Modification of waste coal gangue and its application in the removal of Mn2+ from aqueous solution

2016 ◽  
Vol 74 (2) ◽  
pp. 524-534 ◽  
Author(s):  
Ruifang Qiu ◽  
Fangqin Cheng
Keyword(s):  
Aqueous Solution ◽  
Absorption Capacity ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Calcination Method ◽  
Adsorbent Capacity

We developed a new calcination method to convert coal gangue (CG), a common waste generated from coal production process, into a modified form, which could be used as an adsorbent to remove Mn2+ from aqueous solution. Sodium tetraborate (Na2B4O7·10H2O) was added into the CG calcination process as an additive, and the concentrations of Na2B4O7·10H2O were optimized along with the calcination temperature to obtain the best adsorbent capacity of modified coal gangue (MCG). We applied multiple analytical methods such as scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and Brunauer–Emmett–Teller analysis to characterize the MCG. The results showed it had a smaller particle size and a larger specific surface area and pore volume after modification. It also indicated that the phase of CG transformed from kaolinite to metakaolinite after calcination. Moreover, a new substance was generated with two new peaks at 1,632 cm−1 and 799 cm−1. The Mn2+ absorption capacity of MCG was evaluated using a series of experiments with different adsorbent doses, pH values and initial Mn2+ concentrations during the adsorption process. We found that Mn2+ adsorbent capacity of MCG increased by more than seven-fold compared to that of CG. The Langmuir isotherm model and the pseudo-second-order kinetic model provided the best fit to the adsorption processes.

Fast Removal of Pb2+ from Aqueous Solution by Water Insoluble Konjac Glucomannan

2009 ◽  
Vol 610-613 ◽  
pp. 65-68 ◽  
Author(s):  
Xue Gang Luo ◽  
Feng Liu ◽  
Xiao Yan Lin
Keyword(s):  
Aqueous Solution ◽  
Correlation Coefficients ◽  
Konjac Glucomannan ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Equilibrium Process ◽  
Fast Removal

Konjac glucomannan (KGM) was converted into water insoluble konjac glucomannan (WIKGM) by treating with NaOH through completely deacetylated reaction. Adsorption study was carried out for the adsorption of Pb2+ from aqueous solution using water insoluble konjac glucomannan. The influences of pH, contact time, temperature and initial Pb2+ concentration on the absorbent were studied. Results of kinetic data showed that the Pb2+ adsorption rate was fast and good correlation coefficients were obtained for the pseudo second-order kinetic model. The equilibrium process was described well by the Langmuir isotherm model with maximum adsorption capacity of 9.18 mg/g on WIKGM at 25°C.

scholarly journals Synthesis of Large Pore LTL and MOR Zeolites and Use as Adsorbent for The Removal of Heavy Metal and Radioactive Metal Ions in Aqueous Solution

2021 ◽  
Author(s):  
Duy Hoai-Phuong Nguyen ◽  
Quang Thanh Le ◽  
Tung Cao Thanh Pham ◽  
Thanh Tu Le
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Order Kinetic ◽  
Experiment Data ◽  
Large Pore ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract Heavy metal and radioactive ions can cause serious environmental problems if they are not completely removed from wastewater as well as in groundwater. In this study, large pore LTL and MOR zeolites were successfully synthesized and used as adsorbent to remove Pb2+, Cu2+, Zn2+, Cd2+, Cs+ and Sr2+ ions in aqueous solution. At low initial concentration (10 ppm), LTL and MOR zeolites effectively removed above metal ions with removal efficiency in the range of 95–99%. Both zeolites showed high affinity to Cs+ and Pb2+ ions with the adsorption capacity of LTL zeolite to Cs+ and Pb2+ were 278.8 mg/g and 141.4 mg/g, and that of MOR zeolite were 238.8 mg/g and 178.9 mg/g, respectively. The EDS results showed that Pb2+ ions from the aqueous solution were exchanged with exchangeable Na+ ions in MOR zeolite and K+ ions in LTL zeolite. The pseudo-second-order kinetic model and Langmuir isotherm model fitted better to experiment data on the adsorption of metal ions on both LTL and MOR zeolite. This result revealed that the adsorption of these metal ions on LTL and MOR zeolite was monolayer chemisorption. The equilibrium adsorption results showed that the microstructure of zeolite significantly affected the adsorption capacity of LTL and MOR zeolite on removal of tested metal ions.

scholarly journals Adsorption of Co(II) from aqueous solution using municipal sludge biochar modified by HNO3

2021 ◽  
Author(s):  
Chunlian Hu ◽  
Wei Zhang ◽  
Yuantao Chen ◽  
Na Ye ◽  
DaWa YangJi ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Order Kinetic ◽  
Adsorption Effect ◽  
Surface Areas ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Adsorption Of Co

