scholarly journals Evaluation of Development Level and Technical Contribution of Recent Technologies Adopted to Meet the Challenges of 5G Wireless Cellular Networks

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 635
Author(s):  
Saleh Albadran

The evolution of the global wireless market is accompanied by an increased need in terms of speed and number of users, lower latency, better coverage, better spectral efficiency and quality of service, etc. To meet these needs, 5G has recently been introduced as an effective solution which targets, via the large scale deployment of symmetric antennas, a wide variety of sectors such as energy, health, media, industry, transport and especially wireless cellular networks which are among the most important pillars of modern societies. Multiple Input, Multiple Output (MIMO) systems, which have been extended to “Massive MIMO” mode and which consist of increasing the number of radiating elements involved in the transmission and reception of the radio link, are a very promising solution for improving the spectral efficiency of wireless communication systems (WCSs). Motivated by the aforementioned developments, the present paper investigates the increased capacity of MIMO systems to improve transmission in WCSs using 5G. It carefully focuses on the evaluation of the development level and technical contribution of MIMO systems and millimeter wave (mmWave) bands in 5G wireless cellular networks (WCNs) and gives important recommendations.

Entropy ◽  
2020 ◽  
Vol 22 (11) ◽  
pp. 1245
Author(s):  
Maoke Miao ◽  
Xiaofeng Li

This paper studies the Gallager’s exponent for coherent multiple-input multiple-output (MIMO) free space optical (FSO) communication systems over gamma–gamma turbulence channels. We assume that the perfect channel state information (CSI) is known at the receiver, while the transmitter has no CSI and equal power is allocated to all of the transmit apertures. Through the use of Hadamard inequality, the upper bound of the random coding exponent, the ergodic capacity and the expurgated exponent are derived over gamma–gamma fading channels. In the high signal-to-noise ratio (SNR) regime, simpler closed-form upper bound expressions are presented to obtain further insights into the effects of the system parameters. In particular, we found that the effects of small and large-scale fading are decoupled for the ergodic capacity upper bound in the high SNR regime. Finally, a detailed analysis of Gallager’s exponents for space-time block code (STBC) MIMO systems is discussed. Monte Carlo simulation results are provided to verify the tightness of the proposed bounds.


Author(s):  
Xiao Chen ◽  
Zaichen Zhang ◽  
Liang Wu ◽  
Jian Dang

Abstract In this journal, we investigate the beam-domain channel estimation and power allocation in hybrid architecture massive multiple-input and multiple-output (MIMO) communication systems. First, we propose a low-complexity channel estimation method, which utilizes the beam steering vectors achieved from the direction-of-arrival (DOA) estimation and beam gains estimated by low-overhead pilots. Based on the estimated beam information, a purely analog precoding strategy is also designed. Then, the optimal power allocation among multiple beams is derived to maximize spectral efficiency. Finally, simulation results show that the proposed schemes can achieve high channel estimation accuracy and spectral efficiency.


Author(s):  
Rong Ran ◽  
Hayoung Oh

AbstractSparse-aware (SA) detectors have attracted a lot attention due to its significant performance and low-complexity, in particular for large-scale multiple-input multiple-output (MIMO) systems. Similar to the conventional multiuser detectors, the nonlinear or compressive sensing based SA detectors provide the better performance but are not appropriate for the overdetermined multiuser MIMO systems in sense of power and time consumption. The linear SA detector provides a more elegant tradeoff between performance and complexity compared to the nonlinear ones. However, the major limitation of the linear SA detector is that, as the zero-forcing or minimum mean square error detector, it was derived by relaxing the finite-alphabet constraints, and therefore its performance is still sub-optimal. In this paper, we propose a novel SA detector, named single-dimensional search-based SA (SDSB-SA) detector, for overdetermined uplink MIMO systems. The proposed SDSB-SA detector adheres to the finite-alphabet constraints so that it outperforms the conventional linear SA detector, in particular, in high SNR regime. Meanwhile, the proposed detector follows a single-dimensional search manner, so it has a very low computational complexity which is feasible for light-ware Internet of Thing devices for ultra-reliable low-latency communication. Numerical results show that the the proposed SDSB-SA detector provides a relatively better tradeoff between the performance and complexity compared with several existing detectors.


