scholarly journals Using Leaf-Off and Leaf-On Multispectral Airborne Laser Scanning Data to Characterize Seedling Stands

2020 ◽  
Vol 12 (20) ◽  
pp. 3328
Author(s):  
Mohammad Imangholiloo ◽  
Ninni Saarinen ◽  
Markus Holopainen ◽  
Xiaowei Yu ◽  
Juha Hyyppä ◽  
...  
Keyword(s):  
Tree Species ◽  
Laser Scanning ◽  
Sustainable Forest Management ◽  
Single Channel ◽  
Point Clouds ◽  
Tree Density ◽  
Airborne Laser Scanning ◽  
Tree Species Composition ◽  
Coniferous Trees ◽  
Airborne Laser

Information from seedling stands in time and space is essential for sustainable forest management. To fulfil these informational needs with limited resources, remote sensing is seen as an intriguing alternative for forest inventorying. The structure and tree species composition in seedling stands have created challenges for capturing this information using sensors providing sparse point densities that do not have the ability to penetrate canopy gaps or provide spectral information. Therefore, multispectral airborne laser scanning (mALS) systems providing dense point clouds coupled with multispectral intensity data theoretically offer advantages for the characterization of seedling stands. The aim of this study was to investigate the capability of Optech Titan mALS data to characterize seedling stands in leaf-off and leaf-on conditions, as well as to retrieve the most important forest inventory attributes, such as distinguishing deciduous from coniferous trees, and estimating tree density and height. First, single-tree detection approaches were used to derive crown boundaries and tree heights from which forest structural attributes were aggregated for sample plots. To predict tree species, a random forests classifier was trained using features from two single-channel intensities (SCIs) with wavelengths of 1550 (SCI-Ch1) and 1064 nm (SCI-Ch2), and multichannel intensity (MCI) data composed of three mALS channels. The most important and uncorrelated features were analyzed and selected from 208 features. The highest overall accuracies in classification of Norway spruce, birch, and nontree class in leaf-off and leaf-on conditions obtained using SCI-Ch1 and SCI-Ch2 were 87.36% and 69.47%, respectively. The use of MCI data improved classification by up to 96.55% and 92.54% in leaf-off and leaf-on conditions, respectively. Overall, leaf-off data were favorable for distinguishing deciduous from coniferous trees and tree density estimation with a relative root mean square error (RMSE) of 37.9%, whereas leaf-on data provided more accurate height estimations, with a relative RMSE of 10.76%. Determining the canopy threshold for separating ground returns from vegetation returns was found to be critical, as mapped trees might have a height below one meter. The results showed that mALS data provided benefits for characterizing seedling stands compared to single-channel ALS systems.

scholarly journals EVALUATING THE POSSIBILITY OF TREE SPECIES CLASSIFICATION WITH DUAL-WAVELENGTH ALS DATA

2019 ◽  
Vol XLII-2/W13 ◽  
pp. 1097-1103
Author(s):  
M. Pilarska ◽  
W. Ostrowski
Keyword(s):  
Spatial Data ◽  
Tree Species ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Tree Canopy ◽  
Species Classification ◽  
Airborne Laser ◽  
Simultaneous Acquisition

<p><strong>Abstract.</strong> Airborne laser scanning (ALS) plays an important role in spatial data acquisition. One of the advantages of this technique is laser beam penetration through vegetation, which makes it possible to not only obtain data on the tree canopy but also within and under the canopy. In recent years, multi-wavelength airborne laser scanning has been developed. This technique consists of simultaneous acquisition of point clouds in more than one band. The aim of this experiment was to examine and assess the possibilities of tree segmentation and species classification in an urban area. In this experiment, point clouds registered in two wavelengths (532 and 1064&amp;thinsp;nm) were used for tree segmentation and species classification. The data were acquired with a Riegl VQ-1560i-DW laser scanner over Elblag, Poland, during August 2018. Tree species collected by a botanist team within terrain measurements were used as a reference in the classification process. Within the experiment segmentation and classification process were performed. Regarding the segmentation, TerraScan software and Li et al.’s algorithm, implemented in LidR package were used. Results from both methods are clearly over-segmented in comparison to the manual segments. In Terrasolid segmentation, single reference segments are over-segmented in 28% of cases, whereas, for LidR, over-segmentation occurred in 73% of the segments. According the classification results, Thuja, Salix and Betula were the species, for which the highest classification accuracy was achieved.</p>

scholarly journals Qualifying the Information Detected from Airborne Laser Scanning to Support Tropical Forest Management Operational Planning

