scholarly journals Protonated Forms of Layered Perovskite-Like Titanate NaNdTiO4: Neutron and X-ray Diffraction Structural Analysis

Solids ◽  
2021 ◽  
Vol 2 (3) ◽  
pp. 265-277
Author(s):  
Oleg I. Silyukov ◽  
Sergey A. Kurnosenko ◽  
Iana A. Minich ◽  
Ivan A. Rodionov ◽  
Irina A. Zvereva
Keyword(s):  
Interlayer Space ◽  
Low Frequency ◽  
Protonated Form ◽  
The Other ◽  
Layered Perovskite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sodium Cations ◽  
Protonated Forms ◽  
Oxygen Atoms

Structures of partially and completely protonated Ruddlesden–Popper phases, H0.7Na0.3NdTiO4·0.3H2O and HNdTiO4, have been established by means of neutron and X-ray diffraction analysis and compared among themselves as well as with that of the initial titanate NaNdTiO4. It was shown that while interlayer sodium cations in the partially protonated form are coordinated by nine oxygen atoms, including one related to intercalated water, in the fully protonated compound the ninth oxygen proves to be an axial anion belonging to the opposite slab of titanium-oxygen octahedra. Moreover, the partially protonated titanate was found to significantly differ from the other two in the octahedron distortion pattern. It is characterized by a weakly pronounced elongation of the octahedra towards the Nd-containing interlayer space making Ti4+ cations practically equidistant from both axial oxygen atoms, which is accompanied by a low-frequency shift of the bands relating to the asymmetric stretching mode of axial Ti–O bonds observed in the Raman spectra.

PHASE TRANSITION IN LAYERED PEROVSKITE LIKE MANGANATE Ca3Mn2O7 UNDER HIGH PRESSURE

2001 ◽  
Vol 15 (18) ◽  
pp. 2491-2497 ◽  
Author(s):  
J. L. ZHU ◽  
L. C. CHEN ◽  
R. C. YU ◽  
F. Y. LI ◽  
J. LIU ◽  
...  
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
Diamond Anvil Cell ◽  
The Other ◽  
Layered Perovskite ◽  
X Ray Diffraction ◽  
Two Phase ◽  
X Ray ◽  
Diamond Anvil

In situ high pressure energy dispersive X-ray diffraction measurements on layered perovskite-like manganate Ca 3 Mn 2 O 7 under pressures up to 35 GPa have been performed by using diamond anvil cell with synchrotron radiation. The results show that the structure of layered perovskite-like manganate Ca 3 Mn 2 O 7 is unstable under pressure due to the easy compression of NaCl-type blocks. The structure of Ca 3 Mn 2 O 7 underwent two phase transitions under pressures in the range of 0~35 GPa. One was at about 1.3 GPa with the crystal structure changing from tetragonal to orthorhombic. The other was at about 9.5 GPa with the crystal structure changing from orthorhombic back to another tetragonal.

The Electron Effect of Aromatic Group: Control Conformation of 2-Aromatic Cyclododecanone Derivatives

2020 ◽  
Vol 24 (10) ◽  
pp. 1139-1147
Author(s):  
Yang Mingyan ◽  
Wang Daoquan ◽  
Wang Mingan
Keyword(s):  
1H Nmr ◽  
13C Nmr ◽  
Nmr Spectra ◽  
Coupling Constants ◽  
The Other ◽  
Repulsive Interaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electron Effect ◽  
Group Control

2-Phenylcyclododecanone and 2-cyclohexylcyclododecanone derivatives were synthesized and characterized by 1H NMR, 13C NMR, HR-ESI-MS and X-ray diffraction. Their preferred conformations were analyzed by the coupling constants in the 1H NMR spectra and X-ray diffraction, which showed the skeleton ring of these derivatives containing [3333]-2-one conformation, and the phenyl groups were located at the side-exo position of [3333]-2-one conformation due to the strong π-π repulsive interaction between the π- electron of benzene ring and π-electron of carbonyl group. The cyclohexyl groups were located at the corner-syn or the side-exo position of [3333]-2-one conformation depending on the hindrance of the other substituted groups. The π-π electron effect played a crucial role in efficiently controlling the preferred conformation of 2-aromatic cyclododecanone and the other 2-aromatic macrocyclic derivatives with the similar preferred square and rectangular conformations.

