scholarly journals Inter-Floor Noise Monitoring System for Multi-Dwelling Houses Using Smartphones

2020 ◽  
Vol 12 (12) ◽  
pp. 5065
Author(s):  
Suhyun Kang ◽  
Seungho Kim ◽  
Dongeun Lee ◽  
Sangyong Kim
Keyword(s):  
Noise Source ◽  
Mean Absolute Error ◽  
Low Cost ◽  
Monitoring And Evaluation ◽  
Absolute Error ◽  
Maximum Error ◽  
Sound Level ◽  
Apartment Buildings ◽  
The Mean

The noise between the floors in apartment buildings is becoming a social problem, and the number of disputes related to it are increasing every year. However, laypersons will find it difficult to use the sound level meters because they are expensive, delicate, bulky, etc. Therefore, this study proposes a system to monitor the noise between the floors, that will measure the sound and estimate the location of the noise using the sensors and applications in smartphones. To evaluate how this system can be used effectively within an apartment building, a case study has been performed to verify its validity. The result shows that the mean absolute error (MAE) between the actual noise generating position and the estimated noise source location was measured at 2.8 m, with a minimum error of 1.2 m and a maximum error of 4.3 m. This means that smartphones, in the future, can be used as low-cost monitoring and evaluation devices to measure the noise between the floors in apartment buildings.

scholarly journals Analysis and Forecasting Incidence, Intensive Care Unit Admissions, and Projected Mortality Attributable to COVID-19 in Portugal, the UK, Germany, Italy, and France: Predictions for 4 Weeks Ahead

2021 ◽  
Vol 8 (6) ◽  
pp. 84
Author(s):  
Kathleen Carvalho ◽  
João Paulo Vicente ◽  
Mihajlo Jakovljevic ◽  
João Paulo Ramos Teixeira
Keyword(s):  
Mean Absolute Error ◽  
Absolute Error ◽  
Medical Studies ◽  
Virus Propagation ◽  
Icu Patients ◽  
The United Kingdom ◽  
The Mean ◽  
The Uk ◽  
Vaccination Campaigns

The use of artificial neural networks (ANNs) is a great contribution to medical studies since the application of forecasting concepts allows for the analysis of future diseases propagation. In this context, this paper presents a study of the new coronavirus SARS-COV-2 with a focus on verifying the virus propagation associated with mitigation procedures and massive vaccination campaigns. There were two proposed methodologies in making predictions 28 days ahead for the number of new cases, deaths, and ICU patients of five European countries: Portugal, France, Italy, the United Kingdom, and Germany. A case study of the results of massive immunization in Israel was also considered. The data input of cases, deaths, and daily ICU patients was normalized to reduce discrepant numbers due to the countries’ size and the cumulative vaccination values by the percentage of population immunized (with at least one dose of the vaccine). As a comparative criterion, the calculation of the mean absolute error (MAE) of all predictions presents the best methodology, targeting other possibilities of use for the method proposed. The best architecture achieved a general MAE for the 1-to-28-day ahead forecast, which is lower than 30 cases, 0.6 deaths, and 2.5 ICU patients per million people.

scholarly journals Verification of the BOLAM weather prediction model over the area of Cyprus

2010 ◽  
Vol 23 ◽  
pp. 93-100
Author(s):  
K. Savvidou ◽  
K. Lagouvardos ◽  
S. Michaelides ◽  
V. Kotroni ◽  
P. Constantinides
Keyword(s):  
Prediction Model ◽  
Mean Absolute Error ◽  
Weather Prediction ◽  
Absolute Error ◽  
Probability Of Detection ◽  
Precipitation Event ◽  
Verification Period ◽  
The Mean ◽  
Observing Systems

Abstract. The purpose of this study is the verification of the BOLAM weather prediction model over the area of Cyprus. The verification period spans from 1 January 2007 till 31 December 2007 and the parameters studied are: temperature, wind and precipitation. The model forecasts are compared to the observations recorded at three locations on the island, where Automatic Weather Observing Systems are operated by the Meteorological Service of Cyprus, namely, those of Larnaka and Paphos Airports and at Athalassa. The statistical analysis includes calculation of the mean error, the mean absolute error and the standard deviation. Based on the construction of a contingency table, the probability of detection of a precipitation event and the false alarm rate are calculated. Finally, an example of BOLAM forecasts for a case study of a low pressure affecting Cyprus during winter is presented and discussed.

