scholarly journals Does Use Matter? Comparison of Environmental Impacts of Clothing Based on Fiber Type

2018 ◽  
Vol 10 (7) ◽  
pp. 2524 ◽  
Author(s):  
Kirsi Laitala ◽  
Ingun Klepp ◽  
Beverley Henry
Keyword(s):  
Environmental Impact ◽  
Literature Review ◽  
Environmental Impacts ◽  
Fiber Type ◽  
Fiber Types ◽  
Environmentally Sustainable ◽  
Sustainability Index ◽  
Durable Products ◽  
Use Phase ◽  
Empirical Material

Several tools have been developed to compare the environmental impact of textiles. The most widely used are Higg Materials Sustainability Index (MSI) and MADE-BY Fiber Benchmark. They use data from production to evaluate the environmental impacts of textiles differentiated by fiber type. The use phase is excluded from both tools. This article discusses whether there is evidence that the use of textiles differs systematically between different fiber types and examines the consequences of comparing the environmental impacts of clothing based on differences in production of fibers alone without including differences in their use. The empirical material in this paper is based on analysis of rating tools and a literature review on clothing use. It shows that fiber content contributes to the way consumers take care of and use their clothing. When use is omitted, major environmental problems associated with this stage, such as spread of microplastics, are also excluded. This one-sided focus on material production impacts also excludes the importance of product lifespans, quality, and functionality. The consequence is that short-lived disposable products are equated with durable products. Comparing dissimilar garments will not help consumers to make choices that will reduce the environmental burden of clothing. We need an informed discussion on how to use all materials in the most environmentally sustainable way possible.

Der Umsatz-Nachhaltigkeitsindex*/The Turnover-Sustainability-Index

2016 ◽  
Vol 106 (03) ◽  
pp. 136-140
Author(s):  
R. Miehe ◽  
M. Wiedenmann ◽  
T. Prof. Bauernhansl
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Sustainability Index ◽  
Behavior Based ◽  
Comparative Examination

Die Ökobilanz hat sich als Instrument zur Bewertung der Umweltauswirkungen von Produkten und Prozessen durchgesetzt. Dennoch stellt ihre Durchführung Nutzer immer wieder vor Herausforderungen. Der Fachartikel präsentiert einen Ansatz für eine vergleichende Betrachtung der ökologischen Auswirkungen des unternehmerischen Handelns auf Basis der jeweiligen Unternehmens- und Branchenumsätze. Der Umsatz-Nachhaltigkeitsindex soll als Konzept für ein Benchmark für Unternehmen einer Branche dienen.   Life Cycle Assessment has prevailed as an instrument to evaluate the environmental impact of products and processes. Its execution, however, poses a challenge to operators. In this paper, we present an approach for a comparative examination of environmental impacts of industrial behavior based on the turnover of companies and their equivalent sectors. The Turnover-Sustainability-Index serves as a benchmark for companies within a sector.

scholarly journals Comparative Assessment of Environmental Impacts from Open-Cut Pipeline Replacement and Trenchless Cured-in-Place Pipe Renewal Method for Sanitary Sewers

2020 ◽  
Vol 5 (6) ◽  
pp. 48 ◽  
Author(s):  
Vinayak Kaushal ◽  
Mohammad Najafi
Keyword(s):  
Environmental Impact ◽  
Literature Review ◽  
Environmental Impacts ◽  
Small Diameter ◽  
Ecological Impacts ◽  
Hot Water ◽  
Pipe Material ◽  
Liner Material ◽  
Thermoset Resin ◽  
Sanitary Sewers

