scholarly journals Lignocellulolytic Enzymes in Biotechnological and Industrial Processes: A Review

2020 ◽  
Vol 12 (18) ◽  
pp. 7282
Author(s):  
Ogechukwu Bose Chukwuma ◽  
Mohd Rafatullah ◽  
Husnul Azan Tajarudin ◽  
Norli Ismail
Keyword(s):  
Lignocellulosic Biomass ◽  
Textile Industry ◽  
Waste Treatment ◽  
Biofuel Production ◽  
Full Potential ◽  
Lignocellulolytic Enzymes ◽  
Waste Biomass ◽  
End Products ◽  
Pharmaceutical Industries ◽  
Pre Treatment

Tons of anthropological activities contribute daily to the massive amount of lignocellulosic wastes produced annually. Unfortunately, their full potential usually is underutilized, and most of the biomass ends up in landfills. Lignocellulolytic enzymes are vital and central to developing an economical, environmentally friendly, and sustainable biological method for pre-treatment and degradation of lignocellulosic biomass which can lead to the release of essential end products such as enzymes, organic acids, chemicals, feed, and biofuel. Sustainable degradation of lignocellulosic biomass via hydrolysis is achievable by lignocellulolytic enzymes, which can be used in various applications, including but not limited to biofuel production, the textile industry, waste treatment, the food and drink industry, personal care industry, health and pharmaceutical industries. Nevertheless, for this to materialize, feasible steps to overcome the high cost of pre-treatment and lower operational costs such as handling, storage, and transportation of lignocellulose waste need to be deployed. Insight on lignocellulolytic enzymes and how they can be exploited industrially will help develop novel processes that will reduce cost and improve the adoption of biomass, which is more advantageous. This review focuses on lignocellulases, their use in the sustainable conversion of waste biomass to produce valued-end products, and challenges impeding their adoption.

Recent advances in green pre-treatment methods of lignocellulosic biomass for enhanced biofuel production

2021 ◽  
pp. 129038
Author(s):  
Nurul Suhada Ab Rasid ◽  
Amnani Shamjuddin ◽  
Athran Zuhail Abdul Rahman ◽  
Nor Aishah Saidina Amin
Keyword(s):  
Lignocellulosic Biomass ◽  
Biofuel Production ◽  
Treatment Methods ◽  
Recent Advances ◽  
Pre Treatment

scholarly journals Increasing the Biogas Potential of Rapeseed Straw Using Pulsed Electric Field Pre-Treatment

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8307
Author(s):  
Dawid Szwarc ◽  
Katarzyna Głowacka
Keyword(s):  
Electric Field ◽  
Lignocellulosic Biomass ◽  
Biogas Production ◽  
Agricultural Waste ◽  
Control Sample ◽  
Pulsed Electric Field ◽  
Waste Biomass ◽  
Methane Fermentation ◽  
Rapeseed Straw ◽  
Pre Treatment

Due to the high availability of lignocellulosic biomass, which can be obtained from terrestrial plants, agricultural waste biomass, and the agro-food, paper or wood industries, its use for energy production by methane fermentation is economically and environmentally justified. However, due to their complex structures, lignocellulosic substrates have a low conversion factor to biogas. Therefore, scientists are still working on the development of new methods of the pre-treatment of lignocellulosic materials that will increase the biogas productivity from lignocellulosic biomass. The presented research focuses on the use of a pulsed electric field (PEF) to disintegrate rapeseed straw prior to the methane fermentation process. Scanning electron microscopy observation showed that, in the disintegrated sample, the extent of damage to the plant tissue was more severe than in the control sample. In the sample disintegrated for 7 min, the chemical oxygen demand increased from 4146 ± 75 mg/L to 4920 ± 60 mg/L. The best result was achieved with a 5-min PEF pre-treatment. The methane production reached 290.8 ± 12.1 NmL CH4/g VS, and the biogas production was 478.0 ± 27.5 NmL/g VS; it was 14% and 15% higher, respectively, compared to the control sample.

Municipal Solid Waste Treatment Using Plasma Gasification with the Potential Production of Synthesis Gas (Syngas)

2019 ◽  
Vol 2 (1) ◽  
pp. 8-12
Author(s):  
Angela Hartati ◽  
Diah Indriani Widiputri ◽  
Arbi Dimyati
Keyword(s):  
Waste Treatment ◽  
Composition Analysis ◽  
Energy Agency ◽  
Plasma Gasification ◽  
Gasification Process ◽  
Solid Waste Treatment ◽  
Pre Treatment ◽  
Waste Separation ◽  
Gasification Efficiency ◽  
Arc Plasma Torch

This research was conducted for the purpose to overcome Indonesia waste problem. The samples are classified into garden waste, paper waste, wood, food waste, and MSW with objective to identify which type of waste give out more syngas since there is waste separation in Indonesia. All samples were treated by plasma gasification without pre-treatment (drying). Arc plasma torch used in this experiment was made by National Nuclear Energy Agency (BATAN) and used Argon as the gas source. Then the torch was connected to self-designed gasification chamber and gas washing system before injected into a gas bas for composition analysis. Another objective is to identify factors that may affect the gasification efficiency and the experiment shows that moisture content is not really affecting the efficiency but the duration of the process. The mass reduction of each samples were recorded, then the gas produced from the gasification process were analyzed. The result shows that food has the highest mass percentage reduced and producing the highest amount of hydrogen amongst other samples. However, treating MSW also produce considerably high amount of hydrogen. In conclusion, MSW direct treatment (without separation) using plasma gasification is feasible since it still produces desirable quality of syngas.

