ◽  
Ph Value ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Wood Sawdust ◽  
Adsorption Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Equilibrium Status

Background: In this work, Cr (VI) adsorption on nano-ZrO2๏TiO2 impregnated orange wood sawdust (Zr๏Ti/OWS) and nano-ZrO2๏TiO2 impregnated peach stone shell (Zr๏Ti/PSS) was investigated by applying different adsorption parameters such as Cr (VI) concentrations, contact time, adsorbent dose, and pH for all adsorbents. Methods: The adsorbents were characterized by SEM and FT-IR. The equilibrium status was achieved after 120 min of contact time and optimum pH value around 2 were determined for Cr (VI) adsorption. Adsorption data in the equilibrium is well-assembled by the Langmuir model during the adsorption process. Results: Langmuir isotherm model showed a maximum adsorption value of OWS: 21.65 mg/g and Zr๏Ti/OWS: 27.25 mg/g. The same isotherm displayed a maximum adsorption value of PSS: 17.64 mg/g, and Zr๏Ti/PSS: 31.15 mg/g. Pseudo-second-order kinetic models (R2=0.99) were found to be the best models for describing the Cr (VI) adsorption reactions. Conclusıon: Thermodynamic parameters such as changes in ΔG°, ΔH°, and ΔS° have been estimated, and the process was found to be spontaneous.

REMOVAL OF STRONTIUM (II) FROM AQUEOUS SOLUTION USING FUNCTIONALIZED CARBON NANOTUBES

2012 ◽  
Vol 11 (02) ◽  
pp. 1250019 ◽  
Author(s):  
RAJESH KUMAR ◽  
S. K. JAIN
Keyword(s):  
Carbon Nanotubes ◽  
Polluted Water ◽  
Order Kinetic ◽  
Environmental Application ◽  
Functionalized Carbon Nanotubes ◽  
Multi Wall Carbon Nanotubes ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

This study was carried out to evaluate the environmental application of functionalized carbon nanotubes through the experimental removal of strontium (II) from water. The aim was to find the optimal condition for the removal of strontium from water under different conditions such as initial concentration of strontium, contact time and neutral pH. The functionalized multi wall carbon nanotubes (f-MWCNT) were characterized by FT-IR and scanning electron microscopy (SEM). The adsorption isotherms were correlated to Freundlich and Langmuir models and it was found that the adsorption data could be fitted better by Langmuir model than Freundlich one. The kinetic data shows that the adsorption describes well with the pseudo-second order kinetic model. Functionalized MWCNT can be used as good adsorbent for the removal of the strontium ions from polluted water according to results.

Adsorption of Zn(II) from Aqueous Solutions by Thiol-Functionalized MCM-48

2011 ◽  
Vol 413 ◽  
pp. 148-153 ◽  
Author(s):  
Xue Na Hu ◽  
Ya Han ◽  
Jia Yan Li ◽  
Jun Yan Wu ◽  
Jian Rong Chen ◽  
...  
Keyword(s):  
Ethylene Oxide ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Pluronic P123 ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ethylene Oxide ◽  
Ft Ir ◽  
Poly Ethylene ◽  
Poly Propylene

Thiol-functionalized MCM-48 (SH-MCM-48) was synthesized by co-condensation method, with co-templates of cetyltrimethylammonium bromide (CTAB) and nonionic poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) triblock copolymer (Pluronic P123). The resulting material was characterized by XRD and FT-IR spectrum. The potential of SH-MCM-48 for adsorption Zn (II) from aqueous solution was examined. Batch adsorption studies were carried out to investigate the effect of experimental parameters including pH, metal ions concentration and adsorption time. The maximum adsorption capacities of Zn (II) onto SH-MCM-48 were 30.12, 34.01 and 38.02 mg g-1 at the temperature of 303, 313 and 323K, respectively. The adsorption kinetics data were found to follow the pseudo-second-order kinetic model, and adsorption isotherms were fitted well with Langmuir and Freundlich models. Moreover, the adsorption thermodynamic parameters (△G0, △H0 and △S0) were measured, and indicated that the adsorption was an exothermic and spontaneous process.

scholarly journals Fenton-Like Oxidation of Antibiotic Ornidazole Using Biochar-Supported Nanoscale Zero-Valent Iron as Heterogeneous Hydrogen Peroxide Activator

2020 ◽  
Vol 17 (4) ◽  
pp. 1324 ◽  
Author(s):  
Yanchang Zhang ◽  
Lin Zhao ◽  
Yongkui Yang ◽  
Peizhe Sun
Keyword(s):  
Oxidation Process ◽  
Zero Valent Iron ◽  
Order Kinetic ◽  
Mass Ratio ◽  
Promising Alternative ◽  
Nanoscale Zero Valent Iron ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
H2o2 System

Biochar (BC)-supported nanoscale zero-valent iron (nZVI-BC) was investigated as a heterogeneous Fenton-like activator to degrade the antibiotic ornidazole (ONZ). The characterization of nZVI-BC indicated that BC could enhance the adsorption of ONZ and reduce the aggregation of nZVI. Thus, nZVI-BC had a higher removal efficiency (80.1%) than nZVI and BC. The effects of parameters such as the nZVI/BC mass ratio, pH, H2O2 concentration, nZVI-BC dose, and temperature were systematically investigated, and the removal of ONZ followed a pseudo-second-order kinetic model. Finally, possible pathways of ONZ in the oxidation process were proposed. The removal mechanism included the adsorption of ONZ onto the surface of nZVI-BC, the generation of •OH by the reaction of nZVI with H2O2, and the oxidation of ONZ. Recycling experiments indicated that the nZVI-BC/H2O2 system is a promising alternative for the treatment of wastewater containing ONZ.

Sign in / Sign up

Export Citation Format

Share Document