Abstract Herein adsorption studies were proposed on a carboxylated sludge biochar (CSB) material modified by HNO3 to assess its capacity in the removal of cobalt from aqueous solution. The as-prepared sludge biochar material were characterized by Brunaure-Emmett-Teller (BET), Fourier transform infrared (FT-IR), Thermogravimetric analysis (TGA), Energy-dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The isotherm process could be well described by Langmuir isotherm model. The adsorption kinetics indicated that cobalt adsorption followed pseudo-second-order kinetic model. The mechanism between Co(II) and biochar involved electrostatic interaction, ion exchange, surface complexation and physical function. The adsorption capacity on CSB was as high as 72.27 mg·g−1, surpassing original sludge biochar (SB). This is due to the fact that CSB had abundant oxygen-containing functional groups and many hydroxyls, as well as, the BET surface areas increased when SB was modified by HNO3, which stimulate adsorption effect. Therefore, this work shows that CSB could be used as an efficient adsorbent to remove Co(II) in the wastewater.

scholarly journals Adsorption of Lead(II) Ions from Aqueous Solution onto Lignin

2009 ◽  
Vol 27 (4) ◽  
pp. 435-445 ◽  
Author(s):  
Laura Bulgariu ◽  
Dumitru Bulgariu ◽  
Theodor Malutan ◽  
Matei Macoveanu
Keyword(s):  
Aqueous Solution ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Solution Ph ◽  
Batch System ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The adsorption of lead(II) ions from aqueous solution onto lignin was investigated in this study. Thus, the influence of the initial solution pH, the lignin dosage, the initial Pb(II) ion concentration and the contact time were investigated at room temperature (19 ± 0.5 °C) in a batch system. Adsorption equilibrium was approached within 30 min. The adsorption kinetic data could be well described by the pseudo-second-order kinetic model, while the equilibrium data were well fitted using the Langmuir isotherm model. A maximum adsorption capacity of 32.36 mg/g was observed. The results of this study indicate that lignin has the potential to become an effective and economical adsorbent for the removal of Pb(II) ions from industrial wastewaters.

scholarly journals Novel Ag/Kaolin Nanocomposite as Adsorbent for Removal of Acid Cyanine 5R from Aqueous Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Saeedeh Hashemian ◽  
Mohammad Reza Shahedi
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Process ◽  
Alkaline Condition ◽  
Order Kinetic ◽  
Nano Composite ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Ag/kaolin nanocomposite was prepared by reduction of Ag+ion with ethanol at alkaline condition on kaolin surface. Nanocomposite was characterized by FTIR, XRD, TEM, and BET methods. Results showed the Ag/kaolin composite has particle size 50 nm. The surface area was increased from kaolin to Ag/kaolin from 1.0215 to 7.409 m2 g−1, respectively. Ag/kaolin nanocomposite was used for adsorption of acid cyanine 5R (AC5R) from aqueous solution. The effect of parameters such as contact time, pH, and mass of nano composite has been investigated. The maximum percentage of adsorption of AC5R was found at pH 3 and contact time of 60 min. The higher percentage removal of AC5R by Ag/kaolin than kaolin can be attributed to catalytic activity of Ag on the surface of kaolin. The experimental data was fitted by pseudo-second-order kinetic model. The adsorption isotherm data could be well interpreted by Langmuir isotherm model. From the results of thermodynamic study, the adsorption process of AC5R onto Ag/kaolin nanocomposite was spontaneous and endothermic process. The process is clean and safe for purifying of water pollution.

scholarly journals Biosorption of Remazol Brilliant Blue R Dye onto Chemically Modified and Unmodified Yarrowia lipolytica Biomass

2021 ◽  
Author(s):  
YUSUF DORUK ARACAGÖK
Keyword(s):  
Aqueous Solution ◽  
Yarrowia Lipolytica ◽  
Brilliant Blue ◽  
Order Kinetic ◽  
Biosorption Capacity ◽  
Chemically Modified ◽  
Remazol Brilliant Blue R ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract Remazol Brilliant Blue R (RBBR) is a widely used carcinogenic and toxic dye. This study focused on RBBR dye from aqueous solution using potassium permanganate, cetyltrimethylammonium bromide (CTAB) modified, and unmodified Yarrowia lipolytica biomass as biosorbent. RBBR dye biosorption studies were carried out as a function of pH, initial dye concentration, biosorbent dose, contact time, and temperature. The pH of the aqueous solution strongly influenced the biosorption percent of RBBR dye. The highest dye biosorption capacity yield was obtained at pH 2-3 as well as above pH 3, very low yield biosorption of RBBR was observed. No differences were found between chemically modified and unmodified biomass in terms of RBBR dye biosorption capacity. In the first 15 min, almost 50% RBBR dye was removed from the solution and reached equilibrium within,180 min at pH 2. Biosorption isotherm obeyed Langmuir isotherm model and pseudo-second-order kinetic model.

