scholarly journals Orientation of Airborne Laser Scanning Point Clouds with Multi-View, Multi-Scale Image Blocks

Sensors ◽  
2009 ◽  
Vol 9 (8) ◽  
pp. 6008-6027 ◽  
Author(s):  
Petri Rönnholm ◽  
Hannu Hyyppä ◽  
Juha Hyyppä ◽  
Henrik Haggrén
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Multi Scale ◽  
Airborne Laser

scholarly journals An Adaptive Surface Interpolation Filter Using Cloth Simulation and Relief Amplitude for Airborne Laser Scanning Data

2021 ◽  
Vol 13 (15) ◽  
pp. 2938
Author(s):  
Feng Li ◽  
Haihong Zhu ◽  
Zhenwei Luo ◽  
Hang Shen ◽  
Lin Li
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Superior Performance ◽  
Cloth Simulation ◽  
Cloud Data ◽  
Interpolation Filter ◽  
Landscape Characteristics ◽  
Surface Interpolation ◽  
Airborne Laser

Separating point clouds into ground and nonground points is an essential step in the processing of airborne laser scanning (ALS) data for various applications. Interpolation-based filtering algorithms have been commonly used for filtering ALS point cloud data. However, most conventional interpolation-based algorithms have exhibited a drawback in terms of retaining abrupt terrain characteristics, resulting in poor algorithmic precision in these regions. To overcome this drawback, this paper proposes an improved adaptive surface interpolation filter with a multilevel hierarchy by using a cloth simulation and relief amplitude. This method uses three hierarchy levels of provisional digital elevation model (DEM) raster surfaces with thin plate spline (TPS) interpolation to separate ground points from unclassified points based on adaptive residual thresholds. A cloth simulation algorithm is adopted to generate sufficient effective initial ground seeds for constructing topographic surfaces with high quality. Residual thresholds are adaptively constructed by the relief amplitude of the examined area to capture complex landscape characteristics during the classification process. Fifteen samples from the International Society for Photogrammetry and Remote Sensing (ISPRS) commission are used to assess the performance of the proposed algorithm. The experimental results indicate that the proposed method can produce satisfying results in both flat areas and steep areas. In a comparison with other approaches, this method demonstrates its superior performance in terms of filtering results with the lowest omission error rate; in particular, the proposed approach retains discontinuous terrain features with steep slopes and terraces.

scholarly journals Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon

2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Francisco Mauro ◽  
Andrew T. Hudak ◽  
Patrick A. Fekety ◽  
Bryce Frank ◽  
Hailemariam Temesgen ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Field Measurements ◽  
Point Clouds ◽  
Semiparametric Models ◽  
Airborne Laser Scanning ◽  
Parametric Models ◽  
Fuel Load ◽  
Forest Fuels ◽  
Airborne Laser

Airborne laser scanning (ALS) acquisitions provide piecemeal coverage across the western US, as collections are organized by local managers of individual project areas. In this study, we analyze different factors that can contribute to developing a regional strategy to use information from completed ALS data acquisitions and develop maps of multiple forest attributes in new ALS project areas in a rapid manner. This study is located in Oregon, USA, and analyzes six forest structural attributes for differences between: (1) synthetic (i.e., not-calibrated), and calibrated predictions, (2) parametric linear and semiparametric models, and (3) models developed with predictors computed for point clouds enclosed in the areas where field measurements were taken, i.e., “point-cloud predictors”, and models developed using predictors extracted from pre-rasterized layers, i.e., “rasterized predictors”. Forest structural attributes under consideration are aboveground biomass, downed woody biomass, canopy bulk density, canopy height, canopy base height, and canopy fuel load. Results from our study indicate that semiparametric models perform better than parametric models if no calibration is performed. However, the effect of the calibration is substantial in reducing the bias of parametric models but minimal for the semiparametric models and, once calibrations are performed, differences between parametric and semiparametric models become negligible for all responses. In addition, minimal differences between models using point-cloud predictors and models using rasterized predictors were found. We conclude that the approach that applies semiparametric models and rasterized predictors, which represents the easiest workflow and leads to the most rapid results, is justified with little loss in accuracy or precision even if no calibration is performed.

scholarly journals Highway alignments extraction and 3D modeling from airborne laser scanning point clouds

2021 ◽  
Vol 102 ◽  
pp. 102429
Author(s):  
Yuzhou Zhou ◽  
Ronggang Huang ◽  
Tengping Jiang ◽  
Zhen Dong ◽  
Bisheng Yang
Keyword(s):  
3D Modeling ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Airborne Laser

scholarly journals Segmentation and Multi-Scale Convolutional Neural Network-Based Classification of Airborne Laser Scanner Data