Author(s):  
В.Б. КРЕЙНДЕЛИН ◽  
М.В. ГОЛУБЕВ

Совместный с прекодингом автовыбор антенн на приемной и передающей стороне - одно из перспективных направлений исследований для реализации технологий Multiple Transmission and Reception Points (Multi-TRP, множество точек передачи и приема) в системах со многими передающими и приемными антеннами Massive MIMO (Multiple-Input-Multiple-Output), которые активно развиваются в стандарте 5G. Проанализированы законодательные ограничения, влияющие на применимость технологий Massive MIMO, и специфика реализации разрабатываемого алгоритма в миллиметровомдиапа -зоне длин волн. Рассмотрены алгоритмы формирования матриц автовыбора антенн как на передающей, так и на приемной стороне. Сформулирована строгая математическая постановка задачи для двух критериев работы алгоритма: максимизация взаимной информации и минимизация среднеквадратичной ошибки. Joint precoding and antenna selection both on transmitter and receiver sides is one of the promising research areas for evolving toward the Multiple Transmission and Reception Points (Multi-TRP) concept in Massive MIMO systems. This technology is under active development in the coming 5G 3GPP releases. We analyze legal restrictions for the implementation of 5G Massive MIMO technologies in Russia and the specifics of the implementation of the developed algorithm in the millimeter wavelength range. Algorithms of antenna auto-selection matrices formation on both transmitting and receiving sides are considered. Two criteria are used for joint antenna selection and precoding: maximizing mutual information and minimizing mean square error.


2022 ◽  
Author(s):  
Chen Wei ◽  
Kui Xu ◽  
Zhexian Shen ◽  
Xiaochen Xia ◽  
Wei Xie ◽  
...  

Abstract In this paper, we investigate the uplink transmission for user-centric cell-free massive multiple-input multiple-output (MIMO) systems. The largest-large-scale-fading-based access point (AP) selection method is adopted to achieve a user-centric operation. Under this user-centric framework, we propose a novel inter-cluster interference-based (IC-IB) pilot assignment scheme to alleviate pilot contamination. Considering the local characteristics of channel estimates and statistics, we propose a location-aided distributed uplink combining scheme based on a novel proposed metric representing inter-user interference to balance the relationship among the spectral efficiency (SE), user equipment (UE) fairness and complexity, in which the normalized local partial minimum mean-squared error (LP-MMSE) combining is adopted for some APs, while the normalized maximum ratio (MR) combining is adopted for the remaining APs. A new closed-form SE expression using the normalized MR combining is derived and a novel metric to indicate the UE fairness is also proposed. Moreover, the max-min fairness (MMF) power control algorithm is utilized to further ensure uniformly good service to the UEs. Simulation results demonstrate that the channel estimation accuracy of our proposed IC-IB pilot assignment scheme outperforms that of the conventional pilot assignment schemes. Furthermore, although the proposed location-aided uplink combining scheme is not always the best in terms of the per-UE SE, it can provide the more fairness among UEs and can achieve a good trade-off between the average SE and computational complexity.


Author(s):  
Krzysztof Bronk ◽  
Adam Lipka ◽  
Rafał Niski

The article introduces a method of performing a radio link quality assessment based on the Link Quality Indicator (LQI) which will be calculated for every system that is available. The method presented has been developed during the netBaltic project completed in Poland and generally applies to the so-called maritime zone A, i.e. the sea area where ships are still within the range of shore-based radio communication systems, particularly 3G/LTE cellular networks. The algorithm was developed based on the results of measurements obtained during two separate campaigns. That measurement data served as a basis for the method’s initial assumptions and was utilized during the method’s verification.