scholarly journals Forecasted Incidence, Intensive Care Unit Admissions and Projected Mortality attributable to Covid-19 in Portugal, UK, Germany, Italy and France – 4 weeks Ahead

2021 ◽  
Author(s):  
Kathleen Carvalho ◽  
João Paulo Vicente ◽  
Mihajlo Jakovljevic ◽  
João Paulo Teixeira
Keyword(s):  
Mean Absolute Error ◽  
Absolute Error ◽  
Data Input ◽  
Medical Studies ◽  
Great Contribution ◽  
Virus Propagation ◽  
Icu Patients ◽  
The Mean ◽  
Vaccination Campaigns

The use of Artificial Neural Networks (ANN) is a great contribution to medical studies since the application of forecasting concepts allows the analysis of future diseases propagations. In this context, this paper presents a study of the new coronavirus SARS-COV-2 with a focus on verifying the virus propagation associated with mitigation procedures and massive vaccination campaigns. There were proposed two methodologies to predict 28 days ahead the number of new cases, deaths, and ICU patients of five European countries: Portugal, France, Italy, United Kingdom, and Germany, and a case study of the results of massive immunization in Israel. The data input of cases, deaths, and daily ICU patients was normalized to reduce discrepant numbers due to the countries size, and the cumulative vaccination values by the percentage of population immunized, at least with one dose of vaccine. As a comparative criterion, the calculation of the mean absolute error (MAE) of all predictions presents the best methodology and targets other possibilities of use for the proposed method. The best architecture achieved a general MAE for the 1 to 28 days ahead forecast lower than 30 cases, 0,6 deaths and 2,5 ICU patients by million people.

Explanation Plus Prediction—The Logical Focus of Project Management Research

2021 ◽  
pp. 875697282199994
Author(s):  
Joseph F. Hair ◽  
Marko Sarstedt
Keyword(s):  
Project Management ◽  
Statistical Models ◽  
Predictive Power ◽  
Mean Absolute Error ◽  
Explanatory Power ◽  
Absolute Error ◽  
Model Parameters ◽  
Mean Square ◽  
Management Research ◽  
The Mean

Most project management research focuses almost exclusively on explanatory analyses. Evaluation of the explanatory power of statistical models is generally based on F-type statistics and the R 2 metric, followed by an assessment of the model parameters (e.g., beta coefficients) in terms of their significance, size, and direction. However, these measures are not indicative of a model’s predictive power, which is central for deriving managerial recommendations. We recommend that project management researchers routinely use additional metrics, such as the mean absolute error or the root mean square error, to accurately quantify their statistical models’ predictive power.

Visualizing the Variance of a Random Variable

2011 ◽  
Vol 18 (01) ◽  
pp. 71-85
Author(s):  
Fabrizio Cacciafesta
Keyword(s):  
Stochastic Dominance ◽  
Mean Absolute Error ◽  
Random Variable ◽  
Absolute Error ◽  
Second Order ◽  
Taylor Formula ◽  
Order Stochastic Dominance ◽  
The Mean ◽  
Second Order Stochastic Dominance ◽  
Options Theory

We provide a simple way to visualize the variance and the mean absolute error of a random variable with finite mean. Some application to options theory and to second order stochastic dominance is given: we show, among other, that the "call-put parity" may be seen as a Taylor formula.

scholarly journals Direct Calculation of Thermodynamic Wet-Bulb Temperature as a Function of Pressure and Elevation

2013 ◽  
Vol 30 (8) ◽  
pp. 1757-1765 ◽  
Author(s):  
Sayed-Hossein Sadeghi ◽  
Troy R. Peters ◽  
Douglas R. Cobos ◽  
Henry W. Loescher ◽  
Colin S. Campbell
Keyword(s):  
Air Temperature ◽  
Mean Absolute Error ◽  
Direct Calculation ◽  
Ambient Air ◽  
Absolute Error ◽  
Mean Square ◽  
Air Temperatures ◽  
Order Polynomial ◽  
The Mean ◽  
Very High