Theoretically derived thermodynamic properties can be improved by the refinement of low-frequency modes against X-ray diffraction data

2021 ◽  
Author(s):  
Anna Agnieszka Hoser ◽  
Marcin Sztylko ◽  
Damian Trzybiński ◽  
Anders Østergaard Madsen
Keyword(s):  
Thermodynamic Properties ◽  
Dft Calculations ◽  
Diffraction Data ◽  
Molecular Crystals ◽  
Low Frequency ◽  
X Ray Diffraction ◽  
X Ray ◽  
Efficient Approach

A framework for estimation of thermodynamic properties for molecular crystals via refinement of frequencies from DFT calculations against X-ray diffraction data is presented. The framework provides an efficient approach to...

scholarly journals Influence of Li2CO3 addition on electrical and magnetic properties of Ni0.6Mg0.4Fe2O4

2020 ◽  
Vol 10 (03) ◽  
pp. 2050003
Author(s):  
M. R. Hassan ◽  
M. T. Islam ◽  
M. N. I. Khan
Keyword(s):  
Magnetic Properties ◽  
Single Phase ◽  
Low Frequency ◽  
Solid State Reaction Method ◽  
Charge Carriers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrical And Magnetic Properties ◽  
Frequency Regime ◽  
Xrd Patterns

In this research, influence of adding Li2CO3 (at 0%, 2%, 4%, 6%) on electrical and magnetic properties of [Formula: see text][Formula: see text]Fe2O4 (with 60% Ni and 40% Mg) ferrite has been studied. The samples are prepared by solid state reaction method and sintered at 1300∘C for 6[Formula: see text]h. X-ray diffraction (XRD) patterns show the samples belong to single-phase cubic structure without any impurity phase. The magnetic properties (saturation magnetization and coercivity) of the samples have been investigated by VSM and found that the higher concentration of Li2CO3 reduces the hysteresis loss. DC resistivity increases with Li2CO3 contents whereas it decreases initially and then becomes constant at lower value with temperature which indicates that the studied samples are semiconductor. The dielectric dispersion occurs at a low-frequency regime and the loss peaks are formed in a higher frequency regime, which are due to the presence of resonance between applied frequency and hopping frequency of charge carriers. Notably, the loss peaks are shifted to the lower frequency with Li2CO3 additions.

Adsorption of the harmful hormone ethinyl estradiol inside hydrophobic cavities of CTA+ intercalated montmorillonite

2016 ◽  
Vol 74 (3) ◽  
pp. 663-671 ◽  
Author(s):  
A. E. Burgos ◽  
Tatiana A. Ribeiro-Santos ◽  
Rochel M. Lago
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
High Efficiency ◽  
Interlayer Space ◽  
Ethinyl Estradiol ◽  
Significant Loss ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrophobic Cavity ◽  
Adsorption Capacities ◽  
Derivative Thermogravimetry

Hydrophobic cavities produced by cetyltrimethylammonium cation (CTA+) exchanged and trapped in the interlayer space of montmorillonite were used to remove the harmful hormone contaminant ethinyl estradiol (EE2) from water. X-ray diffraction, thermogravimetry/derivative thermogravimetry, elemental analysis (carbon, hydrogen, nitrogen), Fourier transform infrared, scanning electron microscopy/energy dispersive spectroscopy, Brunauer–Emmett–Teller and contact angle analyses showed that the intercalation of 9, 16 and 34 wt% CTA+ in the montmorillonite resulted in the d001 expansion from 1.37 to 1.58, 2.09 and 2.18 nm, respectively. EE2 adsorption experiments showed that the original clay montmorillonite does not remove EE2 from water whereas the intercalated composites showed high efficiency with adsorption capacities of 4.3, 8.8 and 7.3 mg g−1 for M9CTA+, M16CTA+ and M34CTA+, respectively. Moreover, experiments with montmorillonite simply impregnated with cetyltrimethylammonium bromide showed that the intercalation of CTA+ to form the hydrophobic cavity is very important for the adsorption properties. Simple solvent extraction can be used to remove the adsorbed EE2 without significant loss of CTA+, which allows the recovery and reuse of the adsorbent for at least five times.