An environmental impact assessment (EIA) involves the evaluation of information about pipe raw materials, processes, and product manufacturing to obtain the associated emissions and ecological impacts. Open-cut (OC) pipeline replacement involves digging a trench along the length of the proposed pipeline, placing the pipe in the trench on suitable bedding materials, and then embedding and backfilling. The trenchless cured-in-place pipe (CIPP) method involves a liquid thermoset resin saturated material that is inserted into the existing pipeline by hydrostatic or air inversion or by mechanically pulling-in and inflating. The liner material is cured-in-place using hot water or steam or light cured using ultraviolet light, resulting in the CIPP product. The objectives of this paper are: (1) to present a literature review on the progress acquired over the years in understanding the environmental impacts from the OC and CIPP methods, (2) to analyze and compare the environmental impacts for small diameter sanitary sewers (SDSS) using USEPA’s tool for the reduction and assessment of chemical and other environmental impacts (TRACI) methodology from the SimaPro software, and (3) to identify the factors that influence the environment for the OC and CIPP methods. Published papers were identified that reported the environmental impacts from the OC and CIPP methods over a period from 1989 through to 2020. An actual case study based on the City of Pasadena, California, river basin was used to carry out an environmental analysis for small diameter OC and CIPP methods. The literature review suggests that the material production phase consumes a large amount of energy and is a major contributor of environmental impacts. Higher environmental impacts from the OC method are a result of longer project durations and more equipment requirements compared to the CIPP. The assessment results show that, on average, CIPP renewal caused 68% less environmental impact, 75% less impact on human health, and 62% less resource depletion as compared to the OC replacement for SDSS. The liner, felt, and resin influenced the environment the most for CIPP as compared to the OC method, where the power consumption of construction equipment and the pipe material had the greatest environmental impacts. It can be concluded that the comparison of the environmental impacts from pipeline renewal and replacement is an important element when considering a sustainable underground infrastructure development. The pipe material and outside diameter should be considered during the installation phase by OC and CIPP methods to allow a detailed evaluation and comparison of their sustainability impacts. This study can be further developed for analyzing the environmental impacts and associated costs of the OC and CIPP methods for sanitary sewers with different project and site conditions.

Exergoenvironomic modelling and performance assessment of selected gas turbine power plants

2016 ◽  
Vol 13 (2) ◽  
pp. 149-162
Author(s):  
Sunday Olayinka Oyedepo ◽  
Richard Olayiwola Fagbenle ◽  
Samuel Sunday Adefila ◽  
Md Mahbub Alam
Keyword(s):  
Environmental Impact ◽  
Gas Turbine ◽  
Environmental Impacts ◽  
Flow Rate ◽  
Power Plants ◽  
Inlet Temperature ◽  
Content Type ◽  
Total Cost ◽  
Sustainability Index ◽  
Cost Flow

Purpose This study aims to use an environomics method to assess the environmental impacts of selected gas turbine power plants in Nigeria. Design/methodology/approach In this study, exergoenvironomic analysis has been carried out to investigate the environmental impact of selected gas turbine power plants in Nigeria from an exergetic point of view. Findings The exergy analysis reveals that the combustion chamber is the most exergy destructive component compared to other cycle components. The exergy destruction of this component can be reduced by increasing gas turbine inlet temperature (GTIT). The results of the study show that thermodynamic inefficiency is responsible for the environmental impact associated with gas turbine components. The study further shows that CO2 emissions and cost of environmental impact decrease with increasing GTIT. Originality/value The exergo-environomic parameters computed in this study are CO2 emission in kg per MWh of electricity generated, depletion number, sustainability index, cost flow rate of environmental impacts (Ċenv) in $/h and total cost rates of products (ĊTot) in $/hr. For the period considered, the CO2 emissions for the selected plants vary from 100.18 to 408.78 kgCO2/MWhm, while cost flow rate of environmental impacts varies from $40.18 /h to $276.97 /h and the total cost rates of products vary from $2935.69/h to $12,232.84/h. The depletion number and sustainability index vary from 0.69 to 0.84 and 1.20 to 1.44, respectively.