Preparation of novel porous Al2O3-SiO2 nanocomposites via solution-freeze-drying-calcination method for the efficient removal of uranium in solution

2021 ◽  
Author(s):  
Maoling Wu ◽  
Ling Ding ◽  
Jun Liao ◽  
Yong Zhang ◽  
Wenkun Zhu
Keyword(s):  
Adsorption Process ◽  
Interaction Mechanism ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Calcination Method ◽  
Adsorption Desorption

Abstract In this work, the efficient extraction of uranium in solution using Al2O3-SiO2-T was reported. Kinetics and isotherm models indicated that the removal process of uranium onAl2O3-SiO2-T accorded with pseudo-second-order kinetic model and Langmuir isotherm model, which showed that the adsorption process was a uniform mono-layer chemical behavior. The maximum adsorption capacity of Al2O3-SiO2-T reached 738.7 mg g-1, which was higher than AlNaO6Si2 (349.8 mg g-1) and Al2O3-SiO2-NT (453.1 mg g-1), indicating that the addition of template could effectively improve the adsorption performance of Al2O3-SiO2 to uranium. Even after five cycles of adsorption-desorption, the removal percentage of uranium on Al2O3-SiO2-T remained 96%. Besides, the extraction efficiency of uranium on Al2O3-SiO2-T was 72.5% in simulated seawater, which suggested that the Al2O3-SiO2-T was expected to be used for uranium extraction from seawater. Further, the interaction mechanism between Al2O3-SiO2-T and uranium species was studied. The results showed that the electrostatic interaction and complexation played key roles in the adsorption process of Al2O3-SiO2-T to uranium.

The Study of the Modified Grain Sorghum Stalk to Remove Methylene Blue Dye from Aqueous Solution

2012 ◽  
Vol 430-432 ◽  
pp. 197-201
Author(s):  
Feng Yu Li ◽  
Sheng Hua Zhang ◽  
Jin Yi Chen
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Grain Sorghum ◽  
Blue Dye ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Effects Of Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Pyromellitic dianhydride(PMDA）- modified grain sorghum stalk was used as a novel low-cost adsorbent to remove cationic dye methylene blue(MB) from aqueous solution. Bath studies were carried out to investigate the effects of pH and retention time on the adsorption of MB. The adsorption process could obtain >98% removal percentage within 30 minutes as the MB concentration was at 200 and 300 mg/L. And for 400 mg/L MB, 99% was removed in 6 hrs. The kinetics study showed that the adsorption processes followed the pseudo-second-order kinetic model, which confirming that the sorption rate is controlled by chemical adsorption. Equilibrium isotherms were analyzed by the Langmuir and Freundlich models. Langmuir model can be fitted better than Freundlich with maximum monolayer adsorption capacity of 568.18 mg/g for MB.

Adsorption of enrofloxacin from aqueous solution by bentonite

Clay Minerals ◽  
2013 ◽  
Vol 48 (4) ◽  
pp. 627-637 ◽  
Author(s):  
J. X. Zhang ◽  
Q. X. Zhou ◽  
W. Li
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Equilibrium ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Freundlich Model ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Better Than

AbstractThe removal of enrofloxacin, a fluoroquinolone antibiotic, from aqueous solution by adsorption onto bentonite was investigated in this study. The effects of initial concentrations, contact time and temperature on the adsorption of enrofloxacin were studied via batch experiments. The adsorption equilibrium was achieved within 60 min for all studied concentrations. The adsorption capacity increased with the increase of initial concentration within a concentration range. Higher temperatures were favourable for the adsorption. The change of Gibbs free energy (ΔG°), change of enthalpy (ΔH°) and change of entropy (ΔS°) were evaluated and the results indicate that the adsorption should be an endothermic and spontaneous process. The Langmuir isotherm model fitted to the experimental data better than the Freundlich model. The adsorption follows the pseudo-second order kinetic model.

scholarly journals Preparation of MWCNTS/Cr2O3-NiO Nanocomposite for Adsorption and Photocatalytic Removal of Bismarck Brown G Dye from Aqueous Solution

2020 ◽  
Vol 20 (3) ◽  
pp. 554
Author(s):  
Emman Jassim Mohammad ◽  
Mohanad Mousa Kareem ◽  
Abbas Jasim Atiyah Lafta
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Multiwall Carbon Nanotubes ◽  
Effect Of Temperature ◽  
Order Kinetic ◽  
Force Microscopy ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Photocatalytic Reactions

This work describes the synthesis of nanocomposites of multiwall carbon nanotubes (MWCNTs) with co-oxide nanocomposite (MWCNTs)/MO. These nanocomposites were prepared using a simple evaporation and drying process. The obtained composites were characterized using X-ray diffraction (XRD), Atomic force microscopy (AFM), Fourier Transform Infrared Spectroscopy (FTIR), and scanning electron microscopy (SEM). The activity of the prepared composites was investigated by following the removal of Bismarck brown G dye (BBG) from aqueous solution via adsorption processes and photocatalytic reactions. Different reaction parameters were performed such as the effect of dosage of the used nanocomposite, pH value, and effect of temperature. In addition to that adsorption isotherms and reaction kinetics were investigated. The efficiency of photocatalytic dye removal over the prepared composites was 99.9% after one hour of reaction at the optimal conditions which were mass dosage (0.03 g), pH (5), and temperature (303 K). The adsorption isotherm data were fitted with Langmuir isotherm and the kinetic data were fitted with the pseudo-second-order kinetic model.

Sign in / Sign up

Export Citation Format

Share Document