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3347 ◽  
Author(s):  
Zhishuang Yang ◽  
Bo Tan ◽  
Huikun Pei ◽  
Wanshou Jiang
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Region Growing ◽  
Point Clouds ◽  
Classification Method ◽  
Multi Scale ◽  
Airborne Laser

The classification of point clouds is a basic task in airborne laser scanning (ALS) point cloud processing. It is quite a challenge when facing complex observed scenes and irregular point distributions. In order to reduce the computational burden of the point-based classification method and improve the classification accuracy, we present a segmentation and multi-scale convolutional neural network-based classification method. Firstly, a three-step region-growing segmentation method was proposed to reduce both under-segmentation and over-segmentation. Then, a feature image generation method was used to transform the 3D neighborhood features of a point into a 2D image. Finally, feature images were treated as the input of a multi-scale convolutional neural network for training and testing tasks. In order to obtain performance comparisons with existing approaches, we evaluated our framework using the International Society for Photogrammetry and Remote Sensing Working Groups II/4 (ISPRS WG II/4) 3D labeling benchmark tests. The experiment result, which achieved 84.9% overall accuracy and 69.2% of average F1 scores, has a satisfactory performance over all participating approaches analyzed.

scholarly journals MULTISPECTRAL AIRBORNE LASER SCANNING FOR AUTOMATED MAP UPDATING

2016 ◽  
Vol XLI-B3 ◽  
pp. 323-330 ◽  
Author(s):  
Leena Matikainen ◽  
Juha Hyyppä ◽  
Paula Litkey
Keyword(s):  
Change Detection ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Sensor Technology ◽  
Classification Error ◽  
Surface Model ◽  
Airborne Laser ◽  
Map Updating

During the last 20 years, airborne laser scanning (ALS), often combined with multispectral information from aerial images, has shown its high feasibility for automated mapping processes. Recently, the first multispectral airborne laser scanners have been launched, and multispectral information is for the first time directly available for 3D ALS point clouds. This article discusses the potential of this new single-sensor technology in map updating, especially in automated object detection and change detection. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from a random forests analysis suggest that the multispectral intensity information is useful for land cover classification, also when considering ground surface objects and classes, such as roads. An out-of-bag estimate for classification error was about 3% for separating classes asphalt, gravel, rocky areas and low vegetation from each other. For buildings and trees, it was under 1%. According to feature importance analyses, multispectral features based on several channels were more useful that those based on one channel. Automatic change detection utilizing the new multispectral ALS data, an old digital surface model (DSM) and old building vectors was also demonstrated. Overall, our first analyses suggest that the new data are very promising for further increasing the automation level in mapping. The multispectral ALS technology is independent of external illumination conditions, and intensity images produced from the data do not include shadows. These are significant advantages when the development of automated classification and change detection procedures is considered.

scholarly journals ANALYSIS OF 3D BUILDING MODELS ACCURACY BASED ON THE AIRBORNE LASER SCANNING POINT CLOUDS

2018 ◽  
Vol XLII-2 ◽  
pp. 797-804 ◽  
Author(s):  
W. Ostrowski ◽  
M. Pilarska ◽  
J. Charyton ◽  
K. Bakuła
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
3D Models ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Statistical Parameters ◽  
Airborne Laser ◽  
Building Models

Creating 3D building models in large scale is becoming more popular and finds many applications. Nowadays, a wide term “3D building models” can be applied to several types of products: well-known CityGML solid models (available on few Levels of Detail), which are mainly generated from Airborne Laser Scanning (ALS) data, as well as 3D mesh models that can be created from both nadir and oblique aerial images. City authorities and national mapping agencies are interested in obtaining the 3D building models. Apart from the completeness of the models, the accuracy aspect is also important. Final accuracy of a building model depends on various factors (accuracy of the source data, complexity of the roof shapes, etc.). In this paper the methodology of inspection of dataset containing 3D models is presented. The proposed approach check all building in dataset with comparison to ALS point clouds testing both: accuracy and level of details. Using analysis of statistical parameters for normal heights for reference point cloud and tested planes and segmentation of point cloud provides the tool that can indicate which building and which roof plane in do not fulfill requirement of model accuracy and detail correctness. Proposed method was tested on two datasets: solid and mesh model.