scholarly journals RESÍDUOS DA CONSTRUÇÃO CIVIL: O NOVO OLHAR PARA A RECICLAGEM

2021 ◽  
Vol 9 (205) ◽  
pp. 1-17
Author(s):  
Gustavo Perpetuo Serinolli
Keyword(s):  
Environmental Impact ◽  
Literature Review ◽  
Environmental Impacts ◽  
New Products ◽  
Management Plan ◽  
Building Construction ◽  
Construction Sites ◽  
Final Destination ◽  
Materials Used

The waste of materials used in building construction are the main responsible for generating CCW on construction sites. Recycling CCW is an option to minimize the environmental impact caused by it, so that these residues can return as new products for civil construction. The final destination of CCW must be done in dumps, controlled landfills or sanitary, the latter being the most favorable option to the environment, when the disposal is irregular the damage to the environment is significant, due to the variety of materials discarded. The recycling of CCW provides the reuse of waste, which previously would be discarded, in products that have the advantage of reducing spending on the purchase of inputs, and contribute to sustainable. With this, this article aims to discuss sustainability through the recycling of CCW and its final destination. A literature review was carried out through the bibliographic research of articles, scientific works and books according to the theme in the last 20 years. It is concluded that it is essential to have a CCW Management Plan in future works in order to control the generation, recycling and disposal of waste, thus minimizing environmental impacts.

Structural Organization and Distribution of Fiber Types in Extraocular Muscles of Cats

1972 ◽  
Vol 30 ◽  
pp. 34-35
Author(s):  
Asish C. Nag ◽  
Lee D. Peachey
Keyword(s):  
Fiber Type ◽  
Light And Electron Microscopy ◽  
Small Diameter ◽  
Extraocular Muscles ◽  
Fiber Types ◽  
Distinctive Features ◽  
Superior Rectus ◽  
Adult Cats ◽  
Different Diameters ◽  
Orbital Region

Cat extraocular muscles consist of two regions: orbital, and global. The orbital region contains predominantly small diameter fibers, while the global region contains a variety of fibers of different diameters. The differences in ultrastructural features among these muscle fibers indicate that the extraocular muscles of cats contain at least five structurally distinguishable types of fibers.Superior rectus muscles were studied by light and electron microscopy, mapping the distribution of each fiber type with its distinctive features. A mixture of 4% paraformaldehyde and 4% glutaraldehyde was perfused through the carotid arteries of anesthetized adult cats and applied locally to exposed superior rectus muscles during the perfusion.

scholarly journals Assessing the Environmental Impact and Cost of the Tourism-Induced CO2, NOx, SOx Emission in China

2021 ◽  
Vol 13 (2) ◽  
pp. 604
Author(s):  
Yalan Shi ◽  
Miaojing Yu
Keyword(s):  
Environmental Impact ◽  
Environmental Impacts ◽  
Full Range ◽  
Correlation Effect ◽  
Tourism Industry ◽  
Pollutant Emissions ◽  
Travel Agency ◽  
Sustainable Mobility ◽  
Industrial Sectors ◽  
Direct Emission

Tourism, as one economic activity, results in a full range of environmental impacts globally as well as in China. However, the evaluation of environmental impacts is insufficient because of the strong correlation effect between tourism and other industries. This study attempted to assess the environmental impact and cost of the tourism-induced pollutant emissions (in a broad sense) at the national scale through constructing the environmental-economic input-output model. Our results suggested that the China’s total emission of CO2, NOx, SOx related to tourism industry increased from 42 × 106 t, 162 kt, 345 kt in 1995 to 157 × 106 t, 527 kt, 854 kt in 2009. The indirect CO2, NOx, and SOx emissions of tourism and related industries were nearly 6.8–11 times of their direct emission in travel agency. Most of these indirect emissions (73% of CO2 in 2009, 54% of NOx in 1995, 62% of SOx in 2009) are derived from the energy plants and industrial sectors. The sustainable tourism should largely depend on the realization of sustainable mobility and transportation, through the low-emission behavior and energy-saving technology. The emission reduction cost of tourism industry in China was 30,170 and 172,812 million CNY in 1995 and 2009, accounting for nearly 14% of the total tourism revenue.

