scholarly journals The Effects of Hot Blocks Geometry and Particle Migration on Heat Transfer and Entropy Generation of a Novel I-Shaped Porous Enclosure

2021 ◽  
Vol 13 (13) ◽  
pp. 7190
Author(s):  
Ramin Ghasemiasl ◽  
Maysam Molana ◽  
Taher Armaghani ◽  
Mohsen Saffari Pour
Keyword(s):  
Entropy Generation ◽  
Control Volume ◽  
Particle Migration ◽  
Al2o3 Nanoparticles ◽  
Governing Equations ◽  
Cooling Performance ◽  
Buongiorno’S Model ◽  
Finite Control ◽  
Predictive Correlation ◽  
Volume Method

This paper studied the cooling performance of a hot electronic chip using nanofluids (NF) mixed convection, implementing Buongiorno’s model of the NF simulation. The NF were assumed water-Al2O3 nanoparticles (NP) in the range of 0 to 4% of volume concentration. Six different problems of the combinations of three internal hot blocks, including triangular, square, and circular geometries, and two porous media, including sand and compact metallic powder, were numerically solved. To discretize the governing equations, a finite control volume method was applied. As most of the proposed correlations for the thermophysical properties of the NF were inaccurate, especially for thermal conductivity, a new predictive correlation was proposed using the multi-variable regression method with acceptable accuracy. It was found that the cooling performance improved with any increase in the NP loading. A higher nanoparticle concentration yielded better cooling characteristics, which was 11.93% for 4% volume. The sand porous medium also yielded a much higher value of the normalized Nusselt number (Nu) compared to the other medium. The entropy generation (EG) enhancement was maximum for the triangular hot block in a sand porous cavity.

scholarly journals A Framework and Numerical Solution of the Drying Process in Porous Media by Using a Continuous Model

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Hong Thai Vu ◽  
Evangelos Tsotsas
Keyword(s):  
Porous Media ◽  
Control Volume ◽  
Continuous Model ◽  
Control Volume Method ◽  
Drying Process ◽  
Transport Parameters ◽  
Governing Equations ◽  
Numerical Tools ◽  
Volume Method ◽  
The Continuum

The modelling and numerical simulation of the drying process in porous media are discussed in this work with the objective of presenting the drying problem as the system of governing equations, which is ready to be solved by many of the now widely available control-volume-based numerical tools. By reviewing the connection between the transport equations at the pore level and their up-scaled ones at the continuum level and then by transforming these equations into a format that can be solved by the control volume method, we would like to present an easy-to-use framework for studying the drying process in porous media. In order to take into account the microstructure of porous media in the format of pore-size distribution, the concept of bundle of capillaries is used to derive the needed transport parameters. Some numerical examples are presented to demonstrate the use of the presented formulas.

scholarly journals Mixed Convection and Entropy Generation of an Ag-Water Nanofluid in an Inclined L-Shaped Channel

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1150 ◽  
Author(s):  
Taher Armaghani ◽  
Muneer Ismael ◽  
Ali Chamkha ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Richardson Number ◽  
Volume Fraction ◽  
Governing Equations ◽  
Nanoparticles Volume Fraction ◽  
The Mean ◽  
The Right ◽  
Volume Method

This paper investigates the mixed convection and entropy generation of an Ag-water nanofluid in an L-shaped channel fixed at an inclination angle of 30° to the horizontal axis. An isothermal heat source was positioned in the middle of the right inclined wall of the channel while the other walls were kept adiabatic. The finite volume method was used for solving the problem’s governing equations. The numerical results were obtained for a range of pertinent parameters: Reynolds number, Richardson number, aspect ratio, and the nanoparticles volume fraction. These results were Re = 50–200; Ri = 0.1, 1, 10; AR = 0.5–0.8; and φ = 0.0–0.06, respectively. The results showed that both the Reynolds and the Richardson numbers enhanced the mean Nusselt number and minimized the rate of entropy generation. It was also found that when AR. increased, the mean Nusselt number was enhanced, and the rate of entropy generation decreased. The nanoparticles volume fraction was predicted to contribute to increasing both the mean Nusselt number and the rate of entropy generation.

Numerical Simulation of Fluid Flow and Heat Transfer in the Micro-Nozzle

2005 ◽  
Author(s):  
Longjian Li ◽  
Yihua Zhang ◽  
Wenzhi Cui ◽  
Tien-Chien Jen ◽  
Qinghua Chen ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Control Volume ◽  
Slip Model ◽  
Control Volume Method ◽  
Propulsion Performance ◽  
Micro Nozzle ◽  
Flow And Heat Transfer ◽  
Finite Control ◽  
Mems Technology ◽  
Volume Method

Micro-nozzle, based on the MEMS technology, has played an important role in orbit positioning, attitude adjusting and other applications of micro-satellites. The continuous no-slip model of two-dimensional compressible laminar flow in the micro-nozzle was proposed and solved numerically by finite control volume method. The flow and heat transfer in the micro-nozzle were computed under different conditions, including different inlet pressures, different inlet temperatures and different divergent angles. Flow field and effects of these conditions on the propulsion performance were analyzed. Finally, simulated solutions were compared and validated with the experimental results.

Numerical Simulation of Laminar Confined Impinging Jet in a Composite Channel

2008 ◽  
Author(s):  
Marcelo J. S. de Lemos
Keyword(s):  
Porous Layer ◽  
Control Volume ◽  
Numerical Technique ◽  
Simple Algorithm ◽  
Local Distribution ◽  
Governing Equations ◽  
Stagnation Region ◽  
Volume Method ◽  
Material Porosity ◽  
Macroscopic Equations

This work shows numerical results for a jet impinging onto a flat plane covered with a layer of a porous material. Porosity of the porous layer is varied in order to analyze its effect on the local distribution of Nu. Macroscopic equations for mass and momentum ae obtained based on the volume-average concept. The numerical technique employed for discretizing the governing equations was the control volume method with a boundary-fitted non-orthogonal coordinate system. The SIMPLE algorithm was used to handle the pressure-velocity coupling. Results indicate that inclusion of a porous layer decreases the peak in Nu avoiding excessive heating or cooling near the stagnation region.

scholarly journals Natural convection in a square cavity with partially active vertical walls: Time-periodic boundary condition

2006 ◽  
Vol 2006 ◽  
pp. 1-16 ◽  
Author(s):  
N. Nithyadevi ◽  
P. Kandaswamy ◽  
S. Sivasankaran
Keyword(s):  
Natural Convection ◽  
Numerical Study ◽  
Control Volume ◽  
Active Regions ◽  
Governing Equations ◽  
Square Cavity ◽  
Side Walls ◽  
Vertical Walls ◽  
Volume Method ◽  
Time Periodic

A numerical study of transient natural convection in a square cavity with partly thermally active side walls is introduced. The thermally active regions of the side walls are periodic in time. Top and bottom of the cavity are adiabatic. Nine different positions of the thermally active zones are considered. The governing equations are solved using control volume method with power-law scheme. The results are obtained for various values of amplitude, period, and Grashof numbers ranging from104–106and different thermally active situations. It is found that the average heat transfer increases by increasing amplitude forP=1,5, and decreasing forP=3. The average Nusselt number behaves nonlinearly as a function of period.

Sign in / Sign up

Export Citation Format

Share Document