Abstract A simple analytical method was developed for directly calculating the thermodynamic wet-bulb temperature from air temperature and the vapor pressure (or relative humidity) at elevations up to 4500 m above MSL was developed. This methodology was based on the fact that the wet-bulb temperature can be closely approximated by a second-order polynomial in both the positive and negative ranges in ambient air temperature. The method in this study builds upon this understanding and provides results for the negative range of air temperatures (−17° to 0°C), so that the maximum observed error in this area is equal to or smaller than −0.17°C. For temperatures ≥0°C, wet-bulb temperature accuracy was ±0.65°C, and larger errors corresponded to very high temperatures (Ta ≥ 39°C) and/or very high or low relative humidities (5% < RH < 10% or RH > 98%). The mean absolute error and the root-mean-square error were 0.15° and 0.2°C, respectively.

scholarly journals A Novel Neural Network Model for Blood Pressure Estimation Using Photoplethesmography without Electrocardiogram

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Ludi Wang ◽  
Wei Zhou ◽  
Ying Xing ◽  
Xiaoguang Zhou
Keyword(s):  
Neural Network ◽  
Blood Pressure ◽  
Mean Absolute Error ◽  
Wearable Sensors ◽  
Absolute Error ◽  
Noninvasive Estimation ◽  
Treatment Of Hypertension ◽  
The Mean ◽  
Artificial Neural Network Ann ◽  
Blood Pressure Estimation

The prevention, evaluation, and treatment of hypertension have attracted increasing attention in recent years. As photoplethysmography (PPG) technology has been widely applied to wearable sensors, the noninvasive estimation of blood pressure (BP) using the PPG method has received considerable interest. In this paper, a method for estimating systolic and diastolic BP based only on a PPG signal is developed. The multitaper method (MTM) is used for feature extraction, and an artificial neural network (ANN) is used for estimation. Compared with previous approaches, the proposed method obtains better accuracy; the mean absolute error is 4.02 ± 2.79 mmHg for systolic BP and 2.27 ± 1.82 mmHg for diastolic BP.

Validating the usefulness of sectorwise regression of visual field in the central 10°

2021 ◽  
pp. bjophthalmol-2020-317391
Author(s):  
Takashi Omoto ◽  
Hiroshi Murata ◽  
Yuri Fujino ◽  
Masato Matsuura ◽  
Takehiro Yamashita ◽  
...  
Keyword(s):  
Visual Field ◽  
Mean Absolute Error ◽  
Open Angle Glaucoma ◽  
Absolute Error ◽  
Open Angle ◽  
Clustering Method ◽  
Significant Difference ◽  
The Mean ◽  
Test Points

AimTo evaluate the usefulness of the application of the clustering method to the trend analysis (sectorwise regression) in comparison with the pointwise linear regression (PLR).MethodsThis study included 153 eyes of 101 patients with open-angle glaucoma. With PLR, the total deviation (TD) values of the 10th visual field (VF) were predicted using the shorter VF sequences (from first 3 to 9) by extrapolating TD values against time in a pointwise manner. Then, 68 test points were stratified into 29 sectors. In each sector, the mean of TD values was calculated and allocated to all test points belonging to the sector. Subsequently, the TD values of the 10th VF were predicted by extrapolating the allocated TD value against time in a pointwise manner. Similar analyses were conducted to predict the 11th–16th VFs using the first 10 VFs.ResultsWhen predicting the 10th VF using the shorter sequences, the mean absolute error (MAE) values were significantly smaller in the sectorwise regression than in PLR. When predicting from the 11th and 16th VFs using the first 10 VFs, the MAE values were significantly larger in the sectorwise regression than in PLR when predicting the 11th VF; however, no significant difference was observed with other VF predictions.ConclusionAccurate prediction was achieved using the sectorwise regression, in particular when a small number of VFs were used in the prediction. The accuracy of the sectorwise regression was not hampered in longer follow-up compared with PLR.