scholarly journals Fiber-type susceptibility to eccentric contraction-induced damage of hindlimb-unloaded rat AL muscles

2001 ◽  
Vol 90 (3) ◽  
pp. 770-776 ◽  
Author(s):  
K. Vijayan ◽  
J. L. Thompson ◽  
K. M. Norenberg ◽  
R. H. Fitts ◽  
D. A. Riley
Keyword(s):  
Fiber Type ◽  
Motor Nerve ◽  
Eccentric Contraction ◽  
Fiber Types ◽  
Serial Sections ◽  
Hybrid Fiber ◽  
Hybrid Fibers ◽  
Semithin Sections ◽  
Adductor Longus

Slow oxidative (SO) fibers of the adductor longus (AL) were predominantly damaged during voluntary reloading of hindlimb unloaded (HU) rats and appeared explainable by preferential SO fiber recruitment. The present study assessed damage after eliminating the variable of voluntary recruitment by tetanically activating all fibers in situ through the motor nerve while applying eccentric (lengthening) or isometric contractions. Muscles were aldehyde fixed and resin embedded, and semithin sections were cut. Sarcomere lesions were quantified in toluidine blue-stained sections. Fibers were typed in serial sections immunostained with antifast myosin and antitotal myosin (which highlights slow fibers). Both isometric and eccentric paradigms caused fatigue. Lesions occurred only in eccentrically contracted control and HU muscles. Fatigue did not cause lesions. HU increased damage because lesioned- fiber percentages within fiber types and lesion sizes were greater than control. Fast oxidative glycolytic (FOG) fibers were predominantly damaged. In no case did damaged SO fibers predominate. Thus, when FOG, SO, and hybrid fibers are actively lengthened in chronically unloaded muscle, FOG fibers are intrinsically more susceptible to damage than SO fibers. Damaged hybrid-fiber proportions ranged between these extremes.

The KATP channel Kir6.2 subunit content is higher in glycolytic than oxidative skeletal muscle fibers

2011 ◽  
Vol 301 (4) ◽  
pp. R916-R925 ◽  
Author(s):  
Krystyna Banas ◽  
Charlene Clow ◽  
Bernard J. Jasmin ◽  
Jean-Marc Renaud
Keyword(s):  
Skeletal Muscle ◽  
Cross Sections ◽  
Fiber Type ◽  
Energy Levels ◽  
Muscle Fibers ◽  
Metabolic Stress ◽  
Oxidative Capacity ◽  
Fiber Types ◽  
Fiber Damage ◽  
The Individual

It has long been suggested that in skeletal muscle, the ATP-sensitive K+ channel (KATP) channel is important in protecting energy levels and that abolishing its activity causes fiber damage and severely impairs function. The responses to a lack of KATP channel activity vary between muscles and fibers, with the severity of the impairment being the highest in the most glycolytic muscle fibers. Furthermore, glycolytic muscle fibers are also expected to face metabolic stress more often than oxidative ones. The objective of this study was to determine whether the t-tubular KATP channel content differs between muscles and fiber types. KATP channel content was estimated using a semiquantitative immunofluorescence approach by staining cross sections from soleus, extensor digitorum longus (EDL), and flexor digitorum brevis (FDB) muscles with anti-Kir6.2 antibody. Fiber types were determined using serial cross sections stained with specific antimyosin I, IIA, IIB, and IIX antibodies. Changes in Kir6.2 content were compared with changes in CaV1.1 content, as this Ca2+ channel is responsible for triggering Ca2+ release from sarcoplasmic reticulum. The Kir6.2 content was the lowest in the oxidative soleus and the highest in the glycolytic EDL and FDB. At the individual fiber level, the Kir6.2 content within a muscle was in the order of type IIB > IIX > IIA ≥ I. Interestingly, the Kir6.2 content for a given fiber type was significantly different between soleus, EDL, and FDB, and highest in FDB. Correlations of relative fluorescence intensities from the Kir6.2 and CaV1.1 antibodies were significant for all three muscles. However, the variability in content between the three muscles or individual fibers was much greater for Kir6.2 than for CaV1.1. It is suggested that the t-tubular KATP channel content increases as the glycolytic capacity increases and as the oxidative capacity decreases and that the expression of KATP channels may be linked to how often muscles/fibers face metabolic stress.