Studies Directed Towards the Total Synthesis of Anticapsin and Related Compounds. IV. Competitive Reaction of Amino and Carboxy Substituents in the Halohydrination of 2-Aminobicyclo[2.2.2]oct-5-ene-2-carboxylic Acid Derivatives

1994 ◽  
Vol 47 (12) ◽  
pp. 2221 ◽  
Author(s):  
MJ Crossley ◽  
SR Davies ◽  
TW Hambley
Keyword(s):  
Total Synthesis ◽  
The Other ◽  
X Ray Diffraction ◽  
Amino Groups ◽  
Competitive Reaction ◽  
Trimethylsilyl Group ◽  
X Ray ◽  
Tricyclic Compounds ◽  
Tricyclic Compound ◽  
Related Compounds

Bromohydrination of benzyl (1RS,2SR,4SR)-2-benzyloxycarbonylamino-1-trimethylsilyloxy-bicyclo[2.2.2]oct-5-ene-2-carboxylate (6a) and the (1RS,2RS,4SR)- diastereomer (6b) with N- bromoacetamide in aqueous dioxan has been investigated. These reactions are highly regio-and stereo-selective and give the corresponding bromohydrins (9a) and (9b), but in moderate to low yield. These bromohydrins have the necessary stereochemistry for conversion into anticapsin. The other products from the reaction are tricyclic compounds formed by capture of the anti- bromonium cation intermediates or resultant bromohydrins by interaction with the proximal protected carboxy and amino groups within the molecules. Thus the carbolactone (11) is formed from the endo -adduct (6a), and the carbonimidic acid derivative (12) and the cyclic urethane (13) are formed from the exo-adduct (6b). Cleavage of the trimethylsilyl group from the tricyclic compound (12) gives benzyl (1RS,2RS,3RS,7RS,8RS)-5-benzyloxy-2-bromo-8-hydroxy-4-oxa-6-azatricyclo[5.3.1.03,8]undec-5-ene-7-carboxylate(14), the structure of which was determined by X-ray diffraction methods and refined to a residual of 0.035 for 1549 independent observed reflections. The crystals of (14) are monoclinic, P21/c, a 12.954(3), b 6.197(3), c 26.784(7) Ǻ, β 95.33(2)°, Z 4. Reactions attempting to generate iodohydrins from the alkenes (6) were also highly regioselective and gave detrimethylsilylated iodo analogues of (11) and (13).

A Sulfide Ion Sensor from Commercial Bentonite

2014 ◽  
Vol 894 ◽  
pp. 412-415
Author(s):  
Duangsamorn Morawong ◽  
Atchana Wongchaisuwat ◽  
Ladda Meesuk
Keyword(s):  
Interlayer Space ◽  
Intercalation Compound ◽  
X Ray Diffraction ◽  
Solid Reaction ◽  
X Ray ◽  
Sulfide Ion ◽  
Best Response ◽  
Percent Recovery ◽  
Synonymous Term ◽  
Nernstian Slope

Bentonite is a synonymous term of montmorillonite which is a clay mineral consisting of 2 : 1 aluminosilicate layered structure. In this work, a commercial bentonite was used to prepare an intercalation compound [Ca (2,2-bipyridine)3]2+in the interlayer space, by solid-solid reaction, which formation was confirmed by the expansion of the interlayer space of bentonite from 1.5 to 1.8 nm, by powder X-Ray Diffraction technique. The intercalation compound [Ca (2,2-bipyridine)3]2+-bentonite was then used as a sensor to assemble a potentiometric electrode. The electrode gave best response to sulfide ion in terms of Nernstian slope. Precision of measurement, reproducibility and percent recovery were also studied. The electrode could be used to measure sulfide ion in real water samples and gave satisfactory results.

Molecular tapes in the structure of isoguaninium chloride

2017 ◽  
Vol 74 (1) ◽  
pp. 108-112 ◽  
Author(s):  
Urszula Anna Budniak ◽  
Paulina Maria Dominiak
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Charge Density ◽  
Interaction Energy ◽  
Electrostatic Interaction ◽  
Electrostatic Interactions ◽  
The Other ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Structure

Isoguanine, an analogue of guanine, is of intrinsic interest as a noncanonical nucleobase. The crystal structure of isoguaninium chloride (systematic name: 6-amino-2-oxo-1H,7H-purin-3-ium chloride), C5H6N5O+·Cl−, has been determined by single-crystal X-ray diffraction. Structure analysis was supported by electrostatic interaction energy (E es) calculations based on charge density reconstructed with the UBDB databank. In the structure, two kinds of molecular tapes are observed, one parallel to (010) and the other parallel to (50\overline{4}). The tapes are formed by dimers of isoguaninium cations interacting with chloride anions. E es analysis indicates that cations in one kind of tape are oriented so as to minimize repulsive electrostatic interactions.