Forests ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1724
Author(s):  
Cristiano Rodrigues Reis ◽  
Eric Bastos Gorgens ◽  
Danilo Roberti Alves de Almeida ◽  
Carlos Henrique Souza Celes ◽  
Jacqueline Rosette ◽  
...  
Keyword(s):  
Forest Management ◽  
Tropical Forest ◽  
Laser Scanning ◽  
Sustainable Forest Management ◽  
Point Clouds ◽  
Field Work ◽  
Airborne Laser Scanning ◽  
Operational Planning ◽  
Amazon Forest ◽  
Airborne Laser

(1) Background: Forests throughout the world are managed to fulfil a range of commercial and ecosystem services. The same applies to managed areas of the Amazon forest. We explore a method of sustainable forest management (SFM) which anticipates the result of processes of natural mortality of large, mature trees that could fall and damage their neighbors. Collecting all the information required for planning logging in the Brazilian Amazon is, currently, a hard, time-consuming and expensive task. (2) Methods: This information can be obtained more quickly, accurately and objectively by including airborne laser scanning (ALS) products in the operational plan. We used ALS point clouds to isolate emergent crowns from the canopy height model. Then, we performed field work to validate the existence of these trees, and to understand how many commercial trees (tree diameter ≥ 50 cm) we identified by orienting the trees search through the emergent canopy model. (3) Results: We were able to detect 184 (54.4%) trees from 338 field-recorded individuals in 20 plots (totaling 8 ha). Of the detected trees, 66 individuals were classified as having potential for commerce. Furthermore, 58 individuals presented the best stem quality for logging, which represents more than seven high quality commercial trees per hectare. The logistic regression showed that the effects that positively influence the emergent crown formation are strongly presented in the commercial species. (4) Conclusions: Using airborne laser scanning can improve the SFM planning in a structurally complex, dense and mixed composition tropical forest by reducing field work in the initial stages of management. Therefore, we propose that ALS operational planning can be used to more efficiently direct field surveys without the need for a full census.

scholarly journals Classification of tree species composition using a combination of multispectral imagery and airborne laser scanning data

2017 ◽  
Vol 63 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Maroš Sedliak ◽  
Ivan Sačkov ◽  
Ladislav Kulla
Keyword(s):  
Species Composition ◽  
Tree Species ◽  
Laser Scanning ◽  
Airborne Laser Scanning ◽  
Tree Species Composition ◽  
Object Based Image Analysis ◽  
Airborne Laser ◽  
Object Based ◽  
Individual Trees

AbstractRemote Sensing provides a variety of data and resources useful in mapping of forest. Currently, one of the common applications in forestry is the identification of individual trees and tree species composition, using the object-based image analysis, resulting from the classification of aerial or satellite imagery. In the paper, there is presented an approach to the identification of group of tree species (deciduous - coniferous trees) in diverse structures of close-to-nature mixed forests of beech, fir and spruce managed by selective cutting. There is applied the object-oriented classification based on multispectral images with and without the combination with airborne laser scanning data in the eCognition Developer 9 software. In accordance to the comparison of classification results, the using of the airborne laser scanning data allowed identifying ground of terrain and the overall accuracy of classification increased from 84.14% to 87.42%. Classification accuracy of class “coniferous” increased from 82.93% to 85.73% and accuracy of class “deciduous” increased from 84.79% to 90.16%.

scholarly journals An Adaptive Surface Interpolation Filter Using Cloth Simulation and Relief Amplitude for Airborne Laser Scanning Data

2021 ◽  
Vol 13 (15) ◽  
pp. 2938
Author(s):  
Feng Li ◽  
Haihong Zhu ◽  
Zhenwei Luo ◽  
Hang Shen ◽  
Lin Li
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Superior Performance ◽  
Cloth Simulation ◽  
Cloud Data ◽  
Interpolation Filter ◽  
Landscape Characteristics ◽  
Surface Interpolation ◽  
Airborne Laser