Electronics ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1844
Author(s):  
Minhoe Kim ◽  
Woongsup Lee ◽  
Dong-Ho Cho

In this paper, we investigate a deep learning based resource allocation scheme for massive multiple-input-multiple-output (MIMO) communication systems, where a base station (BS) with a large scale antenna array communicates with a user equipment (UE) using beamforming. In particular, we propose Deep Scanning, in which a near-optimal beamforming vector can be found based on deep Q-learning. Through simulations, we confirm that the optimal beam vector can be found with a high probability. We also show that the complexity required to find the optimum beam vector can be reduced significantly in comparison with conventional beam search schemes.


Information ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 165 ◽  
Author(s):  
Xiaoqing Zhao ◽  
Zhengquan Li ◽  
Song Xing ◽  
Yang Liu ◽  
Qiong Wu ◽  
...  

Massive multiple-input-multiple-output (MIMO) is one of the key technologies in the fifth generation (5G) cellular communication systems. For uplink massive MIMO systems, the typical linear detection such as minimum mean square error (MMSE) presents a near-optimal performance. Due to the required direct matrix inverse, however, the MMSE detection algorithm becomes computationally very expensive, especially when the number of users is large. For achieving the high detection accuracy as well as reducing the computational complexity in massive MIMO systems, we propose an improved Jacobi iterative algorithm by accelerating the convergence rate in the signal detection process.Specifically, the steepest descent (SD) method is utilized to achieve an efficient searching direction. Then, the whole-correction method is applied to update the iterative process. As the result, the fast convergence and the low computationally complexity of the proposed Jacobi-based algorithm are obtained and proved. Simulation results also demonstrate that the proposed algorithm performs better than the conventional algorithms in terms of the bit error rate (BER) and achieves a near-optimal detection accuracy as the typical MMSE detector, but utilizing a small number of iterations.


2018 ◽  
Vol 39 (2) ◽  
pp. 107
Author(s):  
Victor Croisfelt Rodrigues ◽  
Taufik Abrão

The demand for higher data rates can be satisfied by the spectral efficiency (SE) improvement offered by Massive multiple-input multiple-output (M-MIMO) systems. However, the pilot contamination remains as a fundamental issue to obtain the paramount SE in such systems. This propitiated the research of several methods to mitigate pilot contamination. One of these procedures is based on the coordination of the cells, culminating in proposals with multiple pilot training phases. This paper aims to expand the results of the original paper, whereby the concepts of large pilot training phases were offered. The evaluation of such method was conducted through more comprehensible numerical results, in which a large number of antennas were assumed and more rigorous SE expressions were used. The channel estimation approaches relying on multiple pilot training phases were considered cumbersome for implementation and an uninteresting solution to overcome pilot contamination; contradicting the results presented in the genuine paper.


Electronics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 1657
Author(s):  
Lu Sun ◽  
Bin Wu ◽  
Tianchun Ye

In this article, a low-complexity and high-throughput sorted QR decomposition (SQRD) for multiple-input multiple-output (MIMO) detectors is presented. To reduce the heavy hardware overhead of SQRD, we propose an efficient SQRD algorithm based on a novel modified real-value decomposition (RVD). Compared to the latest study, the proposed SQRD algorithm can save the computational complexity by more than 44.7% with similar bit error rate (BER) performance. Furthermore, a corresponding deeply pipelined hardware architecture implemented with the coordinate rotation digital computer (CORDIC)-based Givens rotation (GR) is designed. In the design, we propose a time-sharing Givens rotation structure utilizing CORDIC modules in idle state to share the concurrent GR operations of other CORDIC modules, which can further reduce hardware complexity and improve hardware efficiency. The proposed SQRD processor is implemented in SMIC 55-nm CMOS technology, which processes 62.5 M SQRD per second at a 250-MHz operating frequency with only 176.5 kilo-gates. Compared to related studies, the proposed design has the best normalized hardware efficiency and achieves a 6-Gbps MIMO data rate which can support current high-speed wireless communication systems such as IEEE 802.11ax.


Sign in / Sign up

Export Citation Format

Share Document