scholarly journals Using Leaf-Off and Leaf-On Multispectral Airborne Laser Scanning Data to Characterize Seedling Stands

2020 ◽  
Vol 12 (20) ◽  
pp. 3328
Author(s):  
Mohammad Imangholiloo ◽  
Ninni Saarinen ◽  
Markus Holopainen ◽  
Xiaowei Yu ◽  
Juha Hyyppä ◽  
...  
Keyword(s):  
Tree Species ◽  
Laser Scanning ◽  
Sustainable Forest Management ◽  
Single Channel ◽  
Point Clouds ◽  
Tree Density ◽  
Airborne Laser Scanning ◽  
Tree Species Composition ◽  
Coniferous Trees ◽  
Airborne Laser

Information from seedling stands in time and space is essential for sustainable forest management. To fulfil these informational needs with limited resources, remote sensing is seen as an intriguing alternative for forest inventorying. The structure and tree species composition in seedling stands have created challenges for capturing this information using sensors providing sparse point densities that do not have the ability to penetrate canopy gaps or provide spectral information. Therefore, multispectral airborne laser scanning (mALS) systems providing dense point clouds coupled with multispectral intensity data theoretically offer advantages for the characterization of seedling stands. The aim of this study was to investigate the capability of Optech Titan mALS data to characterize seedling stands in leaf-off and leaf-on conditions, as well as to retrieve the most important forest inventory attributes, such as distinguishing deciduous from coniferous trees, and estimating tree density and height. First, single-tree detection approaches were used to derive crown boundaries and tree heights from which forest structural attributes were aggregated for sample plots. To predict tree species, a random forests classifier was trained using features from two single-channel intensities (SCIs) with wavelengths of 1550 (SCI-Ch1) and 1064 nm (SCI-Ch2), and multichannel intensity (MCI) data composed of three mALS channels. The most important and uncorrelated features were analyzed and selected from 208 features. The highest overall accuracies in classification of Norway spruce, birch, and nontree class in leaf-off and leaf-on conditions obtained using SCI-Ch1 and SCI-Ch2 were 87.36% and 69.47%, respectively. The use of MCI data improved classification by up to 96.55% and 92.54% in leaf-off and leaf-on conditions, respectively. Overall, leaf-off data were favorable for distinguishing deciduous from coniferous trees and tree density estimation with a relative root mean square error (RMSE) of 37.9%, whereas leaf-on data provided more accurate height estimations, with a relative RMSE of 10.76%. Determining the canopy threshold for separating ground returns from vegetation returns was found to be critical, as mapped trees might have a height below one meter. The results showed that mALS data provided benefits for characterizing seedling stands compared to single-channel ALS systems.

A novel skyline context descriptor for rapid localization of terrestrial laser scans to airborne laser scanning point clouds

2020 ◽  
Vol 165 ◽  
pp. 120-132
Author(s):  
Fuxun Liang ◽  
Bisheng Yang ◽  
Zhen Dong ◽  
Ronggang Huang ◽  
Yufu Zang ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Airborne Laser

scholarly journals Segmentation of LiDAR Data Using Multilevel Cube Code

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
So-Young Park ◽  
Dae Geon Lee ◽  
Eun Jin Yoo ◽  
Dong-Cheon Lee
Keyword(s):  
Spatial Data ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Lidar Data ◽  
Chain Code ◽  
Cloud Data ◽  
Airborne Laser ◽  
Wide Range ◽  
Scanning Systems

Light detection and ranging (LiDAR) data collected from airborne laser scanning systems are one of the major sources of spatial data. Airborne laser scanning systems have the capacity for rapid and direct acquisition of accurate 3D coordinates. Use of LiDAR data is increasing in various applications, such as topographic mapping, building and city modeling, biomass measurement, and disaster management. Segmentation is a crucial process in the extraction of meaningful information for applications such as 3D object modeling and surface reconstruction. Most LiDAR processing schemes are based on digital image processing and computer vision algorithms. This paper introduces a shape descriptor method for segmenting LiDAR point clouds using a “multilevel cube code” that is an extension of the 2D chain code to 3D space. The cube operator segments point clouds into roof surface patches, including superstructures, removes unnecessary objects, detects the boundaries of buildings, and determines model key points for building modeling. Both real and simulated LiDAR data were used to verify the proposed approach. The experiments demonstrated the feasibility of the method for segmenting LiDAR data from buildings with a wide range of roof types. The method was found to segment point cloud data effectively.

Sign in / Sign up

Export Citation Format

Share Document