scholarly journals Swelling-Based Distributed Chemical Sensing with Standard Acrylate Coated Optical Fibers

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 718
Author(s):  
Sina Sedighi ◽  
Marcelo A. Soto ◽  
Alin Jderu ◽  
Dorel Dorobantu ◽  
Marius Enachescu ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Chemical Sensing ◽  
Low Cost ◽  
Refractive Index Change ◽  
Water Quality Monitoring ◽  
Medical Diagnostics ◽  
Optical Frequency Domain Reflectometry ◽  
Frequency Domain Reflectometry ◽  
Agriculture Water

Distributed chemical sensing is demonstrated using standard acrylate coated optical fibers. Swelling of the polymer coating induces strain in the fiber’s silica core provoking a local refractive index change which is detectable all along an optical fiber by advanced distributed sensing techniques. Thermal effects can be discriminated from strain using uncoated fiber segments, leading to more accurate strain readings. The concept has been validated by measuring strain responses of various aqueous and organic solvents and different chain length alkanes and blends thereof. Although demonstrated on a short range of two meters using optical frequency-domain reflectometry, the technique can be applied to many kilometer-long fiber installations. Low-cost and insensitive to corrosion and electromagnetic radiation, along with the possibility to interrogate thousands of independent measurement points along a single optical fiber, this novel technique is likely to find applications in environmental monitoring, food analysis, agriculture, water quality monitoring, or medical diagnostics.

scholarly journals Swelling-Based Chemical Sensing With Unmodified Optical Fibers

2021 ◽  
Author(s):  
Alin Jderu ◽  
Dorel Dorobantu ◽  
Dominik Ziegler ◽  
Marius Enachescu
Keyword(s):  
Water Quality ◽  
Optical Fibers ◽  
Food Processing ◽  
Chemical Sensing ◽  
Low Cost ◽  
Water Quality Monitoring ◽  
Medical Diagnostics ◽  
Distributed Sensing ◽  
Quality Monitoring ◽  
Strain Sensing

AbstractWe use distributed fiber optic strain sensing to examine swelling of the fiber’s polymer coating. The distributed sensing technique that uses unmodified low-cost telecom fibers opens a new dimension of applications that include leak detection, monitoring of water quality, and waste systems. On a short-range length scale, the technology enables “lab-on-a-fiber” applications for food processing, medicine, and biosensing for instance. The chemical sensing is realized with unmodified low-cost telecom optical fibers, namely, by using swelling in the coating material of the fiber to detect specific chemicals. Although generic and able to work in various areas such as environmental monitoring, food analysis, agriculture or security, the proposed chemical sensors can be targeted for water quality monitoring, or medical diagnostics where they present the most groundbreaking nature. Moreover, the technique is without restrictions applicable to longer range installations.

scholarly journals Fabrication of Optical Fibers with Multiple Coatings for Swelling-Based Chemical Sensing

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 941
Author(s):  
Dorel Dorobantu ◽  
Alin Jderu ◽  
Marius Enachescu ◽  
Dominik Ziegler
Keyword(s):  
Optical Fibers ◽  
Chemical Sensing ◽  
Simultaneous Detection ◽  
Principal Component ◽  
Water Quality Monitoring ◽  
Medical Diagnostics ◽  
Single Fiber ◽  
Volume Changes ◽  
Fiber Optical ◽  
Agriculture Water

We discuss distributed chemical sensing based on the swelling of coatings of optical fibers. Volume changes in the coating induce strain in the fiber’s glass core, provoking a local change in the refractive index which is detectable by distributed fiber optical sensing techniques. We describe methods to realize different coatings on a single fiber. Simultaneous detection of swelling processes all along the fiber opens the possibility to interrogate thousands of differently functionalized sections on a single fiber. Principal component analysis is used to enable sensors for environmental monitoring, food analysis, agriculture, water quality monitoring, or medical diagnostics.

scholarly journals Vortex Polymer Optical Fiber with 64 Stable OAM States

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2776
Author(s):  
José A. Borda-Hernández ◽  
Claudia M. Serpa-Imbett ◽  
Hugo E. Hernandez Figueroa
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Communication Systems ◽  
Low Cost ◽  
Higher Order ◽  
Coupling Coefficients ◽  
Polymer Optical Fiber ◽  
Optical Polymer ◽  
Polymer Optical Fibers ◽  
Low Dispersion

This research introduces a numerical design of an air-core vortex polymer optical fiber in cyclic transparent optical polymer (CYTOP) that propagates 32 orbital angular momentum (OAM) modes, i.e., it may support up to 64 stable OAM-states considering left- and right-handed circular polarizations. This fiber seeks to be an alternative to increase the capacity of short-range optical communication systems multiplexed by modes, in agreement with the high demand of low-cost, insensitive-to-bending and easy-to-handle fibers similar to others optical fibers fabricated in polymers. This novel fiber possesses unique characteristics: a diameter of 50 µm that would allow a high mechanical compatibility with commercially available polymer optical fibers, a difference of effective index between neighbor OAM modes of around 10−4 over a bandwidth from 1 to 1.6 µm, propagation losses of approximately 15 × 10−3 dB/m for all OAM modes, and a very low dispersion for OAM higher order modes (±l = 16) of up to +2.5 ps/km-nm compared with OAM lower order modes at a telecom wavelength of 1.3 µm, in which the CYTOP exhibits a minimal attenuation. The spectra of mutual coupling coefficients between modes are computed considering small bends of up to 3 cm of radius and slight ellipticity in the ring of up to 5%. Results show lower-charge weights for higher order OAM modes.