Separating point clouds into ground and nonground points is an essential step in the processing of airborne laser scanning (ALS) data for various applications. Interpolation-based filtering algorithms have been commonly used for filtering ALS point cloud data. However, most conventional interpolation-based algorithms have exhibited a drawback in terms of retaining abrupt terrain characteristics, resulting in poor algorithmic precision in these regions. To overcome this drawback, this paper proposes an improved adaptive surface interpolation filter with a multilevel hierarchy by using a cloth simulation and relief amplitude. This method uses three hierarchy levels of provisional digital elevation model (DEM) raster surfaces with thin plate spline (TPS) interpolation to separate ground points from unclassified points based on adaptive residual thresholds. A cloth simulation algorithm is adopted to generate sufficient effective initial ground seeds for constructing topographic surfaces with high quality. Residual thresholds are adaptively constructed by the relief amplitude of the examined area to capture complex landscape characteristics during the classification process. Fifteen samples from the International Society for Photogrammetry and Remote Sensing (ISPRS) commission are used to assess the performance of the proposed algorithm. The experimental results indicate that the proposed method can produce satisfying results in both flat areas and steep areas. In a comparison with other approaches, this method demonstrates its superior performance in terms of filtering results with the lowest omission error rate; in particular, the proposed approach retains discontinuous terrain features with steep slopes and terraces.

scholarly journals Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon

2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Francisco Mauro ◽  
Andrew T. Hudak ◽  
Patrick A. Fekety ◽  
Bryce Frank ◽  
Hailemariam Temesgen ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Field Measurements ◽  
Point Clouds ◽  
Semiparametric Models ◽  
Airborne Laser Scanning ◽  
Parametric Models ◽  
Fuel Load ◽  
Forest Fuels ◽  
Airborne Laser

Airborne laser scanning (ALS) acquisitions provide piecemeal coverage across the western US, as collections are organized by local managers of individual project areas. In this study, we analyze different factors that can contribute to developing a regional strategy to use information from completed ALS data acquisitions and develop maps of multiple forest attributes in new ALS project areas in a rapid manner. This study is located in Oregon, USA, and analyzes six forest structural attributes for differences between: (1) synthetic (i.e., not-calibrated), and calibrated predictions, (2) parametric linear and semiparametric models, and (3) models developed with predictors computed for point clouds enclosed in the areas where field measurements were taken, i.e., “point-cloud predictors”, and models developed using predictors extracted from pre-rasterized layers, i.e., “rasterized predictors”. Forest structural attributes under consideration are aboveground biomass, downed woody biomass, canopy bulk density, canopy height, canopy base height, and canopy fuel load. Results from our study indicate that semiparametric models perform better than parametric models if no calibration is performed. However, the effect of the calibration is substantial in reducing the bias of parametric models but minimal for the semiparametric models and, once calibrations are performed, differences between parametric and semiparametric models become negligible for all responses. In addition, minimal differences between models using point-cloud predictors and models using rasterized predictors were found. We conclude that the approach that applies semiparametric models and rasterized predictors, which represents the easiest workflow and leads to the most rapid results, is justified with little loss in accuracy or precision even if no calibration is performed.

scholarly journals Highway alignments extraction and 3D modeling from airborne laser scanning point clouds

2021 ◽  
Vol 102 ◽  
pp. 102429
Author(s):  
Yuzhou Zhou ◽  
Ronggang Huang ◽  
Tengping Jiang ◽  
Zhen Dong ◽  
Bisheng Yang
Keyword(s):  
3D Modeling ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Airborne Laser

scholarly journals MULTISPECTRAL AIRBORNE LASER SCANNING FOR AUTOMATED MAP UPDATING

2016 ◽  
Vol XLI-B3 ◽  
pp. 323-330 ◽  
Author(s):  
Leena Matikainen ◽  
Juha Hyyppä ◽  
Paula Litkey
Keyword(s):  
Change Detection ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Sensor Technology ◽  
Classification Error ◽  
Surface Model ◽  
Airborne Laser ◽  
Map Updating

During the last 20 years, airborne laser scanning (ALS), often combined with multispectral information from aerial images, has shown its high feasibility for automated mapping processes. Recently, the first multispectral airborne laser scanners have been launched, and multispectral information is for the first time directly available for 3D ALS point clouds. This article discusses the potential of this new single-sensor technology in map updating, especially in automated object detection and change detection. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from a random forests analysis suggest that the multispectral intensity information is useful for land cover classification, also when considering ground surface objects and classes, such as roads. An out-of-bag estimate for classification error was about 3% for separating classes asphalt, gravel, rocky areas and low vegetation from each other. For buildings and trees, it was under 1%. According to feature importance analyses, multispectral features based on several channels were more useful that those based on one channel. Automatic change detection utilizing the new multispectral ALS data, an old digital surface model (DSM) and old building vectors was also demonstrated. Overall, our first analyses suggest that the new data are very promising for further increasing the automation level in mapping. The multispectral ALS technology is independent of external illumination conditions, and intensity images produced from the data do not include shadows. These are significant advantages when the development of automated classification and change detection procedures is considered.

Sign in / Sign up

Export Citation Format

Share Document