Comparative Spectroscopic Studies on Luminescence Performance of Er3+ Doped Tellurite Glass Embedded with Different Nanoparticles (Ag Co and Fe) at 0.55 μm Emission

2021 ◽  
Vol 317 ◽  
pp. 81-86
Author(s):  
Syariffah Nurathirah Syed Yaacob ◽  
Md. Rahim Sahar ◽  
Faizani Mohd Noor ◽  
Nur Liyana Amiar Rodin ◽  
Siti Khadijah Mohd Zain ◽  
...  
Keyword(s):  
Energy Transfer ◽  
Ground State ◽  
Tellurite Glass ◽  
Spectroscopic Studies ◽  
The Other ◽  
X Ray Diffraction ◽  
Melt Quenching ◽  
X Ray ◽  
Doped Glass ◽  
Luminescence Performance

The spectroscopic performance of Er3+ doped glass at 0.55 mm emission contain different nanoparticles NPs have been comparatively evaluated. Glass containing 1.0 mol % of Er3+ doped with different NPs (Ag, Co and Fe ) have been prepared using melt quenching technique. X-ray diffraction analysis reveals the all the prepared samples are amorphous. The UV-Vis absorption spectra of all glasses show several prominent peaks at 525 nm, 660 nm, 801nm, 982 nm and 959 nm due to transition from ground state 4I15/2 to different excited of 2H11/2, 4F9/2, 4I9/2, 4I11/2, and 4I13/2. The emission of Er3+ at 0.55 mm for glass contain Ag NP shows significant enhancement about 3 folds up to 0.6 mol%. On the other hand, the emission of Er3+ at 0.55 mm for glass containing Fe NPs and Co NPs intensely quench probably due to the energy-transfer from Er3+ ion to NPs and magnetic contributions.

Influence of 3-{5-[4-(diethylamino)benzylidene]rhodanine}propionic acid on the conformation of 5-(4-chlorobenzylidene)-2-(4-methylpiperazin-1-yl)-3H-imidazol-4(5H)-one

2018 ◽  
Vol 74 (11) ◽  
pp. 1427-1433 ◽  
Author(s):  
Ewa Żesławska ◽  
Wojciech Nitek ◽  
Waldemar Tejchman ◽  
Jadwiga Handzlik
Keyword(s):  
Crystal Structures ◽  
Crystal Packing ◽  
Protonated Form ◽  
Acid Form ◽  
Asymmetric Unit ◽  
X Ray Diffraction ◽  
Basic Form ◽  
Piperazine Ring ◽  
X Ray ◽  
Intermolecular Contacts

The arylidene–imidazolone derivatives are a group of compounds of great interest in medicinal chemistry due to their various pharmacological actions. In order to study the possible conformations of an arylidene–imidazolone derivative, two new crystal structures were determined by X-ray diffraction, namely (Z)-5-(4-chlorobenzylidene)-2-(4-methylpiperazin-1-yl)-3H-imidazol-5(4H)-one, C15H17ClN4O, (6), and its salt 4-[5-(4-chlorobenzylidene)-5-oxo-4,5-dihydro-3H-imidazol-2-yl]-1-methylpiperazin-1-ium 3-{5-[4-(diethylamino)benzylidene]-4-oxo-2-thioxothiazolidin-3-yl}propionate, C15H18ClN4O+·C17H19N2O3S2 −, (7). Both compounds crystallize in the space group P\overline{1}. The basic form (6) crystallizes with two molecules in the asymmetric unit. In the acid form of (6), the N atom of the piperazine ring is protonated by proton transfer from the carboxyl group of the rhodanine acid derivative. The greatest difference in the conformations of (6) and its protonated form, (6c), is observed in the location of the arylidene–imidazolone substituent at the N atom. In the case of (6c), the position of this substituent is close to axial, while for (6), the corresponding position is intermediate between equatorial and axial. The crystal packing is dominated by a network of N—H...O hydrogen bonds. Furthermore, the crystal structures are stabilized by numerous intermolecular contacts of types C—H...N and C—H...Cl in (6), and C—H...O and C—H...S in (7). The geometry with respect to the location of the substituents at the N atoms of the piperazine ring was compared with other crystal structures possessing an N-methylpiperazine moiety.

Sign in / Sign up

Export Citation Format

Share Document