Accuracy Assessment of TanDEM-X 90 and CartoDEM Using ICESat-2 Datasets for Plain Regions of Ratlam City and Surroundings

2021 ◽  
Vol 10 (1) ◽  
pp. 59
Author(s):  
Unnati Yadav ◽  
Ashutosh Bhardwaj
Keyword(s):  
Mean Absolute Error ◽  
Accuracy Assessment ◽  
Absolute Error ◽  
Terrain Analysis ◽  
Mean Square ◽  
High Quality ◽  
Ice Cloud ◽  
The Mean ◽  
Cut And Fill ◽  
Statistical Results

The spaceborne LiDAR dataset from the Ice, Cloud, and Land Elevation Satellite (ICESat-2) provides highly accurate measurements of heights for the Earth’s surface, which helps in terrain analysis, visualization, and decision making for many applications. TanDEM-X 90 (90 m) and CartoDEM V3R1 (30 m) elevation are among the high-quality openly accessible DEM datasets for the plain regions in India. These two DEMs are validated against the ICESat-2 elevation datasets for the relatively plain areas of Ratlam City and its surroundings. The mean error (ME), mean absolute error (MAE), and root mean square error (RMSE) of TanDEM-X 90 DEM are 1.35 m, 1.48 m, and 2.19 m, respectively. The computed ME, MAE, and RMSE for CartoDEM V3R1 are 3.05 m, 3.18 m, and 3.82 m, respectively. The statistical results reveal that TanDEM-X 90 performs better in plain areas than CartoDEMV3R1. The study further indicates that these DEMs and spaceborne LiDAR datasets can be useful for planning various works requiring height as an important parameter, such as the layout of pipelines or cut and fill calculations for various construction activities. The TanDEM-X 90 can assist planners in quick assessments of the terrain for infrastructural developments, which otherwise need time-consuming traditional surveys using theodolite or a total station.

Intraocular lenses optic power calculation with seven formulas in short eyes

2021 ◽  
pp. 57-61
Author(s):  
K.B. Pershin ◽  
◽  
N.F. Pashinova ◽  
I.A. Likh ◽  
А.Y. Tsygankov ◽  
...  
Keyword(s):  
Axial Length ◽  
Mean Absolute Error ◽  
Optical Power ◽  
Absolute Error ◽  
Intraocular Lenses ◽  
Power Calculation ◽  
Retrospective Comparison ◽  
Monofocal Iol ◽  
The Mean ◽  
Axial Eye Length

Purpose. The choice of the optimal formula for calculating the IOL optical power in patients with an axial eye length of less than 20 mm. Material and methods. A total of 78 patients (118 eyes) were included in the prospective study. 1st group included 30 patients (52 eyes) with short eyes (average axial eye length of 19.60±0.42 (18.54–20.0) mm), 2nd group consisted of 48 patients (66 eyes) with a axial length 22.75±0.46 (22.0–23.77) mm. Various monofocal IOL models were used. The average follow-up period was 13 months. IOL optical power was calculated using the SRK/T formula, retrospective comparison – according to the formulas Hoffer-Q, Holladay II, Olsen, Haigis, Barrett Universal II and Kane. Results. In 1st group, the mean absolute error was determined for the formulas Haigis, Olsen, Barrett Universal II, Kane, SRK/T, Holladay II and Hoffer-Q (0.85, 0.78, 0.21, 0.17, 0.79, 0.73, 0.19 respectively). When comparing the formulas, significant differences were found for the formulas Hoffer-Q, Barrett Universal II and Kane in comparison with the formulas Haigis, Olsen, SRK/T and Holladay II (p<0.05) in all cases, respectively. In 2nd group, the mean absolute error was determined for the formulas Haigis, Olsen, Barrett Universal II, Kane, SRK/T, Holladay II and Hoffer-Q (0.15, 0.16, 0.23, 0.10, 0.19, 0.23, 0,29 respectively). In 2nd group, there were no significant differences between the studied formulas (p>0.05). Conclusion. This paper presents an analysis of data on the effectiveness of seven formulas for calculating the IOL optical power in short (less than 20 mm) eyes in comparison with the normal axial length. The advantage of the Hoffer-Q, Barrett Universal II and Kane formulas over Haigis, Holladay II, Olsen, and SRK/T is shown. Key words: cataract, hypermetropia, short eyes, calculation of the IOL optical power.

Sign in / Sign up

Export Citation Format

Share Document