A Centralized Hazardous Waste Treatment Plant: The Facilities of the Zvsmm at Schwabach as an Example

1994 ◽  
Vol 29 (8) ◽  
pp. 235-250 ◽  
Author(s):  
Norbert Amsoneit
Keyword(s):  
Hazardous Waste ◽  
Waste Treatment ◽  
Treatment Plant ◽  
Waste Incinerator ◽  
Physical Plant ◽  
Treatment Centre ◽  
Hazardous Waste Treatment ◽  
Waste Treatment Plant ◽  
Pre Treatment ◽  
Inorganic Waste

As a rule, hazardous waste needs a pre-treatment, either a thermal or a chemical-physical one, before it can be disposed of at a landfill. The concentration of different kinds of treatment facilities at a Centralized Hazardous Waste Treatment Plant is advantageous. The facility of the ZVSMM at Schwabach is presented as an outstanding example of this kind of Treatment Centre. The infrastructure, the chemical-physical plant with separate lines for the treatment of organic and inorganic waste and the hazardous waste incinerator are described. Their functions are discussed in detail. Emphasis is laid on handling the residues produced by the different treatment processes and the final disposal.

An eco-friendly biomass pretreatment strategy utilizing reusable enzyme mimicking nanoparticles for lignin depolymerization and biofuel production

2021 ◽  
Author(s):  
Rajiv CHANDRA RAJAK ◽  
Pathikrit Saha ◽  
Mamata S Singhvi ◽  
Darae Kwak ◽  
Danil Kim ◽  
...  
Keyword(s):  
Lignocellulosic Biomass ◽  
Biofuel Production ◽  
Biomass Pretreatment ◽  
Enzyme Mimicking ◽  
Lignin Depolymerization

Pretreatment of lignocellulosic biomass to specifically depolymerise lignin moieties without loss of carbohydrates as well as to minimize the generation of harmful intermediates during the process is a major challenge...

Role of microalgae in circular bioeconomy: from waste treatment to biofuel production

2021 ◽  
Author(s):  
Juliana Botelho Moreira ◽  
Thaisa Duarte Santos ◽  
Jessica Hartwig Duarte ◽  
Priscilla Quenia Muniz Bezerra ◽  
Michele Greque de Morais ◽  
...  
Keyword(s):  
Waste Treatment ◽  
Biofuel Production

A highly efficient multi-step methodology for the quantification of micro-(bio)plastics in sludge

2020 ◽  
pp. 0734242X2097409
Author(s):  
Federica Ruggero ◽  
Alexandra E. Porter ◽  
Nikolaos Voulvoulis ◽  
Emiliano Carretti ◽  
Tommaso Lotti ◽  
...  
Keyword(s):  
Organic Waste ◽  
Degradation Process ◽  
Organic Fertilizers ◽  
Critical Conditions ◽  
Organic Fraction ◽  
Initial Oxidation ◽  
Threshold Size ◽  
End Products ◽  
Biological Treatments ◽  
Pre Treatment

The present study develops a multi-step methodology for identification and quantification of microplastics and micro-bioplastics (together called in the current work micro-(bio)plastics) in sludge. In previous studies, different methods for the extraction of microplastics were devised for traditional plastics, while the current research tested the methodology on starch-based micro-bioplastics of 0.1–2 mm size. Compostable bioplastics are expected to enter the anaerobic or aerobic biological treatments that lead to end-products applicable in agriculture; some critical conditions of treatments (e.g. low temperature and moisture) can slow down the degradation process and be responsible for the presence of microplastics in the end-product. The methodology consists of an initial oxidation step, with hydrogen peroxide 35% concentrated to clear the sludge and remove the organic fraction, followed by a combination of flotation with sodium chloride and observation of the residues under a fluorescence microscope using a green filter. The workflow revealed an efficacy of removal from 94% to 100% and from 92% to 96% for plastic fragments, 0.5–2 mm and 0.1–0.5 mm size, respectively. The methodology was then applied to samples of food waste pulp harvested after a shredding pre-treatment in an anaerobic digestion (AD) plant in Italy, where polyethylene, starch-based Mater-Bi® and cellophane microplastics were recovered in amounts of 9 ± 1.3/10 g <2 mm and 4.8 ± 1.2/10 g ⩾2 mm. The study highlights the need to lower the threshold size for the quantification of plastics in organic fertilizers, which is currently set by legislations at 2 mm, by improving the background knowledge about the fate of the micro-(bio)plastics in biological treatments for the organic waste.

Innovative approach to treating waste waters by a membrane capacitive deionisation system

2015 ◽  
Vol 0 (0) ◽  
Author(s):  
Miša Biro ◽  
Darinka Brodnjak Vončina
Keyword(s):  
Water Samples ◽  
Textile Industry ◽  
High Salt ◽  
Innovative Approach ◽  
Waste Waters ◽  
Pre Treatment ◽  
Model Water

AbstractThe application of membrane capacitive deionisation was investigated for treating model water samples and real waste waters from the textile industry. For the pre-treatment of waste waters, nanofiltration was integrated in order to prevent scaling and fouling of membranes and electrodes during membrane capacitive deionisation. Different conditions were applied when treating water samples with membrane capacitive deionisation with the aim of optimising conditions for high desalination efficiency and, consequently, for conductivity reduction. The conductivity of waste waters with high salt concentrations was reduced to the required value, below 1.5 mS cm

Sign in / Sign up

Export Citation Format

Share Document