Rostrocaudal pattern of fiber-type changes in an overloaded rat ankle extensor

1991 ◽  
Vol 71 (2) ◽  
pp. 558-564 ◽  
Author(s):  
P. F. Gardiner ◽  
B. J. Jasmin ◽  
P. Corriveau
Keyword(s):  
Fiber Type ◽  
Muscle Length ◽  
Similar Degree ◽  
Complex Nature ◽  
Type I ◽  
Fiber Types ◽  
Type Ii ◽  
Cross Sectional ◽  
Hypertrophic Response ◽  
Type I Fibers

Our aim was to quantify the overload-induced hypertrophy and conversion of fiber types (type II to I) occurring in the medial head of the gastrocnemius muscle (MG). Overload of MG was induced by a bilateral tenotomy/retraction of synergists, followed by 12–18 wk of regular treadmill locomotion (2 h of walking/running per day on 3 of 4 days). We counted all type I fibers and determined type I and II mean fiber areas in eight equidistant sections taken along the length of control and overloaded MG. Increase in muscle weights (31%), as well as in total muscle cross-sectional areas (37%) and fiber areas (type I, 57%; type II, 34%), attested to a significant hypertrophic response in overloaded MG. An increase in type I fiber composition of MG from 7.0 to 11.5% occurred as a result of overload, with the greatest and only statistically significant changes (approximately 70–100%) being found in sections taken from the most rostral 45% of the muscle length. Results of analysis of sections taken from the largest muscle girth showed that it significantly underestimated the extent of fiber conversion that occurred throughout the muscle as a whole. These data obtained on the MG, which possesses a compartmentalization of fiber types, support the notion that all fiber types respond to this model with a similar degree of hypertrophy. Also, they emphasize the complex nature of the adaptive changes that occur in these types of muscles as a result of overload.

scholarly journals Analysis of the Characteristics of Environmental Impacts According to the Cut-Off Criteria Applicable to the Streamlined Life Cycle Assessment (S-LCA) of Apartment Buildings in South Korea

2021 ◽  
Vol 13 (5) ◽  
pp. 2898
Author(s):  
Rakhyun Kim ◽  
Myung-Kwan Lim ◽  
Seungjun Roh ◽  
Won-Jun Park
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Impact Analysis ◽  
Impact Categories ◽  
Environmental Impact Analysis ◽  
Apartment Buildings ◽  
Environmental Impact Categories ◽  
Weight Percentile

This study analyzed the characteristics of the environmental impacts of apartment buildings, a typical housing type in South Korea, as part of a research project supporting the streamlined life cycle assessment (S-LCA) of buildings within the G-SEED (Green Standard for Energy and Environmental Design) framework. Three recently built apartment building complexes were chosen as study objects for the quantitative evaluation of the buildings in terms of their embodied environmental impacts (global warming potential, acidification potential, eutrophication potential, ozone layer depletion potential, photochemical oxidant creation potential, and abiotic depletion potential), using the LCA approach. Additionally, we analyzed the emission trends according to the cut-off criteria of the six environmental impact categories by performing an S-LCA with cut-off criteria 90–99% of the cumulative weight percentile. Consequently, we were able to present the cut-off criterion best suited for S-LCA and analyze the effect of the cut-off criteria on the environmental impact analysis results. A comprehensive environmental impact analysis of the characteristics of the six environmental impact categories revealed that the error rate was below 5% when the cut-off criterion of 97.5% of the cumulative weight percentile was applied, thus verifying its validity as the optimal cut-off criterion for S-LCA.

Sign in / Sign up

Export Citation Format

Share Document