scholarly journals An Optical Fiber Chemical Sensor for the Detection of Copper(II) in Drinking Water

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5246 ◽  
Author(s):  
Pesavento ◽  
Profumo ◽  
Merli ◽  
Cucca ◽  
Zeni ◽  
...  
Keyword(s):  
Drinking Water ◽  
Optical Fiber ◽  
Optical Fibers ◽  
Chemical Sensor ◽  
Low Cost ◽  
Self Assembled Monolayer ◽  
Ph Values ◽  
Highly Sensitive ◽  
Selective Sensor

Highly sensitive plasmonic optical fiber platforms combined with receptors have been recently used to obtain selective sensors. A low-cost configuration can be obtained exploiting a D-shaped plastic optical fiber covered with a multilayer sensing surface. The multilayer consists of a gold film, functionalized with a specific receptor, where the surface plasmon resonance (SPR) occurs. The signal is produced by the refractive index variation occurring as a consequence of the receptor-to analyte binding. In this work, a selective sensor for copper(II) detection in drinking water, exploiting a self-assembled monolayer (SAM) of d,l-penicillamine as the sensing layer, has been developed and tested. Different concentrations of copper(II) in NaCl 0.1 M solutions at different pH values and in a real matrix (drinking water) have been considered. The results show that the sensor is able to sense copper(II) at concentrations ranging from 4 × 10-6 M to 2 × 10-4 M. The use of this optical chemical sensor is a very attractive perspective for fast, in situ and low-cost detection of Cu(II) in drinking water for human health concerns. Furthermore, the possibility of remote control is feasible as well, because optical fibers are employed.

Fabrication of an Atomic Resolution Low Cost STM-SNOM Hybrid Probe

2006 ◽  
Vol 6 (1) ◽  
pp. 72-76
Author(s):  
Ruggero Micheletto ◽  
Masatoshi Yokokawa ◽  
Satoshi Okazakaki ◽  
Yoichi Kawakami
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Chemical Etching ◽  
Low Cost ◽  
Resolving Power ◽  
Atomic Resolution ◽  
Hybrid Fiber ◽  
Horizontal Scale ◽  
Simple Method ◽  
One Step

We derived a simple method to fabricate STM-SNOM hybrid probes obtained from commercial cheap communication optical fibers. The tips are fabricated by a methodology that combines two well-known techniques: the selective attack by a buffered solution and the protected layer chemical etching, in a single new one-step technique. The tailored probes are then sputtered by metal and mounted on a STM setup. The usual difficulties of integrating the optical fiber in the STM head are solved originally with a particular home made mount described in details. We will show that the resulting probes reach atomic resolution on both vertical and horizontal scale, and that the optical imaging is free of artifacts and satisfactory with a lateral resolution in the order of λ/20, as far as we know the finest resolution obtained with a system based on a hybrid fiber probe. We believe that our methodology is very interesting for its simplicity of realization and for the good resolving power in both SNOM and STM modes.

Optical-Fiber Sensors: An Overview

MRS Bulletin ◽  
2002 ◽  
Vol 27 (5) ◽  
pp. 365-369 ◽  
Author(s):  
D. J. Webb
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Material Characterization ◽  
Chemical Sensing ◽  
Optical Fiber Sensors ◽  
Bragg Grating ◽  
Fiber Sensors ◽  
Fiber Sensing ◽  
Recent Developments ◽  
Optical Fiber Sensing

AbstractThis article provides an overview of the field of optical-fiber sensing, including a brief introduction to the properties of optical fibers that make them suitable for material characterization and monitoring. Some of the recent developments in the field are described, with an emphasis on Bragg grating sensors, multiplexed systems, and chemical sensing, as well as the new field of microstructured fiber.

scholarly journals Smartphone-Based Optical Fiber Sensor for the Assessment of a Fed-Batch Bioreactor

2020 ◽  
Vol 2 (1) ◽  
pp. 26
Author(s):  
Marco César Prado Soares ◽  
Thiago Destri Cabral ◽  
Pedro Machado Lazari ◽  
Matheus dos Santos Rodrigues ◽  
Gildo Santos Rodrigues ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fibers ◽  
Sucrose Concentration ◽  
Low Cost ◽  
Optical Fiber Sensor ◽  
Refraction Index ◽  
Fed Batch ◽  
Pixel Intensity ◽  
Batch Bioreactor ◽  
Sensing Platform

Industry is currently in a period of great expansion, the so-called “Industry 4.0”. This period relies on the development of new sensor technologies for the generation of systems capable of collecting, distributing, and delivering information. Particularly in chemical and biochemical industries, the development of portable monitoring devices can improve many process parameters, such as safety and productivity. In this work, the design of a smartphone-based optical fiber sensing platform for the online assessment of fed-batch fermentation systems is reported. The setup is comprised of a smartphone equipped with a 3D-printed case that couples optical fibers to the phone, and of an application for collecting images from the camera and then analyzing the pixel intensity. Finally, the obtained intensities are correlated to the broth refraction index, which is function of the sucrose concentration. We calculated the sensitivity of this sensor as 85.83 RIU−1 (refractive index units), and then compared its performance to results obtained with a handheld refractometer and with Monod model predictions. It showed to be a reliable, portable, and low-cost instrument for the online monitoring of bioreactors that can be easily reproducible on-site by simply printing it.

Sign in / Sign up

Export Citation Format

Share Document